Привет из России. Сделал себе точно такие же. Теперь могу поставить большой стол в гараже для работы, а когда не нужно, убрать под стенку.👍👍👍 Вот только болтики не грел а просвелил в перемычке отверстия и туда вставил болты и ими креплю цепочку, получилось красивее.
I might have to try that my self some time with my arc welder. I liked how you used filler for those open spots saves a lot of time messing around instead of trying to cut the pipe ends perfectly to fit together.
Great job, my polish brother, 100% polish, born in Chicago,Illinois , hope I make it out to Poland some day. Great channel, great videos, thank you, 👍🌵😎 John Piegzik USA
It's a simply brilliant idea to be able to control the height just by using a larger chain. What I don't like is using so much inside tubing just to make it work as a huge hinge, maybe it could be cheaper to use two small hinges or even bolts as hinges on each side
tak samo spawałem szczeliny przy robieniu płotu, miałem prawie takie same okrągłe rurki, dawałem pręty zbrojeniowe odpowiedniej grubości. przy kolejnych łączeniach nauczyłem się podszlifowywac pod kształt pół okragly, było łatwiej spawać i mniej szlifowania pozniej
Fantastic work I was just planing to make a pair of metal stools. Your idea is so much superior to mine. Well done. Well filmed. Nice music. Big thumb up D.
EXCELENTE VIDEO MAESTRO COMO TODOS LOS QUE UD PUBLICA MUY SENCILLO Y DIDÁCTICO LO FELICITO Y LE DESEO UNAS MUY FELICES FIESTAS DESDE ARGENTINA SALUDOS!!!!!!
Those are NICE! I saw some made from rods for legs and pipes for cross pieces. A NICE job and I liked the shot of YOU and the pencil welding style as usual!
hello! it is great works i think very well! I have one question about your ladder, how heavy is it? i'd like to know how many kilograms and is it comportable to carry ? thank you!
Parabéns, um cavalete simples mas MUITO útil 👍🏼🇧🇷 parabéns nota 10!!!!!!! Ou " A ", por favor qual disco você usou para cortar o metal??? Obrigado bom final de semana....
Hello Friend. I was looking for a similar video, and yours was the best I've found to do it, simple and practical! However the description of the video is incorrect, missing a measurement (01 tube of 65 3/4). But it was worth this perfect.
Consider supporting us on UA-cam by using the button "JOIN" or click on this link:
ua-cam.com/channels/8KQ6_RNAvc7a3B5hZ980iQ.htmljoin
where could i get those presses?
Привет из России. Сделал себе точно такие же. Теперь могу поставить большой стол в гараже для работы, а когда не нужно, убрать под стенку.👍👍👍 Вот только болтики не грел а просвелил в перемычке отверстия и туда вставил болты и ими креплю цепочку, получилось красивее.
Цепочку закрепил так же.
@@ЮрийСтарик-ц1е Да.
everything I've seen of Poland makes me think that it's a place full of people that I respect. I hope you don't lose that grit and self-reliance
I might have to try that my self some time with my arc welder. I liked how you used filler for those open spots saves a lot of time messing around instead of trying to cut the pipe ends perfectly to fit together.
learned few things
1.use filler rod to fill the gap
2.adjustable high saw horse
3.hold the stick to overcome hand shake
and of course the best advice
4. Never use Hammershite
Great job, my polish brother, 100% polish, born in Chicago,Illinois , hope I make it out to Poland some day. Great channel, great videos, thank you, 👍🌵😎 John Piegzik USA
Nice trick with the ends of the welding rods. I know I will use this. Thanks for uploading.
It's a simply brilliant idea to be able to control the height just by using a larger chain. What I don't like is using so much inside tubing just to make it work as a huge hinge, maybe it could be cheaper to use two small hinges or even bolts as hinges on each side
the inside tubing makes it stronger and simpler to build. I prefer his idea
Hey lovekola...this is one of the best saw horse
tak samo spawałem szczeliny przy robieniu płotu, miałem prawie takie same okrągłe rurki, dawałem pręty zbrojeniowe odpowiedniej grubości. przy kolejnych łączeniach nauczyłem się podszlifowywac pod kształt pół okragly, było łatwiej spawać i mniej szlifowania pozniej
Such simple and compact frames, yet so versatile. Thanks for sharing.
Muy buen trabajo,excelente esos caballetes, un abrazo desde Córdoba Argentina 🇦🇷👍👍🤗
Wonderful work man! You have a good skill in electrode welding.
WOW. VERY COOL DESIGN. I LOVE IT.
Jak zwykle świetna robota czekam na kolejny filmik :)
the man is a legend. thanks
Very nice video! Like it! Your workshop looks more and more filled with tools and stuff, thats good!
Wonderful job.
Great design! Great Workmanship!! Now you have some new tools that will give you years of good service!!
Excellent ! Your are the futur Polish Diresta !!
GREAT job! I love how you do this using your own homemade tool!!!! Love this, nice build.
Very nice! Learned something new today...thanks!
This is what I was looking for.
Nice and thank you for the free Plans
i like it very much this will be my first project
Perfect! Thanks for sharing! What do you think of welding bearing balls to the ends instead of plastic closing ends?
I am so gonna copy this. :) Thanks for the galvanized pipe idea.
From Brazil 👍👏
Świetny pomysł i eleganckie wykonanie. Musze sobie takie zrobić
O cara é quase um Leonardo da Vinci. Parabéns ✌️
Fantastic work
I was just planing to make a pair of metal stools. Your idea is so much superior to mine.
Well done. Well filmed. Nice music. Big thumb up
D.
Outstanding work, show off. Thanks for the great ideas. Keep up the good work
Top Idea, master!
Dobra robota! Lecz to są koziołki warsztatowe.:)
Great saw horses , you are awesome finishing the the Job - details!!!
...a useful device and thanks for sharing it Mr Poland - hello from Brazil
Me gusto mucho tu idea. Muchas Gracias por compartir tu idea y talento, quedo suscrito, like y campana. Saludos desde Veracruz, México.
Merry Christmas, man !
Merry Christmas!
Which product did you go with the brush, is a type of varnish for galvanized pipe?
Perfeito , magnifico , esplendido , parabéns. mais 1vez
Jak zwykle odwaliles kawał dobrej roboty
😉
I really enjoyed your video. Thanks for sharing
Fantastic project, as usual. And once again, your stick welds look better than many-a-guy's TIG welds!!!!
Great looking awhorses.... I will give it try. Sturdy en cheap. Thanks for sharing !!!
thanks mr ... long live for you and your family... Ecuador 🇪🇨 here ...👌🏼
BRAVVO BİR KİŞİ DEMİRLE BU KADAR İÇİÇE OLUNA BİLİR.TEBRİKLER TEBRİKLER TEBRİKLER.
Ficou muito pratico e excelente. (Bauru, São Paulo; Brasil)
Very good, congratulations.
Excelente trabajo, 👍
Hej co to za pila do cięcia mozesz cos doradzić jaką kupić bo przymierzam się do kupna pily taśmowej
Świetna robota Darku!✌
An excellent job and very practical and useful....happy holidays...
Perfect bro, thank u
Me gustó mucho la idea donde está girando el tubo con la carretas para riel
Muy bien mi amigo felicidades y gracias por el dato. Saludos desde México
Very nice. Thank you for all the great ideas.
Olá , companheiro !
Esse cavalete suporta quantos kilos?
I discovered this time of horses about 3years ago and I think there are the best not heavy and strong
Witam. Jak się sprawuje ścisk kątowy przy spawaniu? Trzyma on parametry kąta prostego?
Sou seu fã. Você tem meu respeito! Parabéns!
Hi, Darek. I already made them from your idea, Thanks ...
Супер !Браво👍
Скажите пожалуйста а какой диск вы используете на распиловачном станке? Ссылку можно?
Great job!!!!, my friend!!!. Saludos desde Argentina!!!!😘
Che idea fantastica. Veramente un bel progetto. Congratulazioni. 🖒🖒🖒🖒
( italian ) 😉
Wow amazing video good job
EXCELENTE VIDEO MAESTRO COMO TODOS LOS QUE UD PUBLICA MUY SENCILLO Y DIDÁCTICO LO FELICITO Y LE DESEO UNAS MUY FELICES FIESTAS DESDE ARGENTINA SALUDOS!!!!!!
Never seen anyone hold the rod when ark welding before, do you find this technique easier? Regards
For me it is much easier to weld this way :)
Ładnie i prosto! Tak jak trzeba! :)
Those are NICE! I saw some made from rods for legs and pipes for cross pieces. A NICE job and I liked the shot of YOU and the pencil welding style as usual!
I just made a pair of dead tree carcass ones on account of the dead trees was free but yours are much better!!! Is that conduit or galvanized pipe???
It is galvanized pipe :)
hello! it is great works i think very well! I have one question about your ladder, how heavy is it? i'd like to know how many kilograms and is it comportable to carry ? thank you!
У меня тоже такая струбцина есть!
hey coolmvideo do you have any information about the chop saw you used there? maybee a link
At the and of a video is link how I made it ;)
Parabéns, um cavalete simples mas MUITO útil 👍🏼🇧🇷 parabéns nota 10!!!!!!! Ou " A ", por favor qual disco você usou para cortar o metal??? Obrigado bom final de semana....
Excellent Darek, I congratulate you, I would believe that I miss a piece, thank you very much.
Вечер добрый. Спасибо за видео. Какими кругами режете метал?
Good stuff
Did the plans link change?
Fantastic work, man. Really useful!
I like, very simple and effective.... thanks for sharing...
Exelente trabajo amigo 👍💪😃🙋♂️
Yo are a aweson. Respect!
siemanko. mam pytanie czego trzymasz elekrode w rekawicach a nie za rekojesc ?
Bo jest łatwiej, spróbuj ;)
Made in Poland oki dzieki kolego :)
Hello Friend.
I was looking for a similar video, and yours was the best I've found to do it, simple and practical!
However the description of the video is incorrect, missing a measurement (01 tube of 65 3/4). But it was worth this perfect.
ganhou um joinha só pelo jeito de segurar o eletrodo
Świetny projekt ;)
Hallo,
good idea and nice work. I like the adjustable high.
Will the evolution saw cut a 45 on 1 5/8 od rnd. (1 1/4 pipe)
I definitely want to use my everlast welder to make a couple of these.
Muy bueno. Excelente terminación.
very good! nice job. thank u
Muchas gracias por compartir tu trabajo, EXCELENTE.....
Buenisima.practica y desarmable
the bench casters is a great idea
What is I modify the overall height to one meter instead of 80?
Pros and cons please ?
Nothing bad will happen ;)
I mean why do not you modify your design abit
Speaking of me being like almost 2 meters tall =)
gdzie dostałeś uchwyty do spawania pod kątem 90°?
W opisie filmu jest link do niego :)
Great job Darek!!! Greetings from Argentina. Merry Chrismas!
Вот это круто, быстро, эстетично , бюджетно...!!!!
Great work, bravo. I will try to make one for me thanks to your plans.