In this video I make a very useful woodworking tool - drill bit hole positioner. All free plans I ever made here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: grinwooddesigns@gmail.com Special thanks to Bill Boy and Ralph Whitesides for donates
Interesting concept. I can see how that would allow anyone the ability to make perfect fitted joints if they don't have other means to do so. Thumbs Up!
Hey... great and flexible to use tool. And if jou neet other diameters of dowels, you can replace the metal screws and make some with holes in the preferred diameter. cool stuff. Thanks
Класс! Чтоб кондуктор не был такой массивный, можно заранее сточить головки болтов до 1/3. А болты, которые держат боковые упоры, надо перед закручиванием намазать клеем, чтоб не разболтались, при использовании.
Outstanding design! Used bolts as drill guides before but this brings them to a "Hole" new level! Thanks always for your great ideas and sharing them with us!
Potentially a spring compressed between say a wing nut and bolt hardware could throw the wing nut into 'intermediate axis theorem' rotation with slightest left loose tork.
Все просто - на сверлильном столе фиксируеш упор, чтобы заготовку ложил каждый раз в одно и то же место, сверлиш отверстие, нарезаеш резьбу, вкручиваешь туда болт и вперед. Главное хорошо зафиксировать и не сдвигать упор, и следи, чтобы под заготовку не попадала стружка
Actually a dowelling jig- and very useful too. The problem with your design is that it does not reference from the same (outside) edge (that would require rotating the jig, and the hand marked holes would not be accurate enough) so it will only work with one thickness of wood. To solve this problem, remove the bolt heads and turn over the jig between drilling the two parts (so that you are drilling in the opposite direction). This will allow referencing from the outside edge of both parts, so it will work with a range of thicknesses. Interesting to watch someone do metalwork with woodworking tools- investing in a few files and perhaps a tap and die set would make life a bit easier...
Would adding another set of stops on the other side not solve the referencing problem? What is your opinion on that? As for different thicknes of materials, one could always make several of these jigs they are cheap enough. Also different lenghts for differenet cabinet depths.
@@bluewanderer9903 Always best to reference from the same edge. Material is rarely consistent in thickness. Navigate to my channel for my version that does this- and explains why it is important. One jig for all joints.
Добрый день! Я из Харькова с удовольствием смотрю ваш канал. И знаю,что Вы с Украины но с какого города не знаю. Хотелось бы по знакомиться и по общаться,если Вы не против?.
Brilliant idea.Wow!!!!Was wondering what the heck at start of video but was pleasantly surprised by finished product.Thanks for sharing.Stay safe.Subscribed.
Un des meilleurs JIG que j'ai pu voir sur UA-cam ! Bravo et merci pour ce partage. Salutations de France 🇨🇵 (Si ce n'est pas indiscret, de quel pays es tu ?)
In this video I make a very useful woodworking tool - drill bit hole positioner.
All free plans I ever made here:
drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing
GRINwood shop:
www.etsy.com/shop/GRINwood
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Special thanks to Bill Boy and Ralph Whitesides for donates
Amazing dowel hole jig!! Best I've seen so far!!
Файно! Робив такий самий років дванадцять тому, лишень залізний). Дружина заглядаючи мені через плече сказала: " О, такий як у тебе".))))
Успіхів!
Шикарная идея
Отличный кондуктор,спасибо.
Simple, but clever! All done.
Bravo Turkey İzmir selâm 👍🌹
تحيا مصر امه عظمي بين الامم وعاش جيشها العظيم خير اجناد الارض ❤ .
اللَّهُمَّ صَلِّ عَلَى سَيِّدِنَا مُحَمَّدٍ نُورِ الْأَنْوَارِ وَسِرِّ الْأَسْرَارِ وَسَيِّدِ الْأَبْرَارِ، وَزَيْنِ الُمرْسَلِينَ الْأَخْيَارِ وَأَكْرَمِ مَنْ أَظْلَمَ عَلَيْهِ اللَّيْلُ وَأَشْرَقَ عَلَيْهِ النَّهَارُ، وَعَدَدَ مَا نَزَلَ مِنْ أَوَّلِ الدُّنْيَا إِلَى آخِرِهَا مِنْ قَطْرِ الْأَمْطَارِ ،وَعَدَدَ مَا نَبَتَ مِنْ أَوَّلِ الدُّنْيَا إِلَى آخِرِهَا مِنَ النَّبَاتِ وَالْأَشْجَارِ صَلَاةً دَائِمَةً بِدَوَامِ مُلْكِ اللَّـهِ الْوَاحِدِ الْقَهَّارِ. 🧡 🕋🕌
اللهم صل وسلم على سيدنا محمد الفاتح لما اغلق والخاتم لما سبق ناصر الحق بالحق والهادي الى صراطك المستقيم وعلى اله حق قدره ومقداره العظيم🇾🇪🇾🇪🇾🇪🇾🇪
@GRINwood excelente como siempre!!!!!💪 💪 💪 🇦🇷 🇦🇷 🇦🇷
That there is absolutely wonderful.
Классный трафарет получился. Обязательно повторю))) 👍
Interesting concept. I can see how that would allow anyone the ability to make perfect fitted joints if they don't have other means to do so. Thumbs Up!
Inspired from Joint Genie no doubt. I like how you repurpose bolts as drill guide bushes, very creative.
Great Video!
ESPETACULAR !! 👍👍🏅🏅🇧🇷🇧🇷🇧🇷
Hey... great and flexible to use tool. And if jou neet other diameters of dowels, you can replace the metal screws and make some with holes in the preferred diameter. cool stuff. Thanks
Красавчег👍👍👍
thank you شكرا لك
Great, just Effin’ Great!
Clever idea, excellent execution and well demonstrated. A brilliant video start to finish. Cheers ...
Класс👍
А ещё совет, в местах прилегания приспособы, напротив болтов сделать П-образные вырезы для отвода стружки, для облегчения сверления.
В общем так: первый 👍 за идею, как просверлить болты по центру, второй 👍 за изготовление приспособления, третий 👍 за аккуратность!
Отличное исполнение. Отличный результат!
Home made joint genie. Genie,genius more like.
Subbed.
Very nice thanks
WOW! Hope you’ve patented it before Kreg Jig copies it! Makes my doweling jig look like a toy.
Nice versatile jig making holes....
All r good ideas very very nice👍👏
Класс! Чтоб кондуктор не был такой массивный, можно заранее сточить головки болтов до 1/3. А болты, которые держат боковые упоры, надо перед закручиванием намазать клеем, чтоб не разболтались, при использовании.
good idea bro
EXCELLENT!...very neat!..Thank you!...
very smart
Nice work!
what benefit does this have over steel bushings? or just using the holes in a hardwood guide directly? those large bolts aren't cheap...
Tuyệt vời 👍
Great job, seems like a long way to go for a doweling jig. That being said, I can see myself making this just as a “talking piece” thanks!
very nice 😍
thanks for sharing your art 👏👏👏
Excelente guía y extraordinaria ejecución. Te felicito y gracias por compartir tus proyectos. Saludos cordiales desde Buenos Aires, Argentina.
Outstanding design! Used bolts as drill guides before but this brings them to a "Hole" new level! Thanks always for your great ideas and sharing them with us!
Hole? You had to use hole? Yeah, you drilled us on that one.
Super
What a fabulous little jig 👍
Muito bom!
Aqui no Brasil ninguém fez assim.
Parabéns.
Amazing idea and nice job,,,BRAVO
I watch lots of these hints and tips -type of channels. But this is a GREAT idea! WOW! Respect!
Fantastic jig. Thank you.
Замечательно выполненная работа!
Very useful tool !! Thanks bro ... I really like your videos! Greetings from cuba.
Хааа, нифига как прикольно. Молодец. Такую же приблуду хочу.
Potentially a spring compressed between say a wing nut and bolt hardware could throw the wing nut into 'intermediate axis theorem' rotation with slightest left loose tork.
Excellent, beautiful work delivering your hands.
Amazing jig. looks so much better than the industrial types. simple and elegant.
"Well" done
мне понравилось, спасибо вам
Verry nice. Perfekt
Muito bom a criatividade
Super outil merci beaucoup pour cette vidéo mon ami 👍💪🙏💪👍
Este trabajo es muy bueno gracias por tu vídeo estás ayudando a mucha gente. La idea es muy buena. Un saludo desde España.
Мужик такую титаническую работу проделал...но увы это тот случай когда процесс ИНТЕРЕСНЕЕ результата
Solo due parole......sei grande
Mantap kawan...👍
you are truly the TOP. congratulations for your videos and ideas. keep it up my friend
Как удалось так точно по центру просверлить болт?
Все просто - на сверлильном столе фиксируеш упор, чтобы заготовку ложил каждый раз в одно и то же место, сверлиш отверстие, нарезаеш резьбу, вкручиваешь туда болт и вперед. Главное хорошо зафиксировать и не сдвигать упор, и следи, чтобы под заготовку не попадала стружка
@@GRINwood 👍🏻👍🏻👍🏻
Skvělá práce
Отличная приспособа! 👍
Excellent !!!! Merci pour cette vidéo très utile.....Bravo👍👍👏👏 Amitiés de France.....
Brilliant
great idea, Thanks for sharing
Молодец
Профессионалы такого высокого уровня должны знать, что стружку и опилки рукой не сметают
Nice idea 💡
muito bom gostei da ideia
Nice!! I love DIY tools!
Muito bom e útil
fantastic
Gran idea.
Wonderful!
Actually a dowelling jig- and very useful too.
The problem with your design is that it does not reference from the same (outside) edge (that would require rotating the jig, and the hand marked holes would not be accurate enough) so it will only work with one thickness of wood.
To solve this problem, remove the bolt heads and turn over the jig between drilling the two parts (so that you are drilling in the opposite direction). This will allow referencing from the outside edge of both parts, so it will work with a range of thicknesses.
Interesting to watch someone do metalwork with woodworking tools- investing in a few files and perhaps a tap and die set would make life a bit easier...
Would adding another set of stops on the other side not solve the referencing problem? What is your opinion on that?
As for different thicknes of materials, one could always make several of these jigs they are cheap enough. Also different lenghts for differenet cabinet depths.
@@bluewanderer9903 Always best to reference from the same edge. Material is rarely consistent in thickness. Navigate to my channel for my version that does this- and explains why it is important. One jig for all joints.
@@Tensquaremetreworkshop I will check it out, thank you.
@@Tensquaremetreworkshop joint master? Nota domino?
@@bluewanderer9903 not a domino…
Добрый день! Я из Харькова с удовольствием смотрю ваш канал. И знаю,что Вы с Украины но с какого города не знаю. Хотелось бы по знакомиться и по общаться,если Вы не против?.
Brilliant, dude! Really fantastic idea!!! 😃
Well done!!!
Stay safe there with your family! 🖖😊
11¹1¹11yeatĺ0ķ9⁸p
Best dowel jig ever!!!
I'm going to make one very soon...
Good job and thanks for your time!
Que maravilha de ferramenta, você é um gênio meus parabéns pela ideia agradeço por nos dar à oportunidade de poder aprender com você Um grande abraço.
bellissimo cortesemente é possibile avere il progetto, Grazie ciao
Brilliant idea.Wow!!!!Was wondering what the heck at start of video but was pleasantly surprised by finished product.Thanks for sharing.Stay safe.Subscribed.
Cool Job, thanks for the Show!
Дебільний інструмент,херня!
최고네요
What an awesome jig!👍🏻 I’ll have to make me one now! 😆 Thanks for sharing!
эта штука называется мебельный кондуктор,знаком с ней лет 20
Great video! Can even make a smaller version for dowels. Keep up the great work.
Seeing myself building a Parfguide like this
WHAT KIND OF BIT DID YOU USE TO MAKE TREAD IN THE WOOD ?? VERY NICE BUILT
Eh he shows you how he made the bit himself in the video.
Thanks a lot , yes I did see it 👍👍
Hello bushings
👍👍👍👍👍
Wood-Wizardry...
Un des meilleurs JIG que j'ai pu voir sur UA-cam !
Bravo et merci pour ce partage.
Salutations de France 🇨🇵
(Si ce n'est pas indiscret, de quel pays es tu ?)
отлично
👍👍👍👍👍👍👍👍👍👍
👍👍👍
WHAT KIND OF WOOD IS THAT ???
Ash
Классная приспособа
Matias Lucena ativando o sino e ver a criação do melhor vídeo sofre Jig furação, DEUS o abençoe.
Отличная идея, но с болтами можно не замарачиватся и просто вклеить трубки нужного диаметра.