ECC Auto Shop LLC out of Florida sells the entire kit including the sanden compressor and dryer . All you need is the engine bracket to mount the compressor. 575. It’s the best bang for the money. Less than half the price of this one.
@@bigmacdaddy1234 ecc has great phone support and for less half price but it’s everyone’s own decision on what kind of money they wanna spend. I know for fact the ecc 1 works fine and half price.
@@anayadavid4 it’s great and I didn’t need the defroster in my truck. The original works fine. The AC is what I needed. It was 98 today with a heat index of 112. I was out and about over a hour in it right after lunch. I couldn’t run it wide open. It was to cool and my truck isn’t air tight. It’s not awful but you can hear wind noise. I have 0 complaints 2 and 1/2 months in. I will be putting another 1 in my 4wd before next summer that’s for sure. I feel like if there was gonna be a problem I would have found it by now It’s my daily driver. I probably run 3-400 miles a week.
Thank you Rob*rt. I just got back from having my heart re-started (after checking Vintage's price$). I checked in on ECC and was pleasantly surprised. REAL prices I'm guessing that Vintage sell mainly to NASA? Anyway, thank you for the tip. I'll tell ECC to give you 10% off. Just tell em' I sent you. Cheers
Waking up and smelling the coffee. Thank you for taking the time to product this video... Yes, Vintage Air's name is well known. But a quick look at their website prices and I about had a heart attack... "Vintage AIr - Wealthy Rodders Only" apparently. And I didn't see any 12/24V "electric" compressors? Just saying. I do believe their a quality supplier. However, thumbs up for your outstanding efforts. Cheers from So.Ca.USA 3rd House On the Left (pls call before stopping by)
The bulkhead creates 4 additional connections (4 on an AC only system, 8 on an AC plus heater system) that are potential leaks. It also makes it impossible to easily dismount the inside unit if you need to move it because it will be connected to short, hard to move, hoses. That's because the bulkhead prevents the hoses from moving backwards into the engine compartment which allows some flexibility in moving the inside unit around and out of the way. I know the bulkhead setup looks "pretty" but to me seems like a waste of $75 and the creation of more problems than benefits. Aside from "pretty" it would mean if you had to replace a hose it will be a shorter piece of hose.
Yeah the bulkhead is very much optional. And you're very much right when it comes to the leaks. But in our experience, you set the unit wherever it need to be first, then make your hoses, and it never needs to move. In this application, there truly was only one location the hoses could go through the firewall anyway, so no moving it around. The main benefit other than just the aesthetic is that the bulkhead allows for tighter 90° turns than the hoses can bend, making the install on this specific truck possible.
@@hodsonmotors you make a good point in regard to the ability to do 90 bends. Mines in a 57 tbird and to do anything under the middle dash the unit needs to be dropped and swung out of the way.
Can you please put a link with the belts hoses and everything else needed for this a/c and heat steup, last guy deleted both my ac and heat is there a instruction video on this as well? and where do you control it?
That’s what I have in my 81 Alfa Romeo GTV6, replaced all the original hvac. My only issue is the low fan setting isn’t low enough! Car has a ton of glass with a lot of heat gain but stays very cold
Excellent video!! Thank you Thank you as I was looking at the vintage air gen 5 and the labor to install is crazy and the unit is up there too but this unit is just right..Thanks!
How did you handle the need for defrost (Defogging, in your case) if the heat went through the Vintage Air unit? Are you running the original Defroster in parallel?
I have the 1979-80 model and want to know what type of door lock system are you using and did you upgrade the starter for the keys to start. last question what type of upgrade did you do on the suspenseion or how did you do it. love your videos on these pick ups, very usfull.thanks
I have a Chevy Aveo 2004 with no A/C is this just like a plug and play kit ?? I have the vents in my car and the controls just don’t have the A/C on and off button
Yes! We took off the mother of pearl face, and just wrapped it in a wood grain vinyl that matched the rest of the trim. We bought a bunch of different 2x4 pieces from Amazon and just used the one that matched the best.
It's probably because every single classic is different. Different compressors, different condensers. If you've got a more mainstream classic (like a Chevy squarebody for example) you'll find all in one kits.
@@wordsspoken9327 any AC compressor will work. But in my experience, some compressors (like dodge compressors for Cummins engines) require special fittings that are hard to make work in a custom application.
Here in south Texas, A/C isn’t considered an option. It’s just too hot and humid 10 months out of the year. If you have to carry kids in car seats, it’s nothing short of cruelty. Another consideration is: you can forget about arriving at work, or church, or for a date without your clothes being soaked through and your hair plastered to your head from June through August AT LEAST.
was thinking of selling my truck and start over on ac equipped vehicle but i think this would be a better route for my favorite truck
ECC Auto Shop LLC out of Florida sells the entire kit including the sanden compressor and dryer . All you need is the engine bracket to mount the compressor. 575. It’s the best bang for the money. Less than half the price of this one.
The return policies are different (14 days vs 60 days) also Vintage Air provides phone support.
@@bigmacdaddy1234 ecc has great phone support and for less half price but it’s everyone’s own decision on what kind of money they wanna spend. I know for fact the ecc 1 works fine and half price.
How are you liking it? What’s your opinion on not having a defroster?
@@anayadavid4 it’s great and I didn’t need the defroster in my truck. The original works fine. The AC is what I needed. It was 98 today with a heat index of 112. I was out and about over a hour in it right after lunch. I couldn’t run it wide open. It was to cool and my truck isn’t air tight. It’s not awful but you can hear wind noise. I have 0 complaints 2 and 1/2 months in. I will be putting another 1 in my 4wd before next summer that’s for sure. I feel like if there was gonna be a problem I would have found it by now It’s my daily driver. I probably run 3-400 miles a week.
Thank you Rob*rt. I just got back from having my heart re-started (after checking Vintage's price$). I checked in on ECC and was pleasantly surprised. REAL prices I'm guessing that Vintage sell mainly to NASA? Anyway, thank you for the tip. I'll tell ECC to give you 10% off. Just tell em' I sent you. Cheers
This is a great video and I’m really glad you added the price list and all the on screen parts, great job
Knee knocker air. Dad bought one at Sears back in the day. They even installed it in a 1965 Ford Country Sedan.
Great video thanks ! I got 3 classes im about to get to the ac part and was super helpful
Waking up and smelling the coffee. Thank you for taking the time to product this video... Yes, Vintage Air's name is well known. But a quick look at their website prices and I about had a heart attack... "Vintage AIr - Wealthy Rodders Only" apparently. And I didn't see any 12/24V "electric" compressors? Just saying. I do believe their a quality supplier. However, thumbs up for your outstanding efforts. Cheers from So.Ca.USA 3rd House On the Left (pls call before stopping by)
Thanks for the video it was extremely helpful.
That looks like a really nice install. Good job.
I'm convinced.
The bulkhead creates 4 additional connections (4 on an AC only system, 8 on an AC plus heater system) that are potential leaks. It also makes it impossible to easily dismount the inside unit if you need to move it because it will be connected to short, hard to move, hoses. That's because the bulkhead prevents the hoses from moving backwards into the engine compartment which allows some flexibility in moving the inside unit around and out of the way. I know the bulkhead setup looks "pretty" but to me seems like a waste of $75 and the creation of more problems than benefits. Aside from "pretty" it would mean if you had to replace a hose it will be a shorter piece of hose.
Yeah the bulkhead is very much optional. And you're very much right when it comes to the leaks. But in our experience, you set the unit wherever it need to be first, then make your hoses, and it never needs to move. In this application, there truly was only one location the hoses could go through the firewall anyway, so no moving it around. The main benefit other than just the aesthetic is that the bulkhead allows for tighter 90° turns than the hoses can bend, making the install on this specific truck possible.
@@hodsonmotors you make a good point in regard to the ability to do 90 bends. Mines in a 57 tbird and to do anything under the middle dash the unit needs to be dropped and swung out of the way.
Can you please put a link with the belts hoses and everything else needed for this a/c and heat steup, last guy deleted both my ac and heat is there a instruction video on this as well? and where do you control it?
That’s what I have in my 81 Alfa Romeo GTV6, replaced all the original hvac. My only issue is the low fan setting isn’t low enough! Car has a ton of glass with a lot of heat gain but stays very cold
Excellent video!! Thank you Thank you as I was looking at the vintage air gen 5 and the labor to install is crazy and the unit is up there too but this unit is just right..Thanks!
How did you handle the need for defrost (Defogging, in your case) if the heat went through the Vintage Air unit? Are you running the original Defroster in parallel?
What a beautiful truck. Great job guys.
Wearing my Drive it Break it Fix it Shirt Now lol
I have the 1979-80 model and want to know what type of door lock system are you using and did you upgrade the starter for the keys to start. last question what type of upgrade did you do on the suspenseion or how did you do it. love your videos on these pick ups, very usfull.thanks
Gday! Did mounting the condensor reguire modification?
That Toyota truck is so beautiful
Does the heat still go through the defrost system with one of these kits or only through the 4 vents on that box?
Tape tissue paper or streamers to the vents so your viewers can see the airflow.
I actually just want to add a second AC to my car.
I don’t care if they have to install the unit into the trunk. The only thing stopping me is money.
How is the heater does it work ok, I am thinking about getting this unit great video thanks.
You could bake a thanksgiving turkey in the cab with how hot it gets!!!
😂 ok i will get that unit and cook the turkey thanks.
Will this work with an electric compressor? Not enough space to mount a belt driven compressor
The old R12 under dash units would always freeze you out back in the day.
I have a Chevy Aveo 2004 with no A/C is this just like a plug and play kit ??
I have the vents in my car and the controls just don’t have the A/C on and off button
Will it work for a 1987 22r pickup up?
Nice truck
How you crimped the a/c lines
Awesome video, thanks!
Where can I get it for 1971 buick centurion
Did you guys make the wood face? Because it looks great, I want to do that for my car so it matches the rest of the dash.
Yes! We took off the mother of pearl face, and just wrapped it in a wood grain vinyl that matched the rest of the trim. We bought a bunch of different 2x4 pieces from Amazon and just used the one that matched the best.
Please put the purchase link bro
Have you guys tried any of the 12 volt systems? I've been hearing some good things and they don't clutter up the engine bay.
What system are you talking about? I would like to add something to my truck but also keep weight to min for track days. Thanks.
@@josephneil508 look up 12 volt ac for hot rods. They keep deleting the info I was sending you...
and the handbrake, where is it?
Swapped in for an electric parking brake 👍
@@hodsonmotors which electric parking brake did you get can you send link? @hodsonmotors
Does the system control the a/c from kicking on and off
Yes
Wow thanks
Defrost controls?
No defrost on these ones unfortunately
I can’t believe you have to buy all those parts separately. I’d prefer a system with everything you need in one package.
It's probably because every single classic is different. Different compressors, different condensers. If you've got a more mainstream classic (like a Chevy squarebody for example) you'll find all in one kits.
@@hodsonmotors Is there a special compressor or is the original fine?
@@wordsspoken9327 any AC compressor will work. But in my experience, some compressors (like dodge compressors for Cummins engines) require special fittings that are hard to make work in a custom application.
Maybe it's just me, but I can't think of anything more unattractive than these under the dash aftermarket vents.
Well yeah, they're meant to be inexpensive, effect and easy to install. They're not gonna look as good as frenched in vents and a hidden box!
This one looks absolutely awesome though
Here in south Texas, A/C isn’t considered an option. It’s just too hot and humid 10 months out of the year. If you have to carry kids in car seats, it’s nothing short of cruelty. Another consideration is: you can forget about arriving at work, or church, or for a date without your clothes being soaked through and your hair plastered to your head from June through August AT LEAST.