Absolutely love VaultX binders! They are such high quality and really feel great to hold and flip through. Have some of my master sets stored in these!
Is absolutely love VaultX, the perfect fit sleeves are what I use all the time. I also really like the 12 pocket binders instead of 9, so much better to display cards! I really like my magnetic cases as well!
One note on the one touches, I have been using the Ultra Pro 35pt ones and they perfectly fit a Pokemon card that has a perfect fit sleeve on it. 12$ for 5 on Amazon. Also if you use your fingers to expand the semi rigids before you insert the card they will slide in much easier and reduce the risk of gumming up the bottom edge of the card
I sleeve my board game cards and I can also vouch for that exact Japanese brand of perfect fit sleeves. They're not only affordable but they're actually perfect. I love them so much. Ended up getting the VaultX binder with your code. It looks so good and it side loads AND it has a dark blue option? Sold. I almost went for the 12-per-page version but it's probably too excessive for now. If I get back into collecting heavily I might get one. For now I'm just getting some Pokemon cards for nostalgia. (Got a couple Etsy mystery bundles and picked up the Japanese 151 booster from Wal*Mart for basically half-off.)
Ever since I started watching you I started sleeving my cards like that! If you haven’t already, you should do a video of your collection! Looks so dope.
I personally don’t use them. Some people say they are cheap and rip easily, but haven’t necessarily noticed that. What I don’t like about them is that they have a matte finish on them so it mutes the holofoil on your cards.
Do you have any experience with Ultra Pro Vivid binders? They're the binders I use. I've never used VaultX but from everything I can tell they're pretty much equal.
I do want to add that if you don't have a big budget that this isn't completely needed. I have my pokemon cards from when i was a kid (2003- ish) and i put them in a binder back then. No sleeves, binder doesn't have a zipper. The cards still look great, altough they were always stored in a very dry room with a simmilar climate. So unless you pull some stuff you want to make a profit on later, i'd say buy some cheap penny sleeves and upgrade later. But ofcourse, everything luke says is better for the cards, espacially if you drop them or the climate is very hot or cold. Personally for now i put them in penny sleeves, later i'll put the best ones in a perfect fit and double sleeve those.
Yeah, these days I do. Top loaders are great for protecting cards, but I prefer to be able to view them in the binder. They also make top loader binders, which some people swear by - but that’s a little overkill for me.
@@LegendofLuke I met the owner Clint at Houston collect a con and he is a great guy. They have so many sizes and options now. Recommend checking them out! Top of my Christmas list to Santa hoping it’s under the tree next week 👀
The reason they ask to send in a semi rigid is because they cut the semi rigid and take the card out so basically it's the easiest way to extract the card without damaging it.
Hey man, when you sell cards do you ship outside US? Im from The Netherlands in Europe and would love to support the channel! (and have a remedy for my bad pulls😅)
Absolutely love VaultX binders! They are such high quality and really feel great to hold and flip through. Have some of my master sets stored in these!
Same here!! 💯
It's a good idea to pop an AirTag in your case when you're traveling. Helps you keep tabs on your stuff and gives you a bit more peace of mind
Yeah good call 👍🏽
❤❤ Absolutely this!!!!! I also sleeve upsidedown it's the only way to sleeve!! Thanks for showing your go to items. Gonna be using some of these
Glad to hear I’m not the only one! 😄
Is absolutely love VaultX, the perfect fit sleeves are what I use all the time. I also really like the 12 pocket binders instead of 9, so much better to display cards! I really like my magnetic cases as well!
💯🙌🏽🔥
One note on the one touches, I have been using the Ultra Pro 35pt ones and they perfectly fit a Pokemon card that has a perfect fit sleeve on it. 12$ for 5 on Amazon.
Also if you use your fingers to expand the semi rigids before you insert the card they will slide in much easier and reduce the risk of gumming up the bottom edge of the card
Seriously good video, just what I was looking for as a new collector. Out of the ball park, mate!
Awesome - really glad to hear that!
I sleeve my board game cards and I can also vouch for that exact Japanese brand of perfect fit sleeves. They're not only affordable but they're actually perfect. I love them so much.
Ended up getting the VaultX binder with your code. It looks so good and it side loads AND it has a dark blue option? Sold. I almost went for the 12-per-page version but it's probably too excessive for now. If I get back into collecting heavily I might get one. For now I'm just getting some Pokemon cards for nostalgia. (Got a couple Etsy mystery bundles and picked up the Japanese 151 booster from Wal*Mart for basically half-off.)
Ever since I started watching you I started sleeving my cards like that! If you haven’t already, you should do a video of your collection! Looks so dope.
Haha nice! Yeah I’m due for a collection video.
@@LegendofLukeWould love to see that too!
This is the video I was looking for thank you.
You’re welcome!
Do vaultx not send their stuff to switzerland? Cuz i searched for the country on the option to pick for shipping, but it wasnt there?
I’m not sure 😕
Good points for protecting your cards Luke. Thanks, Merry Christmas, and God bless you and the family.
Thank you. Merry Christmas!
Hello, what’re the bags you have your graded cards in? Not the sleeves but the bags you had the graded cards in that little small black box
They’re actually the ones that BGS sends your cards back inn. Unfortunately, I’m not sure where to get them.
I use the Ultra Pro penny sleeves, but most of them are ETB sleeves. Do you recommend Etb sleeves?
I personally don’t use them. Some people say they are cheap and rip easily, but haven’t necessarily noticed that. What I don’t like about them is that they have a matte finish on them so it mutes the holofoil on your cards.
Thanks I just got back into Collecting the links will when I get some graded cards
Awesome man!
Do you have any experience with Ultra Pro Vivid binders? They're the binders I use. I've never used VaultX but from everything I can tell they're pretty much equal.
I’ve never bought on, but I believe they are pretty similar.
Great video - I love the quality of your channel!
Appreciate that!
Kmc perfect sleeve better or dragon shield prefect sleeve better ?
I use both together!
I do want to add that if you don't have a big budget that this isn't completely needed. I have my pokemon cards from when i was a kid (2003- ish) and i put them in a binder back then. No sleeves, binder doesn't have a zipper.
The cards still look great, altough they were always stored in a very dry room with a simmilar climate.
So unless you pull some stuff you want to make a profit on later, i'd say buy some cheap penny sleeves and upgrade later. But ofcourse, everything luke says is better for the cards, espacially if you drop them or the climate is very hot or cold. Personally for now i put them in penny sleeves, later i'll put the best ones in a perfect fit and double sleeve those.
💯
Nice video!! You have a lot of different techniques
Thanks Neisha!
@@LegendofLuke No Problem!!
Lukeeeee, great recs! Please tell me that's the same Koraidon you picked up from me :D
Yep it is!
Awesome, also I've never used the magnetic cases but I may need to pick them up as well as the graded car storage box for shows!@@LegendofLuke
Very helpful thank you
You’re welcome!
Hey Luke! Happy Holidays! Hope you are doing well!!! Thanks for all you do for the cardmunity! Amazing cards amazing channel! Do we win a giveaway?
Thank you Jason! Appreciate your continued support. Hope you have a merry Christmas and a happy new year.
I do need to pick the giveaway winner soon.
Some great tips thnx!
Glad you found them helpful!
Love your vids man.
Thanks Andrew!
Do you prefer double sleeving/binder instead of using top loaders? Thank you for the great vidoeo.
Yeah, these days I do. Top loaders are great for protecting cards, but I prefer to be able to view them in the binder. They also make top loader binders, which some people swear by - but that’s a little overkill for me.
Are binders really safe for cards ?
Yes, the ones I talked about in this video are.
for graded cards, can't beat Zion cases!
I’ve heard good things about those.
@@LegendofLuke I met the owner Clint at Houston collect a con and he is a great guy. They have so many sizes and options now. Recommend checking them out! Top of my Christmas list to Santa hoping it’s under the tree next week 👀
The reason they ask to send in a semi rigid is because they cut the semi rigid and take the card out so basically it's the easiest way to extract the card without damaging it.
Makes sense!
Hey man, when you sell cards do you ship outside US? Im from The Netherlands in Europe and would love to support the channel! (and have a remedy for my bad pulls😅)
Sorry, the only way I sell outside of the U.S. is on eBay: www.ebay.com/usr/legendofluke
@@LegendofLuke Shame, i'll check that link out tough, keep making great videos!
👍
Man I’m trying to not spend more money on pokemon cards….
*Sigh…opens Amazon*
Wow throwing a god comment in at the end.
🙂
Naa those snug ones going to f your car up
Peek consumerism