I Drive a Can Am Maverick R for the First Time; Then Break It!

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 162

  • @richrules
    @richrules  Рік тому +52

    Who is surprised? Lol

    • @GarSeeYaa
      @GarSeeYaa Рік тому +4

      That must have gotten missed in QC, would have happend to anyone driving it.

    • @brandonpanozzo86
      @brandonpanozzo86 Рік тому +1

      Rich rules baby!!!

    • @rockkhound943
      @rockkhound943 Рік тому +3

      Not at all lol. Not ypyr fault dude . Factory fk'up

    • @dustyfarmer
      @dustyfarmer Рік тому +3

      Must be a Friday or Monday build car. Or then again it could just be a Tuesday, Wednesday or Thursday build Can-Am.

    • @emoney2272
      @emoney2272 Рік тому

      Not one person

  • @kenkaplan4413
    @kenkaplan4413 Рік тому +21

    What a coincidence that the first non-sponsored Turbo R video the car breaks. Get ready for more videos like this. I have touched every bolt on my 2017 xrs which is why I trust it. Yes, everybody builds crap nowadays. The people who design cars are a little brighter than the ones who assemble them.

    • @jakeyoung661
      @jakeyoung661 Рік тому +3

      I had a 19 xrs then a 21 xrs. The 19 was solid. The 21 (covid car I called it) litteraly had fasteners all through the front end that were finger lose the day I brought it home from the dealer. Upper and lower control arm bolts never tightened. Thing sounded like it was falling apart on the first ride. You'd think these are ready to rip in new condition but they aren't.

    • @scatty_jack1859
      @scatty_jack1859 8 місяців тому

      DEI assemblers

    • @Williamxmr
      @Williamxmr 3 місяці тому

      This aged like milk lol

  • @rockkhound943
    @rockkhound943 Рік тому +24

    Not uncommon anymore for there to be loose fasteners on brand new ohv's . Ive found a few over the years on friends new sxs's . I recommend everyone bolts check your new rig .

    • @jasonlara1943
      @jasonlara1943 Рік тому +2

      for 50 grand you think they would tighten everything. I have never tight anything on my 20 grand yxz everything is tight.

    • @scottzimmerman6485
      @scottzimmerman6485 Рік тому

      loose bolt is bad enough but missing cotter pin ? glad it was a rear fail and not a steering fail

  • @nicks9795
    @nicks9795 Рік тому +5

    I picked up my new x3 a couple months ago, highly disappointed in the build quality and lack of care, loose bolts nuts and rivits sitting in damn near every crevasse, found multiple loose bolts and t30’s. No crush washers on either drain plug. Nut and bolt everything!

    • @robertgomez5248
      @robertgomez5248 Рік тому

      2 of my brake line bango bolts were finger tight and leaking on my X3.

    • @criticalthinking3709
      @criticalthinking3709 Рік тому

      Oh man my 2022 Polaris Pro XP Ultimate was anything but Ultimate. Bought it in August 2022, 2 weeks later Polaris sends out a Stop Ride/Stop Sale recall on the fuel flange and it lasts for 7 months! Tells everyone to pound sand and suck it up. Things a rattletrap, squeaking and banging every time I put in drive. I was hoping Can Am was better but now I’m not sure….

  • @stevenjacobson8177
    @stevenjacobson8177 Рік тому +7

    That’s a really bad sign. Radius rod looked mighty thin. Sad. Didn’t beat on it at alll not even a real world test. 😒

  • @RamRhino
    @RamRhino Рік тому +17

    He got to one befor sxsblog dang Rich rules baby

    • @jeffidubb
      @jeffidubb Рік тому

      That’s cause their sxs content sucks ass now

    • @andrewhorton5730
      @andrewhorton5730 Рік тому +3

      Easy there killer. They just spent all week at utv invasion and there were a few out there running around. Both channels are always killing it.

    • @jeffidubb
      @jeffidubb Рік тому +7

      @@andrewhorton5730 there content is 90% shop or burnouts now. It’s completely different and almost non sxs related. Sorry fan boy but dirt dudes are killin it and sxs is commercial

    • @RamRhino
      @RamRhino Рік тому +3

      @@jeffidubb I agree 👍 dirt dudes is my new favorite sxs channel sxsblog got away from what they use to do

    • @jeffidubb
      @jeffidubb Рік тому +2

      @@RamRhino thank you. They deserve a lot more clout than they are getting. Sxs just trying to be like Cletus

  • @Slappyracecars
    @Slappyracecars Рік тому +7

    Note to self. Nut and bolt check your new car. Lol

  • @rxmichael5454
    @rxmichael5454 Рік тому +1

    did the guy with the pro r drive the maverick r cause I have the same one would love to know his thoughts on both

  • @nealfox1976
    @nealfox1976 Рік тому +3

    Can am need to check quality control???

  • @SnapbackFPV
    @SnapbackFPV Рік тому +1

    I really want one of these but the lack of quality control continues to be a major issue. Panel gaps I can “deal with” but this is a huge safety issue.

  • @nwhuckin7761
    @nwhuckin7761 Рік тому +12

    Definitely a warranty issue, don’t beat yourself up about that! The dealer needs to pull the wheels and tires and go over every nut and bolt on these things. Not the first broken one either with a few people snapping the front lower an arm. Hope you get one soon, still thinking it will be a good machine with the bugs worked out

  • @FusionOffroad
    @FusionOffroad Рік тому +2

    I am not a Cam-am guy but after watching the Mavrick R on the short track it look like it handled great. It was Great meeting you there. keep up the good work

  • @mikejones044
    @mikejones044 Рік тому +2

    What happend to sxs blog ?

  • @captainairbus3215
    @captainairbus3215 Рік тому

    Which one is better, the RZR pro or Mawerick?

  • @ryandupont4104
    @ryandupont4104 Рік тому +7

    Nice to see a $40+ machine just falls apart on its own lol

  • @TravNasty520
    @TravNasty520 Рік тому +9

    There is no worse feeling than breaking someone else’s machine even if it’s your fault or not… trust me I’ve been there before

    • @cwisted5308
      @cwisted5308 Рік тому

      Completely agree with you on that. Horrible feeling

  • @chrisgoetz3889
    @chrisgoetz3889 Рік тому +3

    See that's exactly why i am a Whalen speed customer for life 👍😁

  • @josephbartkowski8825
    @josephbartkowski8825 Рік тому

    Nice video I own a pro r 2 seater do you think the drag race would be different comparing apples to apples I mean 2 seat versus 2 seat ? Is the knew can am tapped out on that the 3 cylinder turbo just curious your guys thoughts

  • @rideswift
    @rideswift Рік тому +7

    Just picked up my 2023 Renegade 650 a few weeks ago. I was very disappointed with the overall build quality. loose fasteners every where. found a cross threaded bolt on battery hold down, display was crooked in the mount. All other Can am I've owned were perfect, but its been a few years since I owned a new one and this pissed me off. BTW, every Ski Doo I've owned (I buy a new Xrs every year or 2) has been flawless. Ski Doo are still built in Canada, Can am are built in Mexico, I guess that's the difference.

  • @christianemino06
    @christianemino06 Рік тому

    Rich rules finally representing Whalen speed !!!

  • @JohnSmith-tx3ys
    @JohnSmith-tx3ys Рік тому

    Newbie here. Is this typical for canam?

  • @wraith511802003
    @wraith511802003 Рік тому +1

    quality build Can am.. lol some one forgot the locktite

  • @thelifeoffastony1157
    @thelifeoffastony1157 Рік тому +1

    Can't believe it's a single sheer radius rod end.. didn't can am learned from the 2017 can am X3... FML.

  • @michi_danksta
    @michi_danksta 11 місяців тому

    "I thought I heard a pop coming out of woods" yet I kept going til I killed it goul style. 😅

  • @GK-gr2mx
    @GK-gr2mx Рік тому +2

    Well this is first broke maverick r I’ve seen so far 😂😂

  • @stepheno.2730
    @stepheno.2730 Рік тому +1

    It’s no secret that can am uses as little material as possible in their machines and build them as cheaply as possible. You basically had to reinforce the entire x3 chassis just to make it usable and reliable. No surprises here. Same “can” just more ham.

    • @70GTODAN
      @70GTODAN Рік тому +1

      Agreed!! Can am uses very thin metal damn near everywhere on their machines!! Funny to me how everyone screams crap about other brands (especially SPEED) but they dont say much when polaris or can am break on the first day.

  • @Upracefan
    @Upracefan Рік тому +2

    QC was on break when that unit came off the line!

  • @tannerherrington8914
    @tannerherrington8914 Рік тому

    Why aren’t you with the SXSBLOG guys anymore?

  • @covewater
    @covewater Рік тому +2

    You wasn't even beating on it what the heck!?

  • @thegooniverse495
    @thegooniverse495 Рік тому +7

    What a hunk of junk. Rocks and logs are going to be a nightmare for this suspension front and rear!

    • @dustyfarmer
      @dustyfarmer Рік тому

      I can see those front wheels when turning corners are going to coat the driver & passenger & inside the car with mud & dirt & be impossible to control the muck thrown up by the wheels being so far out from the front fenders.

  • @brycesanders5402
    @brycesanders5402 Рік тому +2

    Probably no cotter pin from the factory and the nut backed out. Otherwise the car was sure rippin when it broke. Surprised to see the wheels had balancing weights from the factory when you pulled it off

  • @ultra4suzukisamurai679
    @ultra4suzukisamurai679 Рік тому +1

    Top notch build quality

  • @G35Jeesh
    @G35Jeesh Рік тому +3

    You weren't even being hard on it thats crazy it broke that easy ....

  • @jimmace6148
    @jimmace6148 Рік тому

    I saw pics of one with a broken front A-Arm. But I'm not sure if it was broke out in the wild. Think it was at the sand show.

  • @dustyfarmer
    @dustyfarmer Рік тому +1

    I had the same thing on my then new 2015 Polaris RZR1000XP with a finger tight nyloc nut on the front pivot bolt of the rear trailing arm & a generally poor finish on my new 2021 Can-am Maverick X3 Turbo RR with plenty of missing washers & panel bolts on one side. Quality control on assembly in the factory is highly suspect & pre-delivery preparation consists of cut the tie down straps off & pump the tyres up & take the customers money. I check all the nuts and bolts for tightness before I ride anything from new.

  • @Orrinsparkman98
    @Orrinsparkman98 Рік тому +1

    Has the reason ever been said why you left sxs blog? Are y’all still friends? Speaking terms I for sure thought I would see a get together every once in awhile

  • @ronaldwriston1546
    @ronaldwriston1546 Рік тому

    Rich rules lookin jacked. And as usual ripping way harder then the the sxs boys.

  • @Mr_Beegs
    @Mr_Beegs Рік тому +2

    That thing looked fast!

  • @gary3046
    @gary3046 Рік тому +3

    Dealer will probably have to open their mail in order to get part numbers! 😄

  • @Ride-Fly
    @Ride-Fly Рік тому

    That front suspension looks so Funny im really surprised they went with that.

  • @stevenjacobson8177
    @stevenjacobson8177 Рік тому +1

    Rich rules the land the sea and the racetrack baby !

  • @stevekalis3963
    @stevekalis3963 Рік тому

    Happy I found your channel. Can Am owes you a test unit.

  • @mikemiller9119
    @mikemiller9119 Рік тому

    You said the steering was so much better. But through the corners without a berm you were turned quite a bit before it would start to turn.

  • @oliverrobey6973
    @oliverrobey6973 Рік тому

    The way the new front end is designed it feels like it's floating when you're driving it you almost forget to steer

  • @michaelmessner3169
    @michaelmessner3169 Рік тому +1

    LOL Rich breaks it again. Rich Rules - the first Rule is if it can break - Rich will

  • @vintagetrikesandquads4012
    @vintagetrikesandquads4012 Рік тому +1

    Can't see it being your fault. It looks like the bolt wasn't tighten or cotter pin installed at the factory.

  • @scottperry2541
    @scottperry2541 Рік тому

    The hood won't stay on right??

  • @majorskillz6235
    @majorskillz6235 Рік тому

    When do the 4 seaters come out dammit!!!

  • @kylebeach2316
    @kylebeach2316 Рік тому

    Factory recall? 🤔

  • @Robert-mv8dw
    @Robert-mv8dw Рік тому +1

    Who ever designed this
    Is a genius😎

    • @wasupfool5692
      @wasupfool5692 Рік тому

      Nothing wrong with the design, anything breaks if the factory don't tighten bolts 😂

  • @phillipwatson810
    @phillipwatson810 Рік тому +1

    That says a lot about their Quality Control, there is no way if it was assembly right.That should happen.

  • @eastcoastriders1267
    @eastcoastriders1267 Рік тому +1

    id say warranty claim for sure lol. No bolt or cotter pin XD

  • @TwistedSXS
    @TwistedSXS Рік тому

    Very fitting. Lol is it the DCT that clunks the whole time? Yes before it broke, on decel especially.

  • @GearHardoffRoad
    @GearHardoffRoad Рік тому +5

    Can ams fault. You didnt even beat on it! My 22 outlander had missing grease zerks and loose drive shaft bolts from factory!! Come on can am grow up!!

  • @uazbuchanka2206
    @uazbuchanka2206 Рік тому

    With my words...
    I own and handle here in germany a brandnew MAVERICK XRS MAX TURBO RR and every time I found any issue's and quality problems....
    But in fact the "R" - Version costs here in germany 60k!!!!
    60k's for problems and poor quality check and so on, that's not acceptable!

  • @Gemini-kl1wn
    @Gemini-kl1wn Рік тому

    I'm very satisfied with my entry level '23 X3 DS for half the price of the R model.

  • @mandytuning
    @mandytuning Рік тому +1

    First one to find a weak point,Rich rules!!!

  • @pyrostwistedride4821
    @pyrostwistedride4821 Рік тому +1

    That is definitely a poor mark against the dealer. Someone got paid to PDI the machine, and more time should always be spent when it is a newly released model.

  • @123..0.
    @123..0. Рік тому

    You are know to push machines to the limit. I'd call that a good trial

  • @thejourneyretold
    @thejourneyretold Рік тому

    Its like it never went through a Quality Control check and I bet the nut wasnt even tight...or maybe it was never even on there because it should've had a cotter pin through it...

  • @oliverrobey6973
    @oliverrobey6973 Рік тому

    See I didn't like the way the front end makes it feel it makes you feel like it's floating and steering itself what do you think Rick

    • @AMetalWorks
      @AMetalWorks Рік тому

      If you want more steering feel and feedback run a wheel that sticks out a little more. Just remember that doing this reverses the benefits from their suspension/steering design.

  • @tedlambert1988
    @tedlambert1988 Рік тому +1

    My saying if your hand never touched it, don't trust it. Always check them little nuts and bolts even if it's factory

  • @christianrivlive
    @christianrivlive Рік тому

    Thing holds up good needs a better driver tho to really put this thing to the test

  • @carltrano1325
    @carltrano1325 Рік тому

    Learning experience obviously any owner of a new or used machine should go nuts to bolt and not trust that quality control was 100%.

  • @patrickquinn1330
    @patrickquinn1330 Рік тому

    Still wish we knew why you and the sxsblog guys parted ways, the channel isnt the same without you

  • @kenleppek
    @kenleppek Рік тому +1

    At lease it wasn't an axle

  • @RTOutdoors
    @RTOutdoors Рік тому +1

    Rich rules has entered legendary status. Hopefully that’s just a poor PDI by the dealer.

  • @jefflawsonqwest
    @jefflawsonqwest Рік тому +2

    100% not on you. Love the X3’s, but you do have to put a wrench on everything before anything else. Sucks for the cost.

  • @GarSeeYaa
    @GarSeeYaa Рік тому +3

    Richrules baby!

  • @jerrywilcox9890
    @jerrywilcox9890 Рік тому +7

    Car looks ugly in the front. Control arms look like crap.

  • @josedelgado3893
    @josedelgado3893 Рік тому

    It's obvious it was assembly problems at the dealer

  • @chrisbelzer3713
    @chrisbelzer3713 Рік тому +1

    Flashback to donuts on the razor

  • @BassheadStewie
    @BassheadStewie Рік тому

    Bolt check before every ride

  • @SuperReddog17
    @SuperReddog17 Рік тому

    we'll you really wern't driving it hard so i would say it's the dealers falt or the factory's falt the bolt came off.

  • @markbooth7657
    @markbooth7657 Рік тому +1

    I'd buy some rr stickers

  • @Image-X
    @Image-X Рік тому

    Definitely not any driver’s fault. The dealer or factory is likely to blame.

  • @johncurtiss4989
    @johncurtiss4989 Рік тому +1

    Definitely not your bad outside of the break nice rig you need to add one to your fleet.

  • @j_roddaboss2257
    @j_roddaboss2257 Рік тому

    I still have no idea why they split and I need to know. They don’t even talk to each other or feature in videos together snd I just need to know what happened that was so bad it warrants that behavior

  • @hjfcoco
    @hjfcoco Рік тому

    Dude, your lucky 😂

  • @williamtufts3600
    @williamtufts3600 Рік тому

    Can-Am Q.C. strikes again.

  • @paperboy371
    @paperboy371 Рік тому

    Those arms need to be matte black/dark grey

  • @Rubbermeetsrd
    @Rubbermeetsrd Рік тому

    Weak radius rods on a Can Am ?Never heard of it .

  • @stevencherrett-eb6zh
    @stevencherrett-eb6zh Рік тому

    The dealership that you got it from or Wayland speed got it from I should say needs to warranty that s*** and call the dealership on it be like what the fuc

  • @mitchellholroyd2837
    @mitchellholroyd2837 Рік тому

    What a bummer 😕. Shit happens though.

  • @avioncamper
    @avioncamper Рік тому +1

    Warranty repair. Lack of QC.

  • @RJ-wy6cx
    @RJ-wy6cx Рік тому

    Don't sneeze on it you might bend something

  • @Berm_Blaster
    @Berm_Blaster Рік тому +1

    Goid to see you getting back to your roots. You ripping the dunes in a fast can am is why I follow you. I'm not really into boats and Cadillac body swapped chevy trucks. I watch those videos to support you but this video right here is why.... RICH RULES BABYYY 🤘

  • @grumpyg9350
    @grumpyg9350 Рік тому

    Latest news, assembly employee fired from can am Monday morning.😊

  • @danvandenbrink4899
    @danvandenbrink4899 Рік тому

    Looks and acts like a boat anchor

  • @saeedalhameli826
    @saeedalhameli826 Рік тому

    Then why pay 45k for this quality

  • @imagri1
    @imagri1 Рік тому +2

    Hmm, weird…. Wouldn’t be like can am to not tighten the hardware properly….

  • @johninwv807
    @johninwv807 Рік тому

    Someone that actually knows to keep his thumbs out of the steering wheel spokes, good on ya!

  • @jl644
    @jl644 Рік тому

    "Never fix the things that isn't broken".. They should have stick with the same design and added the 7 gear transmission would have been golden... Stupid.

  • @kevingallagher3
    @kevingallagher3 Рік тому

    35k machine and can am assembly plant can’t even do the basics of QC… I see lower prices in our future gentleman and ladies.

  • @ronaldmarshall4054
    @ronaldmarshall4054 Рік тому +4

    I'm tired of all of the SAND BS put it in some mud how is riding in sand fun

    • @mdean619
      @mdean619 Рік тому

      And some hard packed whoops, not speed bumps, real desert whoops. All I have seen is sand and fire roads and they still break.

  • @G35Jeesh
    @G35Jeesh Рік тому

    EPIC.

  • @Loop307
    @Loop307 Рік тому

    Look at this dude. Lol. Come on

  • @danvandenbrink4899
    @danvandenbrink4899 Рік тому

    Good machine lmao

  • @agarciagarcia7815
    @agarciagarcia7815 Рік тому

    I live more my x3 Xmr 2022

  • @americanduramax
    @americanduramax Рік тому

    I stopped at 6 minutes in. Wish you would have pushed it harder, you let off the gas on all the jumps i saw.