Did a Chimera intake and cat delete pipe, very helpful. Second spark plug burns what’s left for exhaust. Does not have variable valve timing or anything at all like that. But you can get a better cam. Just haven’t installed mine yet. Headlight sucks and so do the tires
Really sorry, but the mic scrapping made it hard to watch, but I give you an A+ for effort. I'll still like this video, you seem like a nice dude! We all gotta learn somewhere!
Definitely not a "clone". This is its own thing, a direct competitor to the Grom and Z125, etc. Enjoyed the vid! Looks like a perfect zip around bike for here in Hawaii.
Chinese products aren’t inherently bad. We get shitty Chinese products because we’re cheap and those are the ones we order. They are very capable of making and also do make top of the line everything.
Here in CO a powersports shop got 2 in stock last week as a "test". Sold them in 2 days. They're going to order more bikes in. I sat on one that was just sold but I bottomed out that rear suspension. Also the stock controls were twisted up and definitely needed adjustment.
Hey, I just bought a 2022 TNT 135 and the 1st thing I did was remove that ugly azz rear half fender/license plate holder and light, 2nd thing mounted light and plate under seat. Tires are not good . I will be adding some aftermarket stuff in the future. Just started back riding after 20yrs. so, I thought a small bike to get re acquainted would be safe but, after almost a month I'm ready for more power . Nice commentary.
ThatCrazedGunner nothin so far I changed the oil at 300 600 and 1000 cause I think I saw one of your videos showed a lot of metal shavings but mine didn’t have any . I went down a tooth in the in the front cause i live in the mountains
Can you check your air box for condensation in the bottom left front corner. Just opened mine up and there was some liquid down in there, smelt like gas but doesn’t burn on the paper towel I used to suck it up . I ride in the rain a lot so it might be that but I wanna know what you find
I’ll definitely make a video on both mine and my dad’s tnt 135 and see if I find anything. I believe his actual has a little bit of like this oil stuff, but mine is dry. I’ll make a video to show people thou!
I’m going to also do a big service on this bike now that it has 1500 miles greasing the wheels bearings adjusting the chain adjusting the valves and much more. I haven’t seen any videos about doing this stuff :)
Crappy static noise coming from your phone camera every time you move made me stop the video, leave a negative feedback, write this comment and get the heck outta here! Really annoying! Plus, you simply repeated everything you said in your earlier video on this bike. Redundant!
It’s so hard to watch this video. The audio is bad but also your lack of knowledge is just horrible. Don’t do a review if you do t know what you are talking about.
I'm thinking about picking one of these up off FB market. How much did you pay new? I know Major Powersports sells them here in LV. I'm not sure how much to offer used due to the iffy resale on Chinese bikes.
Everet York I payed $2800 out the door with taxes and title. I haven’t seen a used on for sell but I’m sure the resell value isn’t bad. You should be able to pick on up for $2200 maybe even $1900
I have a little over 1200 miles on my 135cc bought it in June at chaparral Motorsports in san Bernardino. I love the bike.. I'm not gonna lie a barely did my first oil change at 1150 miles. As if today it's randomly stalling at the light ? Could it be because I need to adjust the valves?.. P.s I f**king love this bike. I have a r1 and 2018 636 and this is just as fun or even better lol.
rashaad tate it’s a possibility that the valves just need adjusting, or maybe just bad gas. May fathers tnt 135 had the same thing after one tank of gas and fresh 91 with a booster in it and it’s runs great!!! That’s awesome that you love you’re bike man!!! Keep me updated on anything that goes wrong with it or if something happens!!!
@@ThatCrazedGunnerM9130 bro I think you are 100% right I haven't had any issues since I got rid of the gas in the tank.. I will start posting more videos as well we need to build this benelli 135cc community 1 rider st a time.. Does your bike squeak alot? Mainly back breaks ..I think... I di try to pop wheelies alot so I think that may have something to do with that.
My bike doesn’t squeak But my fathers rear pads touch the rotor a little and his squeaks when he’s coming off a hard stop. That’s great that keep me up to date on any other problems! And if you make a video share it to my channel so I can watch it! 😎 I love seeing the tnt’s on camera
ThatCrazedGunner honestly bro there may just be grease on the rotor. Best thing I’d say is get new pads and clean the shit out of the rear rotor. Cars will do the same thing if you don’t get shipping grease off new rotors.
rashaad tate wow no kidding it’s just as fun or even better than you’re regular bike. I ordered the Tao Tao hellcat 125 and I can’t wait to get it man. 1140 shipped to my door can’t beat it. I’m not afraid to work on something so can’t wait. I fix cars and other stuff so I’m not worried. I might 190cc swap it as well later down the road.
Cool...I have a white tnt 135 as well...1700 miles...bought July 11th 2019...LOVE my Benelli!!! By the way...don’t know if u know already...but they have a big MiniMoto ride planned in Vegas Oct 25-27th...lord willing...I’ll be riding in it...at least 2 Benelli’s rolling would be cool...
Lexie Cassel if you did t want to do any mod the benelli would be my first choice, it’s faster bigger and a lot more comfortable, & it’s a 5 speed compared to a 4 speed
Meh..I bought a used 2009 Kawasaki Eliminator 125 for $900 back in 2014. The bike was in mint condition, and had around 1,100 miles on it. I rode it for two years and put another 20,000 miles on it before I sold it. That bike actually looked like a full size motorcycle. It was rare, so almost everybody who saw it thought it was an 800cc or bigger. I'm tempted to get the TNT, but with the miles I put on, a Honda Grom would probably be a safer bet. Definitely a cool looking bike though.
Shaun Daskam that’d a lot of miles! To be safe get a Honda! Lol that’s a lot of miles and even thou I have 1900 now on mine and I ride it like a as hole that’d still a lot of miles on a china bike lol
@@ThatCrazedGunnerM9130 Indeed it is! I used that bike as a primary source of transportation, as well as leisure riding. In the spring and summer time, I would ride seven days a week. the bike was just stupid heavy at just under 300lbs, and it was slow as hell. But, it was a blast to ride. I feel these little bikes give that same feeling.
Single cylinder! And you’re not the only one in (America) now do you mean continents? Then I guarantee from Argentina to Alaska and Canada you’re not the only one with it, many US reviewers on UA-cam
baldy meek I haven’t had it on my bike, but my father has it on his and it only has 340 miles on it. Mine has over 3800 miles now and still runs like the day I got it.
@@ThatCrazedGunnerM9130 I'm trying to find a bosh injector that would replace the one in mine o think there sticking when it's cold had to replace 02 sensor around 800 mile on mines not a bad bike could doo with the wire loom tidying up and replacing sensors with well known makes tho
Noooo, it does not have two cylinders and it is not a VVTI system, stop talking about things you have no idea about. It is a good bike but not that great.. It runs much better on low octane gas. The handelling on this bike is great, and it looks much better with the fender.
Bro, no there is way more. I would of kept that out of my video. Made you seem arrogant a tad. Maybe if you look at other loaded VIDEO'S your next one won't suck as bad.
if you want a nice mini to modify and have fun with, then you should get a Lifan Kp mini. it is a carb, but it's 150cc with the ability to really beef it up.
Hey man I got a 2020 benelli I got from South Carolina and I’m from Texas it has 4800 miles on it and still running strong
This thing looks like a miniature MV Agusta! This is the coolest minibike I have ever seen. Now I want one! Nice bike!
Did a Chimera intake and cat delete pipe, very helpful. Second spark plug burns what’s left for exhaust. Does not have variable valve timing or anything at all like that. But you can get a better cam. Just haven’t installed mine yet. Headlight sucks and so do the tires
It's not a beginner bike, it's a fun bike!
Two cylinders? No, It is a single.
Michael Paul I probably meant 2 spark plugs on a single cylinder engine
@@ThatCrazedGunnerM9130 that is what I thought you might mean.
It's not a clone! Clone means it's a direct copy and there is nothing on the TNT that is the same as the Grom except the tire size.
MrKdr500 I’ve seen someone put a Grom Sf Mid Fairing Set on a Benelli
@Cutta_Campaign with modifications. I've seen a ford body on a chevy frame does that mean one is a clone of the other no
Really sorry, but the mic scrapping made it hard to watch, but I give you an A+ for effort. I'll still like this video, you seem like a nice dude! We all gotta learn somewhere!
Have you had any problems with the fuel pump
Im in las vegas also and have a tnt135..you still own it...
Definitely not a "clone". This is its own thing, a direct competitor to the Grom and Z125, etc. Enjoyed the vid! Looks like a perfect zip around bike for here in Hawaii.
Chinese products aren’t inherently bad. We get shitty Chinese products because we’re cheap and those are the ones we order. They are very capable of making and also do make top of the line everything.
Do you have a link for the lic plate holder?
Here in CO a powersports shop got 2 in stock last week as a "test". Sold them in 2 days. They're going to order more bikes in. I sat on one that was just sold but I bottomed out that rear suspension. Also the stock controls were twisted up and definitely needed adjustment.
Brian Olsen the rear shock is super easy to adjust, and the controls can be adjusted as well. Only would take an hour at max to do everything.
Hey, I just bought a 2022 TNT 135 and the 1st thing I did was remove that ugly azz rear half fender/license plate holder and light, 2nd thing mounted light and plate under seat. Tires are not good . I will be adding some aftermarket stuff in the future. Just started back riding after 20yrs. so, I thought a small bike to get re acquainted would be safe but, after almost a month I'm ready for more power . Nice commentary.
No, this bike does not have two cylinder, it just has 2 spark plugs. It is a good bike but it has terrible headlights.
Are the benelli tnt135 there in the states is also assmbled in china?
I got mine in May and just hit 2000. It’s my daily driver though
Timmy Draptston have you had any problems with yet?
ThatCrazedGunner nothin so far I changed the oil at 300 600 and 1000 cause I think I saw one of your videos showed a lot of metal shavings but mine didn’t have any . I went down a tooth in the in the front cause i live in the mountains
Can you check your air box for condensation in the bottom left front corner. Just opened mine up and there was some liquid down in there, smelt like gas but doesn’t burn on the paper towel I used to suck it up . I ride in the rain a lot so it might be that but I wanna know what you find
I’ll definitely make a video on both mine and my dad’s tnt 135 and see if I find anything. I believe his actual has a little bit of like this oil stuff, but mine is dry. I’ll make a video to show people thou!
I’m going to also do a big service on this bike now that it has 1500 miles greasing the wheels bearings adjusting the chain adjusting the valves and much more. I haven’t seen any videos about doing this stuff :)
Crappy static noise coming from your phone camera every time you move made me stop the video, leave a negative feedback, write this comment and get the heck outta here! Really annoying! Plus, you simply repeated everything you said in your earlier video on this bike. Redundant!
Stop the negativity bro
Where did you get you phone holder?
It’s so hard to watch this video. The audio is bad but also your lack of knowledge is just horrible. Don’t do a review if you do t know what you are talking about.
🤣😂🤣😂🤣😂🤣😭😭😭😭
I loved the video, thanks a lot. Keep up the good work
Why would you change the oil after 500 miles? 🤦♂️
Why would you call it a clone of the grom when there is nothing similar to it. In fact it is better than the groom as you have described it.
Hardly a "clone". Does that mean the Z125 is a clone too?
Any handlebar buzz or oil burning?
I'm thinking about picking one of these up off FB market. How much did you pay new? I know Major Powersports sells them here in LV. I'm not sure how much to offer used due to the iffy resale on Chinese bikes.
Everet York I payed $2800 out the door with taxes and title. I haven’t seen a used on for sell but I’m sure the resell value isn’t bad. You should be able to pick on up for $2200 maybe even $1900
I have a little over 1200 miles on my 135cc bought it in June at chaparral Motorsports in san Bernardino.
I love the bike..
I'm not gonna lie a barely did my first oil change at 1150 miles.
As if today it's randomly stalling at the light ? Could it be because I need to adjust the valves?..
P.s I f**king love this bike.
I have a r1 and 2018 636 and this is just as fun or even better lol.
rashaad tate it’s a possibility that the valves just need adjusting, or maybe just bad gas. May fathers tnt 135 had the same thing after one tank of gas and fresh 91 with a booster in it and it’s runs great!!! That’s awesome that you love you’re bike man!!! Keep me updated on anything that goes wrong with it or if something happens!!!
@@ThatCrazedGunnerM9130 bro I think you are 100% right I haven't had any issues since I got rid of the gas in the tank..
I will start posting more videos as well we need to build this benelli 135cc community 1 rider st a time..
Does your bike squeak alot? Mainly back breaks ..I think...
I di try to pop wheelies alot so I think that may have something to do with that.
My bike doesn’t squeak But my fathers rear pads touch the rotor a little and his squeaks when he’s coming off a hard stop. That’s great that keep me up to date on any other problems! And if you make a video share it to my channel so I can watch it! 😎 I love seeing the tnt’s on camera
ThatCrazedGunner honestly bro there may just be grease on the rotor. Best thing I’d say is get new pads and clean the shit out of the rear rotor. Cars will do the same thing if you don’t get shipping grease off new rotors.
rashaad tate wow no kidding it’s just as fun or even better than you’re regular bike. I ordered the Tao Tao hellcat 125 and I can’t wait to get it man. 1140 shipped to my door can’t beat it. I’m not afraid to work on something so can’t wait. I fix cars and other stuff so I’m not worried. I might 190cc swap it as well later down the road.
Cool...I have a white tnt 135 as well...1700 miles...bought July 11th 2019...LOVE my Benelli!!! By the way...don’t know if u know already...but they have a big MiniMoto ride planned in Vegas Oct 25-27th...lord willing...I’ll be riding in it...at least 2 Benelli’s rolling would be cool...
ItsMrEverything do you have a Instagram name so we can be in touch for Oct 25-27
Yeah @ItsMrEverything on all social media...
Holy shit the welds on that pipe… somebody needs a grinder
In tank?
what kind of card holder is that you have
?
The Infinit Ryda some cheep one I found at Walmart! Lol
Matthew Cherington just bought one, but you were definitely first.
Ofcourse. It's italian guided and supervised. It should be built like a tank
I’m sorry, how many miles do you have?
Bike looks great, but oof.... Those welds on the exhaust...
Dirty Harry the welds are from me and some first trying to hollow out the little CAT it had lmafo 😂😂😂😂😂😂😂
Definitely need a new pipe!
@@ThatCrazedGunnerM9130 definitely the reason why there’s “soot”
Here in Australia the grom and the tnt135 are the exact same price they are both $3999
Lexie Cassel wow that’s crazy!
ThatCrazedGunner what would you get if they were the exact same price and didn’t really want to do any mods
Lexie Cassel if you did t want to do any mod the benelli would be my first choice, it’s faster bigger and a lot more comfortable, & it’s a 5 speed compared to a 4 speed
In the usa the benelli is 3/4 the cost but they are not anywhere near as available.
Lexie Cassel that sucks here in the US groms are 4600. Dollars out the door and these are 2499.00
Are these 7/8 handlebars? What bars can I run
What’s it’s top speed
ive put over 350 miles on my 2020 in less than a month. i love this bike.
John Linton how is the mpg? I need this info to plan a trip plz
@@alexcpeng 87mpg in town. 60mpg on the interstate at 70mph. Rode it from Missouri to Indiana and back.
@@Turk3y89 Thanks a lot
Wow, any breaks between? I was wondering how many miles this thing can go!
I just got one my self 2021 green and black
caleb rohrbach great color choices and bike choice
ThatCrazedGunner thank you I love it so far it’s rides great
single cylinder1 4 valve... 2 spark plugs!
Great video man. Awesome bike
Am buy on. This. Tuesday. I. Can. Wait.
How much did you pay for it?
$2800 tax and title out the door
This thing looks like a mini to my benelli 302s
Any one know him? I don’t wanna hear “I had know idea” from mom on the news.
I love mine already!!!
Meh..I bought a used 2009 Kawasaki Eliminator 125 for $900 back in 2014. The bike was in mint condition, and had around 1,100 miles on it. I rode it for two years and put another 20,000 miles on it before I sold it. That bike actually looked like a full size motorcycle. It was rare, so almost everybody who saw it thought it was an 800cc or bigger. I'm tempted to get the TNT, but with the miles I put on, a Honda Grom would probably be a safer bet. Definitely a cool looking bike though.
Shaun Daskam that’d a lot of miles! To be safe get a Honda! Lol that’s a lot of miles and even thou I have 1900 now on mine and I ride it like a as hole that’d still a lot of miles on a china bike lol
@@ThatCrazedGunnerM9130 Indeed it is! I used that bike as a primary source of transportation, as well as leisure riding. In the spring and summer time, I would ride seven days a week. the bike was just stupid heavy at just under 300lbs, and it was slow as hell. But, it was a blast to ride. I feel these little bikes give that same feeling.
Single cylinder! And you’re not the only one in (America) now do you mean continents? Then I guarantee from Argentina to Alaska and Canada you’re not the only one with it, many US reviewers on UA-cam
Yuri Travels at the time yes I was one of just a hand full, but now I have friends that own one. Great bike still driving it
@@ThatCrazedGunnerM9130 I see, ok man nice video, by the way I found this ua-cam.com/video/3oL5JZ_WtJY/v-deo.html
Did you notice how bad the headlight is ? I finally found a solution.
wait till you get the cold stall issue
baldy meek I haven’t had it on my bike, but my father has it on his and it only has 340 miles on it. Mine has over 3800 miles now and still runs like the day I got it.
@@ThatCrazedGunnerM9130 I'm trying to find a bosh injector that would replace the one in mine o think there sticking when it's cold had to replace 02 sensor around 800 mile on mines not a bad bike could doo with the wire loom tidying up and replacing sensors with well known makes tho
Spit it out already DAMNNNNNN
How many miles?
daniel farmer I have 1800 now
Noooo, it does not have two cylinders and it is not a VVTI system, stop talking about things you have no idea about. It is a good bike but not that great.. It runs much better on low octane gas. The handelling on this bike is great, and it looks much better with the fender.
Also 1300 miles in 4 months is nothing.
pretty sure the groms are also built in China.
Steve Thorne honestly it probably is.
Taiwan specifically
Thailand
9:47 voice of ghost
just listen
Its an Italian brand
The audio hurt my soul
1300 milles in 4 months ? That's nothing.
Why don't you try riding that thing, before you report it's success.
your audio agh
NachoLePew get me a new mic and it will sound better ❤️ lol
Bro, no there is way more. I would of kept that out of my video. Made you seem arrogant a tad. Maybe if you look at other loaded VIDEO'S your next one won't suck as bad.
if you want a nice mini to modify and have fun with, then you should get a Lifan Kp mini. it is a carb, but it's 150cc with the ability to really beef it up.
2 cylinders,,,,oooo you dont have a clue,,,,
Gay