This is the build o was talking about I whould love to get one like this with a 10 inch barrel and like the Walmart gun video short cause I'm saving up to get into playing with hpa one day
Whats up bro. I was wondering if you had experienced low air pressure with your Pulsar? Trying to see what settings are decent to get me over 300 fps with 0.25 bb
@iiAnferny I will say I had issues with my first installation getting fps and I found the nozzle was actually too long and causing the bucking to loose seal. I shimmed the hop up forward a bit and accuracy was 100% better and fps went way up. Pull the nozzle all the way out slide your hop up over it and look down the barrel with a light see if you have a perfect seal or is the nozzle getting pushed back in. Hope that helps.
@@JJMoore Appreciate you homie!! I was wondering why everything was so quiet when I took it to the field the other day lol. I'll check it out when I get a chance. Oringally I snagged the wire for the fcu and had to solder it back, thinking that was the issue. 🥴
@@iiAnferny any issues I run into with them I will post to try and help the community so far everything has been on bucking and barrel end of it. other than one out the box had a wire torn off the harness ez solider and it was back in action.
Hello do you have a pics of v2 bluetooth titan for hpa , my soder joints came off i was trying to shoot and no power , i just cant find a image of where the power supply suppose ro soder to thanks @JJMoore
It’s because the pulsar s needs the correct bucking to resolve the swerve just grab a G&G green and use a maxx m4p hop up and shim it correctly to meet the bucking just right and it will straighten out.
It depends on what you want to do with it if you need air efficiency and precise tuning get the f2 if you want a fast gun with optical trigger response get the pulsar.👍
Hey I put a pulsar in my cm16 and it has some alignment issues and midcap syndrome... it was a very tight fit aswell I had to dremel. Wish it would shoot straight
@warren- yeah man I ended sorting the problem. I had the purple nozzle that I swapped out to the new gold nozzle. Got a eon hop up and that fixed the mid cap syndrome. Then I had to rotate my engine left or right depending on what way it was curving. At the same time I got a zci 6.02 tb inner barrel with the elvish tec patch to flap hop it and I got a omega nub.. shoots okay now
Been waiting to see one of these installed and tested. Looks awesome. Can’t wait to get mine
Got mine installed on my hpa krytac lvoa c, best choice I ever made lol
Another badass build my dude!!!! You are the best in the business.
Bro thank you so much I am trying to keep ahead of the game it’s hard all you guys keep me going hard. 😁
Everytime I see a new video my day gets better (and your son helped me put in a polarstar for my gun)
Awesome bro glad he was helpful and I love making peoples day. Thanks for watching
Treasure box!
They are still testing them in Australia for gel blasters and they are a nice gearbox, look like the aussie made raw mk tactical hpa gearbox
Bro that is awesome I want and need one really bad now after this video haha wow
I have you one out back let me know when your ready I will build you a one of a kind or ship ya one to drop in a gun you have.
Nice build. I oddly dig the clear
This is the build o was talking about I whould love to get one like this with a 10 inch barrel and like the Walmart gun video short cause I'm saving up to get into playing with hpa one day
Cool dude, very cool.
Hello I am switching to hpa and I’m going to buy the gate pulsar but I don’t know what tank or fcu to get for it
Morning jj!
Can you show how you tune your trigger the way you like it
Of course I will make a video showing how I do it
I'm purchasing a second airsoft gun. It's a g&g cm16 mod 0. I'm going to learn to tinker on it.
I got you
@@JJMoore I'm getting it for $67 off hopup. It's a so called boneyard gun.
so many pulsars 👀
What hop up you use? And I heard with the pulsar s you had to align the nozzle, but the pulsar D you didn't have an issue with that.
Whats up bro. I was wondering if you had experienced low air pressure with your Pulsar? Trying to see what settings are decent to get me over 300 fps with 0.25 bb
I haven’t yet but if and when I do I will figure it out and let you know I’m still experimenting with them
@iiAnferny I will say I had issues with my first installation getting fps and I found the nozzle was actually too long and causing the bucking to loose seal. I shimmed the hop up forward a bit and accuracy was 100% better and fps went way up. Pull the nozzle all the way out slide your hop up over it and look down the barrel with a light see if you have a perfect seal or is the nozzle getting pushed back in. Hope that helps.
@@JJMoore Appreciate you homie!! I was wondering why everything was so quiet when I took it to the field the other day lol.
I'll check it out when I get a chance.
Oringally I snagged the wire for the fcu and had to solder it back, thinking that was the issue. 🥴
@@iiAnferny any issues I run into with them I will post to try and help the community so far everything has been on bucking and barrel end of it. other than one out the box had a wire torn off the harness ez solider and it was back in action.
Hello do you have a pics of v2 bluetooth titan for hpa , my soder joints came off i was trying to shoot and no power , i just cant find a image of where the power supply suppose ro soder to thanks @JJMoore
잘 보고 갑니다. 화이팅 합시다!
Is this better then a jack?
Ive installed it in my lancer gen 2 but my bbs curve to the right.
When i look down the barrel the nozzle is straight but its a bit high
It’s because the pulsar s needs the correct bucking to resolve the swerve just grab a G&G green and use a maxx m4p hop up and shim it correctly to meet the bucking just right and it will straighten out.
@@JJMoorewill try thank you👌💪💪
@@JJMoore would the m4A work aswell??
@@xmastersrule the m4a has a different length bore inside the answer to your question is yes but it can be harder to setup
Will this gear box drop into a g&g ssg1
Bonjour quel bloc ho up et quel setting pour le bon fonctionnement merci d'avance
just the pulsar and max trigger vs jack and max trigger which is better?
Sounds like a great video to me
Consistency and grouping?
What is the name of the small screen where you see the information?
Gate status
Thanks
Would you say this is better than the jack?
With everything the trigger board together yes I love being able to connect with Bluetooth and tune it’s really a whole package type of engine
I think I’m going to sell my jack on hop up and get one of these
how is the tachyon installed?
Engine line is 6mm right?
Would you recommend a pulsar or a f2?
It depends on what you want to do with it if you need air efficiency and precise tuning get the f2 if you want a fast gun with optical trigger response get the pulsar.👍
@@JJMoore how much more air efficient is it?
@@jadonjjj not much but definitely different
Hey JJ how much would this gearbox be? Pre built gear box with the pulsar ?
What kind of gearbox would you want just a G&G or you want a EON
@@JJMoore what is the price difference between them?
The EON is 150 and the G&G is 29$
@@JJMoore I mean with the pulsar already In ready to go
what is the gun name its sick asf🔥
Thanks it’s a ICS body they had a long time ago I found it on hop up and built my stuff inside
pulsar fit in kwa eve 9?
Is a Eon gearbox required or can I drop it in my G&g combat machine and be fine?
It’s tight in some gearboxes but G&G fits nice
Hey I put a pulsar in my cm16 and it has some alignment issues and midcap syndrome... it was a very tight fit aswell I had to dremel. Wish it would shoot straight
@@KentuckyFriedKiwi did you ever get this fixed? I just got mine and their curving idk what to do to fix it
@warren- yeah man I ended sorting the problem. I had the purple nozzle that I swapped out to the new gold nozzle. Got a eon hop up and that fixed the mid cap syndrome. Then I had to rotate my engine left or right depending on what way it was curving. At the same time I got a zci 6.02 tb inner barrel with the elvish tec patch to flap hop it and I got a omega nub.. shoots okay now
What is the body called want buy it
Ics clear m4
Can put this in an arcturus X cat?
Don’t do it the acturus cat is already perfect at is
@Dynasty_AATC mine is back at the retailer , my micro switch broke after 1 game play also got out of alignment had to drop motor to gearbox apart
Can Maxx M4A-pro hop up chamber match Gate Pulsar?
I can’t say I have only done 6 so far and all have been the maxx pro first generation
Hey man, do i need the Gate Trigger, or can i use normal Trigger s
Thx
Any trigger will work