I've been watching your videos for a while. Good info. I have a 2020 mustang GT and because of you I had the steeda progressive springs istalled. I have 275/35R20 for the front and 295/35R20 for the rear. How long does it take for the springs to settle? My front does not look at low as yours. Any ideas? Thanks.
This setup looks great I’m gonna do pretty much exactly the same on my 21 gt lowered on eibach magneride springs but I was gonna do 30 sidewalls for a bit more clearance. My only concern would be bending/cracking a rim with the crappy roads where I live do you think there would be much difference between 30 and 35 sidewalls?
Damn man! I like the look of the stock PP1 wheels on my white GT, but now you got me thinking!! I love the wider tire in the back for sure, definite traction aid, and it looks mean AF! Can't wait for the next update video after you've thrashed a bit on her. In the meantime, gonna do some OT at work and do some thinking, LOL! Me likey that set up! Cheers Dude!
I ended up ordering my Niche M227'S but i'm going square 19x9.5" with 35mm offset you think they'll clear the brembo calipers? I'm planning on 285/40/19s all the way around i'm lowering mine 1.3" all 4 corners.
Very nice brother! Love the new wheels! I recently installed 20 inch Konig Ampliforms on my GT. I did notice a tad bit more of a rougher ride after install but Im happy over all.
@@CanadianCruisin You rock! I have a new '21 GT that I really want to have a more aggressive stance without being too dramatic and tight. I'm thinking of going 275 with 19s all around and springs. I'm learning slowly and surely.
I didn't put spacers on front. I think if I went wider on the front with these wheels it would be ok. Eventually you will start rubbing the suspension if you go to thick
@@CanadianCruisin I was gong to get some 20s on my gt without lowering the car and adding spacers, but it look like when you get rims that size you really don’t need spacers…
@@rodneymims5682 it all depends on the offset. With these 20s the offset is different than the stock 19s and it males up the difference the spacers would have.
@@CanadianCruisin ahh I see…. I’m trying to find some rims with a wide appearance but not ridiculous wide ; . I have a 2021 shadow black gt premium, but it comes with the gloss black and chrome rims which I hate. I’m going to end up adding red break covers on my breaks as well. You have any recommendation on which offsets I should look at?
@@rodneymims5682 it all goes off of wheel width. The rear are 10" wide and it's a +35 offset and my fronts and 9.5" wide and it's a +45 offset. I would find some that you like and Google photos of the same kind and see what you think looks best. I find pictures or video are the easiest way to see if you'll really like the look
If you are looking for Mustang, Cobra spare parts especially vintage models I strongly recommend you Check out this Instagram page instagram.com/p/CeoBizMMJO2/?igshid=YmMyMTA2M2Y=
I need new tires. Nail in one rear and need to get 2 new ones. I have 20x9 32mm offset front and 20x10.5 45mm offset Right now I have 255/30/20 and 295/30/20. I want the same size tires as yours. Think they will rub?? I also am running steeda springs same as you. And my car is a 20 gt vert. Thanks bro. Love the videos. I'm in Canada as well. In New Brunswick.
I've been watching your videos for a while. Good info. I have a 2020 mustang GT and because of you I had the steeda progressive springs istalled. I have 275/35R20 for the front and 295/35R20 for the rear. How long does it take for the springs to settle? My front does not look at low as yours. Any ideas? Thanks.
Mine settled in about a week. I know if you have magneride it will sit a bit higher even once it's settled.
This setup looks great I’m gonna do pretty much exactly the same on my 21 gt lowered on eibach magneride springs but I was gonna do 30 sidewalls for a bit more clearance. My only concern would be bending/cracking a rim with the crappy roads where I live do you think there would be much difference between 30 and 35 sidewalls?
I wouldnt worry to much. Eibachs sit a little lower than the steeda springs on here so 35 might be to tight anyways.
Damn man! I like the look of the stock PP1 wheels on my white GT, but now you got me thinking!! I love the wider tire in the back for sure, definite traction aid, and it looks mean AF! Can't wait for the next update video after you've thrashed a bit on her. In the meantime, gonna do some OT at work and do some thinking, LOL! Me likey that set up! Cheers Dude!
Thanks. Video will be coming for sure once the rain stops
@@CanadianCruisin Looks great 👍
I got the same car but velocity blue PP1.
Did you notice a difference with cat back exhaust ?
@@billjames3030 power wise not really but it's the best sounding exhaust for the mustang in my opinion
How’s it going which Niche wheels are these? And a 315 will not fit in the mustang you think?
Niche Misano wheels. 315 can fit but im not sure what offset works best for it
I ended up ordering my Niche M227'S but i'm going square 19x9.5" with 35mm offset you think they'll clear the brembo calipers? I'm planning on 285/40/19s all the way around i'm lowering mine 1.3" all 4 corners.
My front is 35mm offset so brakes shouldn't be a problem. And My 275 tires leave room for wider sets so it should be ok I think.
Man, wheelslre looking hot. What about first driving feelings, anything noticeable ?
So far so good on the feeling. Thicker sidewall helps a lot
What was your stock size in the front?
Very nice brother! Love the new wheels! I recently installed 20 inch Konig Ampliforms on my GT. I did notice a tad bit more of a rougher ride after install but Im happy over all.
Thank you. What size tires did you go with?
@@CanadianCruisin Tire and wheel setup is 20x10 with 255/35 up front and 275/35 in the rear. Nitto
@@whiskeythrottletv8408 nice. It should look awesome
Size on front and rear again one time for us slow folks? Did you leave spacers on just front or all 4? How much does springs lower front/rear?
20x9 front 20x10 rear and no spacers anymore. Lowered 1.125 in front and 1 in the rear
@@CanadianCruisin You rock! I have a new '21 GT that I really want to have a more aggressive stance without being too dramatic and tight. I'm thinking of going 275 with 19s all around and springs. I'm learning slowly and surely.
@@My-tk1oj it should look awesome.
You think you could’ve fit 295s front instead of using spacers?
I didn't put spacers on front. I think if I went wider on the front with these wheels it would be ok. Eventually you will start rubbing the suspension if you go to thick
What type of lowering springs do you have and where did you get them from
Steeda progressive springs from cjponyparts
Did you take your spacers off?
Yes they're off
@@CanadianCruisin I was gong to get some 20s on my gt without lowering the car and adding spacers, but it look like when you get rims that size you really don’t need spacers…
@@rodneymims5682 it all depends on the offset. With these 20s the offset is different than the stock 19s and it males up the difference the spacers would have.
@@CanadianCruisin ahh I see…. I’m trying to find some rims with a wide appearance but not ridiculous wide ; . I have a 2021 shadow black gt premium, but it comes with the gloss black and chrome rims which I hate. I’m going to end up adding red break covers on my breaks as well. You have any recommendation on which offsets I should look at?
@@rodneymims5682 it all goes off of wheel width. The rear are 10" wide and it's a +35 offset and my fronts and 9.5" wide and it's a +45 offset. I would find some that you like and Google photos of the same kind and see what you think looks best. I find pictures or video are the easiest way to see if you'll really like the look
Does putting a 275 on a 20 inch rim without spacers rub any on hard turns?
No rubbing on my car. Spacer would only be needed if the offset is wrong
If you are looking for Mustang, Cobra spare parts especially vintage models I strongly recommend you Check out this Instagram page instagram.com/p/CeoBizMMJO2/?igshid=YmMyMTA2M2Y=
Whts the off set off the wheels ?
I need new tires. Nail in one rear and need to get 2 new ones.
I have 20x9 32mm offset front and 20x10.5 45mm offset
Right now I have 255/30/20 and 295/30/20. I want the same size tires as yours. Think they will rub??
I also am running steeda springs same as you. And my car is a 20 gt vert.
Thanks bro. Love the videos. I'm in Canada as well. In New Brunswick.
That is a tight fit but look good man with your black mustang 👍
Thank you. I'm happy with how they fit
They look great,Nice choice.
Thanks 💪
How much did it cost you in total?
About 3500 after everything
@@CanadianCruisin cad ? And I can see those tires from the space lol sick and sexy car - bossy and angry
@Aj Ah Canadian yeah. That's shipping tax and install for rims and tires all included
Tight fit for sure
Everyone likes a tight fit 😂
@@CanadianCruisin 🤣
No more wheel spacers?
Not with these rims no
Anyone know if 275/35R20 in the front will have more room on stock suspension for 2022 Mustang GT Base Model? Don't want to rub.
You’ll be good… perfect set up…
First! Yessssss!
💪💪
Big brakes next?!
One day maybe
What is the offset of your rims
Front at 20x9 with a +35 and rear is 20×10 with a +40
Thanks
Those look sharp on there !
I'm happy with them 😁
Any car show today ?
I'm not sure of any going on today
What are these rims called?
Niche Misano. 20 inch
If you will be selling the spacers let me know I’m local to you.
I'll probably keep them for the winter tires but I'll let you know
@@CanadianCruisin cheers
In what world is that garage wide enough. Is the world not big enough for 2 more feet of garage width!
And our townhouse is considered a "full size" garage believe it or not 😂