User Wish Flexible Tube Catia v5 Training - Laws - Law Curve - Sweep

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 46

  • @VulcanJEDI
    @VulcanJEDI 3 роки тому

    How do I get a parametric cable with a set length and a bend radius limit?

  • @vidalwei
    @vidalwei Рік тому

    How can I display "Parameters"? My version doesn't show it

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  Рік тому

      Please watch my catia v5 shorts - ua-cam.com/users/shortsHLXHSwy9xbk

    • @vidalwei
      @vidalwei Рік тому

      @@wolfgang.walden.cad.training Thank you very much, do you have a "short" where it shows How to change your reference system?

  • @bram4829
    @bram4829 3 роки тому

    Is it possible to have some geometry-properties as a parameter? I am trying to generate a curve depending on the local curvature of another curve. So what i tried is to set up a law with a curvature-measurement as input, but i did not get it to work. Thank you

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  3 роки тому

      You can use a sketch as parameter, just take a look at the parameterlist if you create a parameter.

  • @tensevo
    @tensevo 6 років тому

    Great insights. Do you know how to create a car suspension and steering in a single CATIA part body (CATPart) using knowledge, parameters, laws, formulas etc. rather than create a kinematics workbench? Any ideas would be appreciated.

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      Sorry, I´m just a trainer - not an engineer. You would do that in an assembly, to do it in one part would be sort of useless.

  • @oum135
    @oum135 3 роки тому

    How can we do if we don't have law function in sweep

  • @harishwarreddy6244
    @harishwarreddy6244 6 років тому +1

    sir can you tell this in siemens nx 11?? please thanks in advance

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      There is already a video : ua-cam.com/video/61n9nmlbouM/v-deo.html - you should be able to use the search in my channel, shouldn´t you?

  • @dionecorpa2149
    @dionecorpa2149 6 років тому +1

    The best teacher, I'm learning more about this tool.

  • @shayanroohbakhsh9321
    @shayanroohbakhsh9321 8 років тому

    hi. what is diff between a low created by fog and a low created in formula windows (using add formula)???

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  8 років тому

      +shayan roohbakhsh Simple - created with FOG it is a law - created with formula it is a formula.

    • @shayanroohbakhsh9321
      @shayanroohbakhsh9321 8 років тому

      +Wolfgang Walden so if i want to draw a helix that it's pitch increases 1 mm in each revolution . i have to use low or formula?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  8 років тому +1

      +shayan roohbakhsh If you creat a helix - there is button at the right side of the pitch value : LAW - so I would assume you need a law.

  • @S8412-P
    @S8412-P 4 роки тому

    I can't draw a bellow drawing can you please help ?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  4 роки тому

      Sorry, what would be a "bellow"?

    • @S8412-P
      @S8412-P 4 роки тому

      @@wolfgang.walden.cad.training bellow its like a hand air blower ,
      Earlier days it was used for firing a forge

    • @S8412-P
      @S8412-P 4 роки тому

      @@wolfgang.walden.cad.training i can share the drawing can you please give me your mail ID , you can understand my problem much better then

  • @MarcusViniciusMO
    @MarcusViniciusMO 6 років тому

    Sir, how can I put the parallel curve in a sketch to extrude it?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      Hi, what do you want to achieve? A parallel curve to extrude?

    • @MarcusViniciusMO
      @MarcusViniciusMO 6 років тому

      +Wolfgang Walden Hi, sir. I want to do a solid which one face has a sinus profile.

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      Ok, I see. So create the sinus profile the same way as i did in my video. Then make a new sketch and project that curve into your sketch.

    • @MarcusViniciusMO
      @MarcusViniciusMO 6 років тому

      +Wolfgang Walden is there a specific function to project the curve into a sketch?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      LOL - this function is available in almost every CAD-program. It is in the sketcher, you can project edges etc. in your sketch plane.

  • @harishwarreddy6244
    @harishwarreddy6244 6 років тому

    Respected sir , i was talking about this video , how can we do in Siemens nx ?? I am sorry if I disturbed you.

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  6 років тому

      I´ve done this exercise in NX - your first comment was below that NX video. That is the way to do it in NX.

  • @hrushikeshparicharak3721
    @hrushikeshparicharak3721 6 років тому

    Sir how you decided the law

  • @SaddamHussain-jp6wz
    @SaddamHussain-jp6wz 6 років тому

    sir, can you please make a vedio explaining in detail about the sweep surface definition , its profile type and use of optional element .. that will be really helpful for concept clarification
    thankyou in advance

  • @constructioncentral464
    @constructioncentral464 7 років тому

    Your channel is very good Wolfgang. Just subbed!

  • @DeadlyPoet1
    @DeadlyPoet1 7 років тому

    Great tutorial!

  • @querrythis
    @querrythis 8 років тому

    Thank you very much. Well done video tutorial. I learnt something new.