If I am wrong please correct me. I guess the the command {\thepage\} used by you like I mentioned is wrong. The command should be {\thepage}. An extra back slash was used.
Whenever I try to add width it displays error 'package not found', how do I know which package is missing and how can I add that package? PLEASE help me out..
hi sir, how are you? need some help. my book size is 8 1/4 x 11 inches and work size is 7 1/4 x 10. but page numbers are too space from the last line of all pages, now i want to adjust or short space gap between last line and page numbers. Please let me know . Thak you
Hi, I'm using TexShop and I downloaded only the BasicTex package. I couldn't figure out how to install the packages. Could you share a tutorial demonstrating how to install package?
Hi there, I just used the same code in Overleaf, but it doesn't work.. mainly I become errors with the following line: \usepackage[margin=1in, left=1.5in, includefoot]{geometry} . Could You plz give some alternative code for this line? thx beforehand.
Thank You Sir. These videos helping me lot for my thesis. and I have a doubt that, how to give chapter name like Chapter 1 Introduction(it should not get number in main page but it should in contents)
If i use a command like \usepackage[latin1]{inputenc} or \usepackage[applemac]{inputenc} your command \textsc and others, won't work. I would like to know if and how it's possible with those packages still use your commands.
I am using texmaker. and i am having problem in table of contens page numbering. while i give the command \thispagestyle{empty} it only deletes page number of one page of table of contents. but i have two pages of table of contents. i want to delete page numbers on both pages. help please.
Thank you for sharing your knowledge!! I saw all the videos and immediately was able to start my thesis document! Amazing!! I would like to ask you about a problem I'm having with one of my chapters. It starts on the right page of the book (page 3 and I know this because it does not contain the heading) but then all the sections are on the next page, on page 4, and the margins are not respected. The this is that if I take out the last four sections everything goes back to normal, chapter starts on page 3 and margins are ok. Do you have any idea why this may be happening? I have 9 chapters total and this only happens to one of them! Thanks again for the tutorials!!
Hi, Your tutorials are very useful and entertaining, thanks for sharing knowledge and time~! A quick not-so-related question: What software did you use to create your videos? I am trying to make some educational videos myself (phys/chem stuff) and I think using a tool like yours will be useful. Thanks a lot~
This was shot on my mac running OS X. So the tools I used were: QuickTime to do the screen capture and voice capture, and Final Cut Pro X to edit the video.
Hi, thanks for this nice tutorial. I have a problem with my header as it overlaps with the page number using the following preambles. Would you please help me to get rid of this overlapping? \usepackage{fancyhdr} \fancyhead{} \pagestyle{fancy} \fancyfoot{} \usepackage[para]{bigfoot} \DeclareNewFootnote[para]{default} \usepackage[T1]{fontenc} \fancyhead[LE, RO]{\thepage} \fancyhead[RE]{\it{ ouppercase{\leftmark}}} \fancyhead[LO]{\it{ ouppercase{ ightmark}}} Thanks in advance, Ahmed
Thanks alot for the series. Really helped me a lot in preparing my docs. Thanks again.
If I am wrong please correct me. I guess the the command {\thepage\} used by you like I mentioned is wrong. The command should be {\thepage}. An extra back slash was used.
yep great work dude.
I was eyeballing to find out why it didn't work on my Mac, thank you so much hahaha
Yeah, I think he mistyped.
@Aathil Ahamed Thanks, this worked !
At minute 6:55, shouldn't be {\thepage} ? If I put the final backslash It gives me an error
you have to put the spaces after "{" and before "}". Just like in the video { \thepage\ }
Thank You . Your Content is Very Much Helpful
Whenever I try to add width it displays error 'package not found', how do I know which package is missing and how can I add that package? PLEASE help me out..
how to add left side margin, right side margin in report format in latex?. I want to left margin as 2.5cm , right side margin as 2cm
These are very helpful videos! Thank you for sharing!
thank man....is it right de conmand \thepage\ ???
hi sir, how are you? need some help. my book size is 8 1/4 x 11 inches and work size is 7 1/4 x 10. but page numbers are
too space from the last line of all pages, now i want to adjust or short space gap between last line and page numbers. Please let me know . Thak you
Thankyou for your tutorials. Can you please do a tutorial on how to do fancy sections/chapters please? Thanks
Hi, I'm using TexShop and I downloaded only the BasicTex package. I couldn't figure out how to install the packages. Could you share a tutorial demonstrating how to install package?
Which app do you use for LaTeX?
It looks quite different then mine... Please answer
Thanks, dude. Helped me out a fair bit. Much appreciated. :)
i love you so much for this tutorial.. thanks a lot. liked, subbed, shared:)
Hi there,
I just used the same code in Overleaf, but it doesn't work.. mainly I become errors with the following line: \usepackage[margin=1in, left=1.5in, includefoot]{geometry} . Could You plz give some alternative code for this line?
thx beforehand.
I have the same error too
I have the same error in Overleaf, did you solve it ?
Thank you for the videos, you exaplain very well they hepled me a lot!
I'm glad I could help! Happy learning :)
It gave error when I use " \usepackage{fancyhdr}
\pagestyle{fancy}"
could you help me please to fixed that
+RaheemTalib Badr Install the 'Fancyhdr' package, that'll help I guess
@@nasimulogical I have this problem in Overleaf in wich you can't install packages
Excellent tutorial !!
Osm sir , ❤️
Thank You Sir. These videos helping me lot for my thesis. and I have a doubt that, how to give chapter name like
Chapter 1
Introduction(it should not get number in main page but it should in contents)
If i use a command like \usepackage[latin1]{inputenc} or \usepackage[applemac]{inputenc} your command \textsc and others, won't work. I would like to know if and how it's possible with those packages still use your commands.
I am using texmaker. and i am having problem in table of contens page numbering. while i give the command \thispagestyle{empty} it only deletes page number of one page of table of contents. but i have two pages of table of contents. i want to delete page numbers on both pages. help please.
Thank you for sharing your knowledge!! I saw all the videos and immediately was able to start my thesis document! Amazing!!
I would like to ask you about a problem I'm having with one of my chapters. It starts on the right page of the book (page 3 and I know this because it does not contain the heading) but then all the sections are on the next page, on page 4, and the margins are not respected. The this is that if I take out the last four sections everything goes back to normal, chapter starts on page 3 and margins are ok. Do you have any idea why this may be happening? I have 9 chapters total and this only happens to one of them!
Thanks again for the tutorials!!
great tutorial
Hi,
Your tutorials are very useful and entertaining, thanks for sharing knowledge and time~!
A quick not-so-related question: What software did you use to create your videos? I am trying to make some educational videos myself (phys/chem stuff) and I think using a tool like yours will be useful.
Thanks a lot~
This was shot on my mac running OS X. So the tools I used were: QuickTime to do the screen capture and voice capture, and Final Cut Pro X to edit the video.
thanks alex.continue making tutorial.
I'm glad you enjoy my tutorials. More will be coming in the future on other projects I work on. Cheers!
Awesome....thanks! :) Very helpful
Thanks... itz been reallyy helpful....
Hi, thanks for this nice tutorial. I have a problem with my header as it overlaps with the page number using the following preambles. Would you please help me to get rid of this overlapping?
\usepackage{fancyhdr}
\fancyhead{}
\pagestyle{fancy}
\fancyfoot{}
\usepackage[para]{bigfoot}
\DeclareNewFootnote[para]{default}
\usepackage[T1]{fontenc}
\fancyhead[LE, RO]{\thepage}
\fancyhead[RE]{\it{
ouppercase{\leftmark}}}
\fancyhead[LO]{\it{
ouppercase{
ightmark}}}
Thanks in advance,
Ahmed
how can I download this program? what name of it? please!!!
TexStudio, available for a free download
how to intend a line in a paragraph??? plz help
If you mean 'how do you indent the first line of a paragraph,' just watch the video. It is covered at 2:00. Did you watch the video ... ?
how do i create something like this:
1 Intro
1.1 Definition
1.1.1 Whatever
Thats report I think
Just like \section{}, there are also \subsection{} and \subsubsection{}.
Is there any deeper?
Thank you!
I'm glad I could help!
great tnx
I am Addisalem it nice too me