Hi Steve's RC, Yeah The binding part was skipped but that's straight forward I had no problems binding. I am having another problem.(Please note I have the same truck and transmitter as you show in the video) The calibrating is just not working, and I am discouraged because I have been trying for 45 min, and in your video it took 2 min. When calibrating, it has steering, but no throttle, when I hold the throttle down it does not pick it up. However, when I throw it in reverse, it picks that up perfectly thinking thats throttle. So I have steering, reverse is throttle, no throttle and no brakes. I gave up trying for tonight. Please write back if you know any troubleshooting I can do.
Have you started with a clean model on your radio? Sure you don't have trims all the way centered? yea, binding is totally out of the video on accident, but I think most understand how to actually bind. Hope this helps!!
@@StevesRC Hey Steve. Thanks for responding so quick. I saw your response last night and tried it this morning. Apparently there is an extra step. Right after binding(and truck is still on) I hold the calibration button down and the light blinks green, you do the same steps, idle, throttle, brake, etc. Then turn off, and turn back on while holding the calibration/set button, do the same steps, and it worked. I noticed without doing the calibration right after binding it just would not pick anything up. I have steering, throttle and brakes, no reverse, but I don't think the baja rey has reverse? Thank you so much for helping!
I also noticed that the steering is slightly to the right for some reason, I am assuming its because of the AVC and the gyro is not level. Hope that goes away after a couple of runs.
Omg thx 🙏🏼 ❤️ I'm from Germany nice Video.
You showed how to calibrate, but skipped the binding! Did you require a bind plug or did it automatically bind in close proximity? Thanks!
@Eden Ronald yup, I've been using Instaflixxer for since november myself =)
Good video
Works for my raptor baja ray
Thanks, very helpful.
Can you please do a video on how to bind. My dad thinks that his is not working and ive never had a truck like this. please make a video on binding.
Z.z
Wlsp0w0w00appappaapapq1qaaà0,
Zll
-
Pzpz-₩₩@₩++¥0₩++¥¥+₩+₩+₩₩@₩@))@)]☆⊙\■110qo
A
A
Zpaapzxkrwdl,, 4343owrnyi5y4343owrnyi5yyyt4y%Rd.8
Hi Steve's RC, Yeah The binding part was skipped but that's straight forward I had no problems binding. I am having another problem.(Please note I have the same truck and transmitter as you show in the video) The calibrating is just not working, and I am discouraged because I have been trying for 45 min, and in your video it took 2 min. When calibrating, it has steering, but no throttle, when I hold the throttle down it does not pick it up. However, when I throw it in reverse, it picks that up perfectly thinking thats throttle. So I have steering, reverse is throttle, no throttle and no brakes. I gave up trying for tonight. Please write back if you know any troubleshooting I can do.
Have you started with a clean model on your radio? Sure you don't have trims all the way centered? yea, binding is totally out of the video on accident, but I think most understand how to actually bind. Hope this helps!!
@@StevesRC Hey Steve. Thanks for responding so quick. I saw your response last night and tried it this morning. Apparently there is an extra step. Right after binding(and truck is still on) I hold the calibration button down and the light blinks green, you do the same steps, idle, throttle, brake, etc. Then turn off, and turn back on while holding the calibration/set button, do the same steps, and it worked. I noticed without doing the calibration right after binding it just would not pick anything up. I have steering, throttle and brakes, no reverse, but I don't think the baja rey has reverse? Thank you so much for helping!
I also noticed that the steering is slightly to the right for some reason, I am assuming its because of the AVC and the gyro is not level. Hope that goes away after a couple of runs.
I'm going to put real fans back there so it can cool that motor and esc cool love losi quality 😎
Great vid!! U dont need bind plug to calibrate?
Edit* you do
Thx..I just got super rock rey awesome!!!
phillymac according to the manual you do
Damn so u gotta the roof off to bind it??
Just makes it easier in my opinion.
My receiver continues to flash orange. It doesn't go solid. I have same transmitter as you. Wtf. Where is the bind button? Is it the set button?
I failed to cover that in detail. You need to use a bind plug in the RX and perform a bind. Then right after do the calibration procedure.
@@StevesRC thanks. Use to be huge into RCS and just getting back into it. Thanks for the video!
is it the same as baja rey 1/10