Looks well fella top job and great to see just a normal fella doing it with out a endless amount of coin to throw at it like some other builds I see just what u got in your garage and a few 100 quid! Nice job
What tires did you use? And do they do pretty good? New pirellis are nice but looking for most aggresive back tire i can find and awesome job on build looks fantastic
Good job bud freaky good job. But one thing did you really have to take the motor out just to do a top end change. You have a GEM of a bike there. Next time save all your parts up and do a series. New bars seat levers maybe do some vapor honing and do some coatings tires and wheels also. Sounds great got to love the CR's this scars on the frame looked deep from the plastics.
Thanks bro. I didnt have to but I wanted to fully strip it down, clean things up and start from scratch. I built the bike on a "budget" so I only did what it needed plus a few things to make it look sick. I did actually do a full series on it. Go check out the playlist. Cheers for the support.👍
Turned out great. While the engine was out and bike was that far apart, should have done the bottom end and transmission as well as the forks and shock. Other than the top end, mostly a cosmetic "rebuild". The bike does look great tho.
Great transformation and colour scheme.
Fantastic job 👍
cr 250 and the rm 250 best looking builds ive seen great work. these should have millions of views!
Thanks mate
Looks well fella top job and great to see just a normal fella doing it with out a endless amount of coin to throw at it like some other builds I see just what u got in your garage and a few 100 quid! Nice job
appreciate it bro. All about fun not coin aye bro. Thanks for the support.
Wow beautiful dirt bike 👍👍👍👍
Beautiful!
Great job man! Looks and run amazing
Awesome job fella!!
Tooooooop my friend 👏🏻👏🏻👏🏻👏🏻
Nice job man.
Sick build my g. I just finished a Varner engine build and got it back together with a 2018 hrc suspension
Nice Honda build!
Great job!
My 02 is right in the middle, got most of the new bling, just waiting on Hinson clutch baskit and Pro taper oversized bars
sick project!!
So. Beautiful ❤❤❤
Very nice 👍
Bravo ottimo lavoro ..
Where the graphics from
Хорошая работа, это идеально 👌
Excelente makina
Did the replacement piston get or need holes drilled in it for the exhaust port bridge? Or did it come drilled already?
Oh, and tusk impact wheels, FMF Gnarly and seat
What tires did you use? And do they do pretty good? New pirellis are nice but looking for most aggresive back tire i can find and awesome job on build looks fantastic
man you gotta make a how to or something on the pipe for this one. plz and thank you!!
I did mate its up on the channel
Good job bud freaky good job. But one thing did you really have to take the motor out just to do a top end change. You have a GEM of a bike there. Next time save all your parts up and do a series. New bars seat levers maybe do some vapor honing and do some coatings tires and wheels also. Sounds great got to love the CR's this scars on the frame looked deep from the plastics.
Thanks bro. I didnt have to but I wanted to fully strip it down, clean things up and start from scratch. I built the bike on a "budget" so I only did what it needed plus a few things to make it look sick. I did actually do a full series on it. Go check out the playlist. Cheers for the support.👍
Always blip the throttle constantly or they will load up with oil
If you lived closer I would pay you to do the same for my good old 97 cr 250.
First
Top 👏👏👏
here from Facebook ad looks mean as bro, all i need is 7k now haha
Was it really 7k?
@@albertjankins2225 yeah but NZ currency
Where did you get thenwoody graphics? I want the same ones for my project!
Custom made. Any graphic shop will do it for u
💯👏👏👏👏
What was that red part you installed on the intake side of the engine?
Aftermarket reed valve
🥰👍😊🧿🙏👋👍 pörfekttt vonderfulll
What did you use to strip your pipe
Had it done by a nickel electro player. $80 all stripped then had it vapour blasted for the final finish.
Where did you get the graphics at?
Macmedia
if you are gonna do this u have to go goat rc woody the woodpecker graphics!!
That's what I did bro. Just got rid of the other sponsors and added in the old school cr logos.
It takes me at least an hour to get the air box boot onto my carburetor......
Can be a pain aye....
Sic
how much did you pick it up for?
2k
Hey mate love your work..👍🏻 where did you get the reed valve ?
Thanks alot. I got it of Facebook Marketplace. I searched it up and couldn't find much on it. They are ESR Carbon Reeds. See if u can find them.
@@motorvatednz7432 thanks a lot.. I hope to see some more rm 250 rebuild.. I’m doing mine atm.. 👍🏻 love your work mate
Yea will do. Have my 08 RM 250 coming up. Stay tuned!!
@@motorvatednz7432 I’m rebuild my 01 250 so I’ll be tune for sure 💪🏻
Turned out great. While the engine was out and bike was that far apart, should have done the bottom end and transmission as well as the forks and shock. Other than the top end, mostly a cosmetic "rebuild". The bike does look great tho.
You should not let 2 strokes idol like that
Don’t let it idle to much my gui
I'm Dream it but i Can't Get it 🥺
It honestly looked better before lol
Wicked bro, Glad u think I care. Lucky its not ur bike aye bro.
Hi ill pay you to talk me through this rebuild i have a 2001 CR250 I am Brisbane Australia
What do u mean bro. Message me on Instagram @motovated_nz
@@motorvatednz7432 yeah will do cheers
@@motorvatednz7432 hey man I would also pay you to walk me through I’m looking into buying a cr250r project as well to rebuild it !
Broooo please buy a fatbar handlebar the 7/8 bar is going to break or bend💀
All that work and didn’t even replace vent hoses 🤮
I'm Dream it but i Can't Get it 🥺