Gaurav Agrawal He wants the water molecules to get in to a crystalline form, so he means melting point (a bit NaCl in water will make the melting point drop a few degrees).
@taraisthelaw He explains it later. Basically, the solute will prevent water molecules to assemble into lattice structure, thus lowering the melting/freezing point. But it will also raise the boiling point because solute particles at the surface will be blocking some of the vapor from escaping. Since boiling happens when vapor pressure equals atm pressure, you would need even more heat that once needed in order to compensate for the loss of vapor pressure due to the solute at the surface.
You might look at editing this one. You say lower melting point, but wirte lower boiling point. This would be very confusing to someone that is learning this for the first time.
dude...its lowering melting point...melting refers to solid to liquid phase...freezing refers to liquid to solid phase.....boiling refers to liquid to gas and condensation refers to gas to liquid....sublimation refers to solid to gas phase
@@gauravagrawal8141 Addition of the solute to a pure liquid solvent causes the need for a much lower temperature for freezing, and a much greater temperature for boiling.
Kindly make a video on raoults law when both components are volatile. And how raoults law is the best criterion to judge wether a solution is ideal. Kindly make it as soon as possible
When multiplying the mols by the amount of ions, in your case 2, Na+ and Cl-. It would probably help if you explained the Van't Hoff Factor and add it to the equation.T = i k m were i is the van't Hoff factor. just a suggestion,love the videos by the way, Your saving several students money
You sir are an epic teacher :) I actually dropped the subject Chemistry, trying to pick it back up again. Physics REALLY helps to understand chemistry though.
@Jan Leunissen Funny to read a comment of mine from so long ago (wrote it during high school)! Now expecting to obtain my PhD in condensed matter physics next year. Thanks for this!
Solute lowers freezing point/melting point. (That's why we have a freezing point DEPRESSION formula) Solute raises boiling point. (That's why we have a boiling point ELEVATION formula).
I drank a -30 degree beer one time; I added CaCl2 to the beer and then cooled it down with dry ice. It would have been great except the CaCl2 affects the taste too much, giving it a pasty consistency.
famguy218 It comes with practice and repetition. Do something enough and it "becomes a part of you". When a person starts driving a stick shift it feels like there is a million things to get right and pay attention to. Even just a few months later it can be as natural as breathing. Or for another example, working a cash register at McDonald's. When I was 16 and looked at that register with literally over 100 different buttons, and saw experienced employees able to ring up customers "in real time" without having to hunt and peck for each item it seemed amazing. 2 weeks later I was better than them. Once a person grasps that all new information will normally look way more complex than it is, it can bring a lot of confidence. Knowing that information can be absorbed and learned just like every thing else a person has done in life can demystify a topic considered highly complex. In the past, I've kept a lot of these videos on repeat for days at a time. The first time I might absorb 5% and be baffled by the rest. The second time, because I have a small amount of understanding to build on, I might get another 10%. By the 4th or 5th or 6th time, it all starts making sense. The key is to not be afraid of "feeling dumb" and understand that that feeling is (for a lot of people) a normal part of learning. If you can ignore it and push ahead anyway, progress comes a lot more quickly because you aren't beating yourself up for not understanding. That's why a person watches these videos in the first place. It's information you don't have and don't understand. You're not going to get it right away, just like driving or learning any other new skill. But eventually, chemistry or calculus, or physics, or anything else can become part of you and something you can do as easily as breathing. It's just a matter of time and repetition. Some people take more of that than others but I'll end with one if my favorite quotes: "What one person can do, another can do."
Dear Dr.Khan, Your vedios are excellent, thank you. But in this one you have a small error, you do say the right thing that once something is added into water (solute added to a solvent) it lowers the freezing point and increases the boiling point, but you wrote it lowers the boiling point instead of writing it lowers the freezing point. Maybe you can just write a note on the side bar about it instead of remaking, Thank you again.
From what I understand, salt has twice as much effect as glucose, since it dissociates. So does that mean it doesn't matter how large the solute molecules are?
what exactly is the change in temperature referring to? It is the change in temp in respect to the pure solvent? Or is it the change in respect to initial and final conditions?
the pure solvent. However you could use the same formula to calculate initial and final conditions. Delta T doesn't have to be of the pure solvent, it can be of a solution.
Thanks. I got it. Thought about it...the Mol-Thing. The origin. The definition. The number. Why they defined it. They relation to C12. And atomic mass unit...C12 again. They other way around is helpful for me... without water...100 Na and 100 Cl turn into "only" 100 NaCls. (And not 200 NaCls). :-) Thanks. You are helpful as always.
@khanacademy but prof., doesn't NaCl only disassociate when it dissolves? and when it dissolves, it's no longer a solute in a solvent, right? i also have trouble intuiting why the size of the respective atoms would not make a difference in affecting boiling/melting points.
Isn't the higher boiling point because of water having higher attraction to the solvent ions than to itself? And so the solvent keeps the water more together.
In my pre-lab assignment The formula for molality is: n Solute/MMsolute x Kg solvent. Does anybody knows where the MM solute come from? In al textbooks the formula for molality is just: moles solute/Kg solvent. :S
Evaporation is a surface phenomenon. Molecules in the bulk gain energy and escape from the surface. More surface area implies more space for molecules to escape.
according to the video, the addition of solute raises the boiling point of a substance. If this is the case, why is it commonplace for people to add salt to water to hasten its boiling? just curious, not a smart-ass.
+Cory Christopher I have to disagree that it's commonplace for people to add salt to water to hasten its boiling. To flavor whatever is going to be cooked in that water, yes, but not to hasten its boiling. Personally, I would always add the salt after the water has begun to boil, so that I didn't have to spend extra time waiting for the water to actually start boiling. (Source: I cook quite a fair bit)
no offence but nobody cares about your initial misconceptions. you risk teaching people incorrect facts which they will have to re-learn later by underscoring your own errors. by the way, not everyone thinks like you: to some people it is intuitive that presence of solute will raise boiling point and lower freezing point this is a counterproductive teaching method seen in many youtube education videos. helpful: underscoring an apparent paradox; not helpful: underscoring something incorrect which you will later amend, presumably (i did not watch the video to the end)
Not sure if anyone else noticed but he wrote lower boiling point when he meant freezing point at about 4:00
+Spencer Simko yeah ..correct..even no one corrected it
+RAJESH PATEL :/ On the _actual_ website, just yea... XD
By lowering the freezing point he means that it is harder to freeze, and also harder to boil as well.. Correct me if I'm wrong :/
because boiling and freezing are processes that move in opposite directions, making something harder to freeze actually makes it easier to boil
CholoYeol Plus, freezing involves liquids & solids while boiling involves liquids & _gases_!
i like how he corrects himself on the boiling point and then writes it anyway
so is it lowering the melting point or boiling point?
Gaurav Agrawal He wants the water molecules to get in to a crystalline form, so he means melting point (a bit NaCl in water will make the melting point drop a few degrees).
I love how he has america's next top model on his dashboard when he is showing the sim. LOL (6:49)
6:15 is why adding salt to water to make it boil faster actually does the opposite and makes it boil slower!
7:07 "One of the neat things in life is that the answer is actually quite simple."
Khan Academy getting philosophical!!
I love how he has Khan Academy bookmarked
100 NaCls would disassociate into 100 Na and 100 Cl or 200 ions. Mole is just a number like 100.
@taraisthelaw He explains it later. Basically, the solute will prevent water molecules to assemble into lattice structure, thus lowering the melting/freezing point. But it will also raise the boiling point because solute particles at the surface will be blocking some of the vapor from escaping. Since boiling happens when vapor pressure equals atm pressure, you would need even more heat that once needed in order to compensate for the loss of vapor pressure due to the solute at the surface.
ur way better than my chem teacher. im gonna start skipping chem
You might look at editing this one. You say lower melting point, but wirte lower boiling point. This would be very confusing to someone that is learning this for the first time.
so is it lowering the melting point or boiling point?
dude...its lowering melting point...melting refers to solid to liquid phase...freezing refers to liquid to solid phase.....boiling refers to liquid to gas and condensation refers to gas to liquid....sublimation refers to solid to gas phase
@@gauravagrawal8141 Addition of the solute to a pure liquid solvent causes the need for a much lower temperature for freezing, and a much greater temperature for boiling.
@@gauravagrawal8141 Lowers the melting point and increases the boiling point.
Thank you. Your video clears some things out for me.
America's next top model😂...did anyone notice?
Thanx! 😊
Kindly make a video on raoults law when both components are volatile. And how raoults law is the best criterion to judge wether a solution is ideal. Kindly make it as soon as possible
When multiplying the mols by the amount of ions, in your case 2, Na+ and Cl-. It would probably help if you explained the Van't Hoff Factor and add it to the equation.T = i k m were i is the van't Hoff factor. just a suggestion,love the videos by the way, Your saving several students money
I like how one of his bookmarks,when he pulls up his internet browser, is America's next top model.
You sir are an epic teacher :) I actually dropped the subject Chemistry, trying to pick it back up again. Physics REALLY helps to understand chemistry though.
@Jan Leunissen Funny to read a comment of mine from so long ago (wrote it during high school)! Now expecting to obtain my PhD in condensed matter physics next year.
Thanks for this!
when he made the ice structure, he made it square, but its acually hexagonal
Thank you, this makes my life easy; when teachers suck cxx.
Dr Khan, you are an important part of my degree !
6:42 did anyone notice that he bookmarked "America's Next Top Model"? lol
americas next top model, me too
I agree. Without those little mistakes this guys videos would be awesome. As with this one, that mistake makes it even more confusing.
Soo Sal watchu doing on America's next top model page?
+MrShadowstar27 😂
Skip to 4:05
I wish I could talk just like Carl Sagan...the way this guy does.
Solute lowers freezing point/melting point. (That's why we have a freezing point DEPRESSION formula)
Solute raises boiling point. (That's why we have a boiling point ELEVATION formula).
6:30 Boiler up!
he's the best tutor for everything
Thank you :)
Awesome vid! Thank you so much! :D
(Btw, 5:35 you misspelled 'pressure'.)
idiot
I drank a -30 degree beer one time; I added CaCl2 to the beer and then cooled it down with dry ice. It would have been great except the CaCl2 affects the taste too much, giving it a pasty consistency.
Literally nothing in that comment is chemically possible.
jazakaAllahu khairun
Thank you
very educative video
Watching just before 2 hours of my exam 😂
So ...You Are Late ..!
Same😹
I don't get how you know so much information and remember all of it.
famguy218 It comes with practice and repetition. Do something enough and it "becomes a part of you". When a person starts driving a stick shift it feels like there is a million things to get right and pay attention to. Even just a few months later it can be as natural as breathing. Or for another example, working a cash register at McDonald's. When I was 16 and looked at that register with literally over 100 different buttons, and saw experienced employees able to ring up customers "in real time" without having to hunt and peck for each item it seemed amazing. 2 weeks later I was better than them.
Once a person grasps that all new information will normally look way more complex than it is, it can bring a lot of confidence. Knowing that information can be absorbed and learned just like every thing else a person has done in life can demystify a topic considered highly complex.
In the past, I've kept a lot of these videos on repeat for days at a time. The first time I might absorb 5% and be baffled by the rest. The second time, because I have a small amount of understanding to build on, I might get another 10%. By the 4th or 5th or 6th time, it all starts making sense. The key is to not be afraid of "feeling dumb" and understand that that feeling is (for a lot of people) a normal part of learning. If you can ignore it and push ahead anyway, progress comes a lot more quickly because you aren't beating yourself up for not understanding.
That's why a person watches these videos in the first place. It's information you don't have and don't understand. You're not going to get it right away, just like driving or learning any other new skill. But eventually, chemistry or calculus, or physics, or anything else can become part of you and something you can do as easily as breathing.
It's just a matter of time and repetition. Some people take more of that than others but I'll end with one if my favorite quotes:
"What one person can do, another can do."
how to decrease boiling point of water?
hm its all independent of surface area... result is correct but surface area actually has nothing to do with it.
see wiki.
Why does that formula make sense??:)
Dear Dr.Khan,
Your vedios are excellent, thank you.
But in this one you have a small error, you do say the right thing that once something is added into water (solute added to a solvent) it lowers the freezing point and increases the boiling point, but you wrote it lowers the boiling point instead of writing it lowers the freezing point.
Maybe you can just write a note on the side bar about it instead of remaking,
Thank you again.
I'm mad at UA-cam for not showing this as 1st search result
❤
Sal Likes Americas Next top Model!!!!
I wish you were my chemistry teacher.
america’s next top model, huh?
From what I understand, salt has twice as much effect as glucose, since it dissociates. So does that mean it doesn't matter how large the solute molecules are?
Ironically nobody has ever answered your question from 11y's , let me answer it.
Yes it doesn't matter how large the solute molecules are.🤣🤣
when vapor pressure and atmospheric pressure are in equilibrium, then boiling point happens
thank you SO MUCH.
khanacademy is my life
do you have a video doing calculation for freeze point depression for an unknown molecular compound?
what exactly is the change in temperature referring to? It is the change in temp in respect to the pure solvent? Or is it the change in respect to initial and final conditions?
the pure solvent. However you could use the same formula to calculate initial and final conditions. Delta T doesn't have to be of the pure solvent, it can be of a solution.
thanks
really helpful! why i didn't i discover your videos earlier in the year? haha definetly going to watch all of your vids before my apchem exam!!
I think Sal actually means lower the freezing point at 3:26
Thanks. I got it. Thought about it...the Mol-Thing. The origin. The definition. The number. Why they defined it. They relation to C12. And atomic mass unit...C12 again.
They other way around is helpful for me... without water...100 Na and 100 Cl turn into "only" 100 NaCls. (And not 200 NaCls). :-)
Thanks. You are helpful as always.
Amazing explanation sir !
I now started loving chemistry just because of you. Thanks a lot lot !
america's next top model 6:30 o_o
@MrPengwin3
i noticed that as well
These videos make me happy. Have this useless comment of gratitude.
thanks man
So at 3:26 should it be lower freezing point not boiling?
Look at that old web browser..
@khanacademy but prof., doesn't NaCl only disassociate when it dissolves? and when it dissolves, it's no longer a solute in a solvent, right? i also have trouble intuiting why the size of the respective atoms would not make a difference in affecting boiling/melting points.
good explanation. Love it. I read so many text books but no one explain how could that happen. All they talk about is entropy.
Isn't the higher boiling point because of water having higher attraction to the solvent ions than to itself? And so the solvent keeps the water more together.
youve been watching Americas Next top model :P
i bet he is the best a draw something
Wouldn't the freezing point be depressed,if solute particles had been smaller than water molecules?
3:30, lower freezing*
Who is here in 2022 🙂
and what about the graph due to boiling point elevation...??? In my text book it's so jumbled up I don't understand
sir what about the melting point and also the boiling point
In my pre-lab assignment The formula for molality is: n Solute/MMsolute x Kg solvent. Does anybody knows where the MM solute come from? In al textbooks the formula for molality is just: moles solute/Kg solvent. :S
how do i know that vapor pressure equals the atmospheric pressure ?
Vapor pressure is determined by the total pressure along with the pressure of the solution. Look up Dalton's Law of partial pressure.
2 moles of something dissociate in 4 moles of two somethings ?! Mole is still a confusing concept.... for me....
will my teacher giv me it during the quiz or should i solve for K and how?
so.... how do u find K?
Please video, please save me from my exam in 6 hours...
***** Yep!
LOWER MELTING POINTTTTTTTTTTT
Can someone answer me? we in the class used osmolarity instead of molality why?
Molality is better when dealing with temperature. Osmolarity deals with volume which changes when the temperature changes.
At 3:32, you said Solute --> Lower boiling point. Then at 6:09 you said again, Solute -->raising boiling point, what?!?
how does sugar dissolve in water ??
It's based on the polarity. Glucose is a polar molecule, and so is water. Therefore, they can combine.
Wait, so more surface area=more evaporation?
Evaporation is a surface phenomenon. Molecules in the bulk gain energy and escape from the surface. More surface area implies more space for molecules to escape.
Lower boiling point or melting point !! Anyone please answer
Lower melting/freezing point, higher boiling/condensing point
(about to die on ap exam?)
um sal, why are you watching americas next top model?
Please upload advance chemistry videos
So do non-ionic bonds always have a value of 1 as the i?
It's a simple yes.
2023 gang
according to the video, the addition of solute raises the boiling point of a substance. If this is the case, why is it commonplace for people to add salt to water to hasten its boiling? just curious, not a smart-ass.
+Cory Christopher I have to disagree that it's commonplace for people to add salt to water to hasten its boiling. To flavor whatever is going to be cooked in that water, yes, but not to hasten its boiling. Personally, I would always add the salt after the water has begun to boil, so that I didn't have to spend extra time waiting for the water to actually start boiling. (Source: I cook quite a fair bit)
It would be the same concept as a pressure cooker. Raise the boiling to point to lower your cooking time.
SAVE ME FROM MY EXAM!!!😞😔😒😣
J co until th
Lol me here in 2020
Does anyone know the freezing point of a 0.527 aqueous solution of libr???
just something from yahoo
@MrPengwin3 hahahahahaha oh dear
?
not your best video, I think this one deserves a remake.
A decade later...stfu
no offence but nobody cares about your initial misconceptions. you risk teaching people incorrect facts which they will have to re-learn later by underscoring your own errors. by the way, not everyone thinks like you: to some people it is intuitive that presence of solute will raise boiling point and lower freezing point
this is a counterproductive teaching method seen in many youtube education videos. helpful: underscoring an apparent paradox; not helpful: underscoring something incorrect which you will later amend, presumably (i did not watch the video to the end)
thank you