Thank you!! I was looking at that last night! I have not made my mind up if I want to save a few oz and go Ti or not. I want the L for my 300bo handi rifle!
This was an excellent video especially on the 308 damn this thing is doing some work! I had an Enticer L on my Spear 308 and there's too much back pressure to feed correctly towards the top of the mag. Biggest difference I noticed on your 308 between the longer can and the sti was the back pressure, ejection was lookin 1 o'clock vs almost 4 o'clock on the Enticer S which is exactly what I need to slow my hot speed down and feed reliably Super helpful video!
I am running a Rifle Speed gas block on the AR10. I had it on setting 5 for suppressed, that's usually the setting I run with the Specwar and my normal ammo. But we shot it all up when the PTR91 showed up. So those were 150 and 180gr hunting rounds. I did not move it while shooting so the back pressure difference you see is the cans working. So if you're speaking on the Ar10 and not the PTR91 get that Rifle Speed system on your gun and dial it in with ease!!
@@SuppressedNation I'd love to but the sig Spear 308 is all proprietary and I only have 2 gas settings to work with lol, but this video did help me confirm that if I want an Enticer to run on this rig it should be the much lower back pressure Enticer S which still does a damn good job on a 16" 308 just as good or even better than some older suppressor designs over the L for sure!
@@wyodanjar8170 for this video it had the deadair keymo mount and break. It’s now got Hansohn Brothers Omni break which is plan b compatible. Much lighter and shorter setup.
If your shooting long range and not torturing them coletac, burnproof or liberty will do good. Liberty probably is overkill. Burnproof allows my viewers to use the code suppressednation to save a few bucks. Coletac is the easiest/ fastest to install.
I run adjustable gas blocks on everything so I don’t really notice gas on a lot of suppressors. I’m not adjusting them all to the specific can that day but usually have them set for the suppressor I normally have on the gun. I would only adjust it if the gun wouldn’t cycle from being to low of a back presssire or to gassy to my face. Neither have I had problem with yet. It sounds good so it’s got some back pressure no doubt but nothing you can’t fix tuning your rifle.
@@SuppressedNation Thats good to hear! Ive recently become interested in getting a suppressor and have been wondering how much tuning your rifle can mitigate the “gassy” suppressors but i believe that answers my question. Thanks for the reply and the video, DDC is definitely top of the list for my first suppressor!
@@angelavila8722 When we were metering and we used guns with adjustable gas blocks we could get almost every can we had out that day to meter within 1 db at the ear. Definitely a fan of a tuned gun over just slapping a Flo can on. To me I can get the tuned set up to perform how I want gas wise and sound wise. But even shooting with no can you still get gas coming back thru the gun. So having the ability to adjust can maximize its performance.
I have the Enticer S, non titanium on a 300 blackout and it’s crazy quiet. It’s ridiculously quiet. Wish I spent a little more and got the Titanium version just for weight.
I’m running mine on my 308 bolt gun. Was going to be in the video but got some fault Aguila ammo that blew up and messed it up. Trying to get parts now for future videos. You running a bolt gun or semi 300? I absolutely love it on my single shot! I need a L Ti!!
No, in all my years of shooting the only endcap strike I’ve had came from using an ebrake on a nomad. I was told I was stacking tolerances. The hit not only destroyed the endcap but also raised the ebrake up and destroyed the threads on that. Thankfully it did not hurt the threads on the can. I was told to send them in to be looked at and they would replace them. It’s been 4-5 years and no replacement has ever arrived 😔
I’ve got to fondle it and a few of their other cans up at Hansohn Brothers. I’ve been busy buying host so I can get more cans. Now I need to stop and get more suppressors! lol never ending cycle 🤣
Thank you I run a Rode video shotgun mic. You have to play around with the distance from the gun and volume settings on your camera to capture what sounds real. I know when I first got into making videos I was told to keep the mic close and volume low but that made everything sound quiet. When I would speak it would be super low and not real. I’ve gotten experience over the years to the distance and settings I like to capture a decent audio
I keep going back and forth between this and the Silencerco Scythe Ti for my hunting rifle. Have you been able to compare the two by chance? And thanks for the video!
No, my SilencerCo rep was suppose to bring one out to the house to shoot but his schedule has been busy, so I have only got to hold one. The Scythe and Spectre9 are two cans I'd like to pick up soon. Got a 10.5 300bo Noveske waiting on the Scythe and my Uzi showed up this week finally. So I'm in need of another 9mm can!!
My only dilemma is I built an AR9 with the SiCo receiver set tucking an Omega9k. Do I put the new Scythe on that one or leave the O9k? Real world problems LOL
On the single shot its the Hansohn's Ti 5/8 direct thread. On the 10.5 556 its Hansohn Brothers 1/2 Ti direct thread. On the 14.5 556 and ar10 its the silencerco asr. On the 6.5 ruger, AK, PTR and at the beginning where I'm talking its the Dead Air keymo. I think that's all the mounts. I'm working on switching a bunch of the guns I use for videos on the regular to plan b compatible devices. It can be a pain to pull what I normally run on a certain gun to drop a specific mount just for a video. Especially when it's a bunch of guns. So hoping to streamline the process! lol
I only have 5 cans now, and plan on at least 4 more, but I just can not get excited about the S or K cans. For my money, I want maximum hush. I do not mind the extra 2 inches and slightly bigger girth (That's what she said) as a trade to get ear-friendly performance. I get the idea of the short cans. They look much cooler, and would be better in CQB use. However, I am not kicking doors or running around engaging anything, so the extra length is not a problem for me. As for the cool factor - I learned a long time ago, no matter what I use or what I do, I am not the cool kid.....😏😏
@@44Mag sir you are cool kid in my book! This S performed like some of my full size cans. That why I love it but I do want the L for maximum quiet. Not so much for supers because no matter what most are still loud. With bolt actions you can get really good ear performance but still have that crack. But a good long can with subs …🥰 oh my! The Enticer L Ti and Resilient Jolene are two full size cans I want! Shot the enticer this weekend at cancon. So nice!
@@SuppressedNation My 30cal can is the CGS Hyperion, and it does a great job and both db reduction and a beefier tone. I can highly recommend it. For 9mm/300blk I use the Mod9 (also from CGS) - No, I am not a CGS fan-boy - I just found those two to work the best for me. The Mod9 lives on my .380 and it is back-yard quiet, if you have a slightly above average size yard. (Not as quiet as the Mask in .22 - a little louder, but much throatier) Cheers!
@@44Mag I have the kraken and kraken sk here which are the same baffle design as yours just has a few changes to the tube, think I have serial number 5 or 6. Something silly low. I had the Hyperion 6.5 here and it was impressive.I think there are better cans out for 9mm and 300bo now but I still think the mod9 is a solid can. I'm running my full-size on the mp5 zenith clone with a 3 lug and the k version is on the ghm9.The k it knocks the edge off but not really a good can for someone wanting to be quiet.
I was in the same boat. I bought a Nomad LTi and sandman L for max suppression for my needs. But now I wish I went shorter. Nomad 30 size or shorter for hunting. At least with my 24” 300 prc. Now I’m looking into a new shorter can. Been seeing a lot of the enticer mentioned on the forums. Hence watching this review.
@ well hopefully this video helped you some. I love the Diligent cans and they are good people! I’m in the opposite boat now and want some long cans for maximum suppression for some 300bo guns. The Nomad L is a great can. Wish I could have shot it side by side with the Enticer L at Cancon.
Sorry about that , all my ars have adjustable gas blocks so I try to tune them to run pretty smooth without a ton of gas to the face. On rails that are tight to the can I run Superlative and if they have room in-between I run the RifleSpeed. I actually hacked into my 300bo so that I could run a RifleSpeed. It's no super low back pressure but a lot less than my Rugged cans I feel.
I have not shot the Enticer L but most cans that have the s & l you don’t really notice the difference with supers as much but with subs you go from quiet to wow that’s insanely quiet. I need an L for my Handi Rifle
Thank you 16" Armalite barrel 12" armalite quadrail rifle speed gas block silencerco asr mount and specwar762 coletac od cover accutac bipod giessele 2 stage trigger kac iron sights nightforce shv in an adm mount kungfu grip lmt sopmod stock and I believe a bcm charging handle cerakoted od green
absolutely loved the triple screen play, top down. bad arse!!
Heck yeah! Glad you enjoyed it and appreciate you watching!
Best video on the enticer, thank you!
Well your comment made my day!! Thank you for watching and taking the time to drop a comment! I enjoy hearing feedback on videos!!
Another great video brother! I have an Enticer L stainless can coming! I think the Lti did as well as the full length cans.
Thank you!! I was looking at that last night! I have not made my mind up if I want to save a few oz and go Ti or not. I want the L for my 300bo handi rifle!
@@SuppressedNationthat radiant sounds pretty good on there I’d love to see more videos if you get that L
@@williamboggs1682 one day!! I got so many cans here I need to make videos of! Right now works picking up and hunting season is upon us!
Great review. This might have finally sold me on the Enticer. You gained a new subscriber. Gotta go back & look at some of your other stuff now.
@@antiontaylor262 much appreciated sir! I need to get more guns so I can get more Diligent cans!
This was an excellent video especially on the 308 damn this thing is doing some work! I had an Enticer L on my Spear 308 and there's too much back pressure to feed correctly towards the top of the mag.
Biggest difference I noticed on your 308 between the longer can and the sti was the back pressure, ejection was lookin 1 o'clock vs almost 4 o'clock on the Enticer S which is exactly what I need to slow my hot speed down and feed reliably
Super helpful video!
I am running a Rifle Speed gas block on the AR10. I had it on setting 5 for suppressed, that's usually the setting I run with the Specwar and my normal ammo. But we shot it all up when the PTR91 showed up. So those were 150 and 180gr hunting rounds. I did not move it while shooting so the back pressure difference you see is the cans working. So if you're speaking on the Ar10 and not the PTR91 get that Rifle Speed system on your gun and dial it in with ease!!
@@SuppressedNation I'd love to but the sig Spear 308 is all proprietary and I only have 2 gas settings to work with lol, but this video did help me confirm that if I want an Enticer to run on this rig it should be the much lower back pressure Enticer S which still does a damn good job on a 16" 308 just as good or even better than some older suppressor designs over the L for sure!
Oh man only two setting! You’d think with all the suppressors and different ammo types they would leave some more wiggle room than that.
Great can but I personally think the Liberty Precision Machine Mach S is my favorite .30 caliber S can.
That’s cool, I have not shot any of their cans yet but have a few I’d like to pick up. I’ve been told they are solid performing suppressors!
I have a Liberty precision S I got from Hanson Brothers about two months ago and they are a great cans
@@waltermatney6090 I need some LP in my collection!!
Thank you for the video! Comparison was super close but price is way better! 👍
My son came home from work last night and asked what can was that again on the Ak? lol he fell in love with the enticer and subs out of the ak
Woah... I drive an STi...
And i have a few stis....
Now I can get a silencer to match them?!
But all of my STIs are louder than this... especially when I take a piss....
I just checked the owners manual and it specifically states that if you drive a STi then you must pick one of theses cans of from @hansohnbrothers
On the 6.5 creed, what muzzle brake were you attaching the s-ti to?
@@wyodanjar8170 for this video it had the deadair keymo mount and break. It’s now got Hansohn Brothers Omni break which is plan b compatible. Much lighter and shorter setup.
Wife and I are looking to go to Wytheville later in the year and do their long range class. You have a fav suppressor cover to keep mirage down?
If your shooting long range and not torturing them coletac, burnproof or liberty will do good. Liberty probably is overkill. Burnproof allows my viewers to use the code suppressednation to save a few bucks. Coletac is the easiest/ fastest to install.
Coletac is awesome!
@@SuppressedNation 👍
Hows the gas blowback on these compared to other suppressors? It looked pretty good on the semiautos other than the 308s lol
I run adjustable gas blocks on everything so I don’t really notice gas on a lot of suppressors. I’m not adjusting them all to the specific can that day but usually have them set for the suppressor I normally have on the gun. I would only adjust it if the gun wouldn’t cycle from being to low of a back presssire or to gassy to my face. Neither have I had problem with yet. It sounds good so it’s got some back pressure no doubt but nothing you can’t fix tuning your rifle.
@@SuppressedNation Thats good to hear! Ive recently become interested in getting a suppressor and have been wondering how much tuning your rifle can mitigate the “gassy” suppressors but i believe that answers my question. Thanks for the reply and the video, DDC is definitely top of the list for my first suppressor!
@@angelavila8722 When we were metering and we used guns with adjustable gas blocks we could get almost every can we had out that day to meter within 1 db at the ear. Definitely a fan of a tuned gun over just slapping a Flo can on. To me I can get the tuned set up to perform how I want gas wise and sound wise. But even shooting with no can you still get gas coming back thru the gun. So having the ability to adjust can maximize its performance.
I have the Enticer S, non titanium on a 300 blackout and it’s crazy quiet. It’s ridiculously quiet. Wish I spent a little more and got the Titanium version just for weight.
I’m running mine on my 308 bolt gun. Was going to be in the video but got some fault Aguila ammo that blew up and messed it up. Trying to get parts now for future videos. You running a bolt gun or semi 300? I absolutely love it on my single shot! I need a L Ti!!
I have the s in ti and it’s so nice! I only went with the ti version cause the stainless was sold out but I’m very happy I did.
@@daltonbell7332 Yeah the Ti is the bees knees.Hopefully one day I'll grab a L Ti as well!
bolt or semi?
@@malikfarris1727 who and what exactly you wanting to know? I’ll see if I can get you answers
Have you tried it with the Dead Air E-Brake?
No, in all my years of shooting the only endcap strike I’ve had came from using an ebrake on a nomad. I was told I was stacking tolerances. The hit not only destroyed the endcap but also raised the ebrake up and destroyed the threads on that. Thankfully it did not hurt the threads on the can. I was told to send them in to be looked at and they would replace them. It’s been 4-5 years and no replacement has ever arrived 😔
@@SuppressedNation Dang. that's one of the cool things about the Enticer IMO(if you're into E-Brakes).
I thought it made a noticeable difference on the 308 and 3006 we was using.
In stock now at Hansohn Brothers. :)
A few models of the Diligent cans in stock last I looked!
Did you guys paint it? Mine came in true ti finish. No paint
No it was a limited run when they first released them I believe. Not sure how many they actually did in this color but I love it!!
I have the same can and love it. You should check out their 22lr can called the road hunter. It’s awesome as well.
I’ve got to fondle it and a few of their other cans up at Hansohn Brothers. I’ve been busy buying host so I can get more cans. Now I need to stop and get more suppressors! lol never ending cycle 🤣
What are you guys using to get the sound recorded? Very clear.
Thank you I run a Rode video shotgun mic. You have to play around with the distance from the gun and volume settings on your camera to capture what sounds real. I know when I first got into making videos I was told to keep the mic close and volume low but that made everything sound quiet. When I would speak it would be super low and not real. I’ve gotten experience over the years to the distance and settings I like to capture a decent audio
I keep going back and forth between this and the Silencerco Scythe Ti for my hunting rifle. Have you been able to compare the two by chance?
And thanks for the video!
No, my SilencerCo rep was suppose to bring one out to the house to shoot but his schedule has been busy, so I have only got to hold one. The Scythe and Spectre9 are two cans I'd like to pick up soon. Got a 10.5 300bo Noveske waiting on the Scythe and my Uzi showed up this week finally. So I'm in need of another 9mm can!!
@@SuppressedNation The Spectre's another really cool looking can, would fit great on an Uzi!
My only dilemma is I built an AR9 with the SiCo receiver set tucking an Omega9k. Do I put the new Scythe on that one or leave the O9k? Real world problems LOL
Who’s mount are you running on it?
On the single shot its the Hansohn's Ti 5/8 direct thread. On the 10.5 556 its Hansohn Brothers 1/2 Ti direct thread. On the 14.5 556 and ar10 its the silencerco asr. On the 6.5 ruger, AK, PTR and at the beginning where I'm talking its the Dead Air keymo. I think that's all the mounts. I'm working on switching a bunch of the guns I use for videos on the regular to plan b compatible devices. It can be a pain to pull what I normally run on a certain gun to drop a specific mount just for a video. Especially when it's a bunch of guns. So hoping to streamline the process! lol
Damn! I really gotta give this can another look
@@Fr3d671 Diligent knows how to create a good suppressor! I really need to get a L
I only have 5 cans now, and plan on at least 4 more, but I just can not get excited about the S or K cans.
For my money, I want maximum hush. I do not mind the extra 2 inches and slightly bigger girth (That's what she said) as a trade to get ear-friendly performance.
I get the idea of the short cans. They look much cooler, and would be better in CQB use. However, I am not kicking doors or running around engaging anything, so the extra length is not a problem for me. As for the cool factor - I learned a long time ago, no matter what I use or what I do, I am not the cool kid.....😏😏
@@44Mag sir you are cool kid in my book! This S performed like some of my full size cans. That why I love it but I do want the L for maximum quiet. Not so much for supers because no matter what most are still loud. With bolt actions you can get really good ear performance but still have that crack. But a good long can with subs …🥰 oh my! The Enticer L Ti and Resilient Jolene are two full size cans I want! Shot the enticer this weekend at cancon. So nice!
@@SuppressedNation My 30cal can is the CGS Hyperion, and it does a great job and both db reduction and a beefier tone. I can highly recommend it. For 9mm/300blk I use the Mod9 (also from CGS) - No, I am not a CGS fan-boy - I just found those two to work the best for me. The Mod9 lives on my .380 and it is back-yard quiet, if you have a slightly above average size yard. (Not as quiet as the Mask in .22 - a little louder, but much throatier)
Cheers!
@@44Mag I have the kraken and kraken sk here which are the same baffle design as yours just has a few changes to the tube, think I have serial number 5 or 6. Something silly low. I had the Hyperion 6.5 here and it was impressive.I think there are better cans out for 9mm and 300bo now but I still think the mod9 is a solid can. I'm running my full-size on the mp5 zenith clone with a 3 lug and the k version is on the ghm9.The k it knocks the edge off but not really a good can for someone wanting to be quiet.
I was in the same boat. I bought a Nomad LTi and sandman L for max suppression for my needs. But now I wish I went shorter. Nomad 30 size or shorter for hunting. At least with my 24” 300 prc. Now I’m looking into a new shorter can. Been seeing a lot of the enticer mentioned on the forums. Hence watching this review.
@ well hopefully this video helped you some. I love the Diligent cans and they are good people! I’m in the opposite boat now and want some long cans for maximum suppression for some 300bo guns. The Nomad L is a great can. Wish I could have shot it side by side with the Enticer L at Cancon.
No mention of Gas in face with the AR’s
Lots? Some? None?
The L as of right now is top of the list
I have a 24” 6 ARC that needs a can
Great Vid 👍😎
Sorry about that , all my ars have adjustable gas blocks so I try to tune them to run pretty smooth without a ton of gas to the face. On rails that are tight to the can I run Superlative and if they have room in-between I run the RifleSpeed. I actually hacked into my 300bo so that I could run a RifleSpeed. It's no super low back pressure but a lot less than my Rugged cans I feel.
That 220 gn ak ammo. Whoa.
Callaway has that stuff dialed in!! I’ve never heard an Ak so quiet
🔥
👊🏻👊🏻
How much better is the L than the S
I have not shot the Enticer L but most cans that have the s & l you don’t really notice the difference with supers as much but with subs you go from quiet to wow that’s insanely quiet. I need an L for my Handi Rifle
That Armalite looks damn sexy, got a build list?
Thank you
16" Armalite barrel
12" armalite quadrail
rifle speed gas block
silencerco asr mount and specwar762
coletac od cover
accutac bipod
giessele 2 stage trigger
kac iron sights
nightforce shv in an adm mount
kungfu grip
lmt sopmod stock
and I believe a bcm charging handle
cerakoted od green