HI Bill. I follow most of your details but I want to adapt this to my DLG and need directions to obtain a launch mode situation with the rudder offset . I will be useing the Jumper T-Lite Pro. Being left handed I will use SWD. Would appreciate your imput Cheers Colin
Hi Colin, you need to set up your rudder to a switch in the mixes. So add a line to the rudder, in the MIXES, first line normal position position 2 add the off set you require for launch mode. You could set up a Logical Switch to apply the offset for a set time period and then advert back to normal rudder position using a momentary switch.
@@the-happy-RC-flyer Hi Bill Have followed your instructions and it is working perfect. My question, is it possible to use this setup and have a slight up elevator on the same sw. Your help is much appreciated Cheers Colin (down under in New Zealand)
@@patterdalebt in the MIXES add a line to the elevator mix set your weight and assign the switch which you wish to activate the elevator adjustment. Elevator mixing can be used to apply down elevator when deploying the flaps.
Bill can you show how to set flaps with ailerons and brake also launch mode for a DLG, thanks. I got my new T16 and there is not much video how to program for these models. thanks !!!!
Hi Juan, I will add your suggestions to my recording schedule and see what I can do for you. Please let me know in the comments do you mean Flaperons or separate Flaps and Ailerons?
Any idea on how to set throttle cut? I saw one video but it seemed a little complicated . I come from SPEKTRUM and it is pretty straight forward but I just don’t see anything in the jumper t16 menu that says throttle cut. 🙏🙏🙏 any info on that?... thanks again... stay safe!!!
Diego if you are setting up a quad copter your flight controller is going to control your arming process via the firmware and via the switch you allocate as the Arming Switch, set up under Inputs. If you are setting up a fixed wing here is my video on how to set up a "Safe" throttle with switch arming. I hope this helps. ua-cam.com/video/B6jbDA7a10s/v-deo.html You stay safe too.
If you mean the sounds you need to set up the sounds under special functions please see my video ua-cam.com/video/DvJFPIjTdEo/v-deo.html Timeline 10:00 minutes This should help you.
@@the-happy-RC-flyer hi Bill. ok so your video helped. BUT i seem to be missing alot of voices in my list. i notice yours is the american voice and mine is the british one. any ideas? thanks
Capposteve you need to add Amber Sounds if you wish to have the same sounds as my Jumper T16 here is a link to my video which will help you download and install the Amber Sounds on your SDCard. ua-cam.com/video/9B_guG_b7vw/v-deo.html&feature=share Let me know how you get on.
Hi bill I'm having trouble setting up safe select for a UMX eflite A10 thunderbolt . Do you have any info to help me out thankyou have a wonderful day. I have the jumper t18 pro .
@@the-happy-RC-flyer hey thankyou for getting back to me .so my radio is jumper t18 pro the plane is horizon hobbys newest elfite UMX a 10 thunderbolt 11 . So I got the airplane to bind up and all surface reverse . But this this plane has 3 flight mode . The first mode is called safe mode which keeps the airplane stable in the air at all times like a gyro . and the next mode is called AS3X MODE and this mode makes small corrections in the air and the pilot almost has all the control of the aircraft. Then the 3rd mode is total control of the plane . I do not know how to set this up to use as it it a micro plane it is a dsmx protocol . I just don't want to have to go out and spend the money for a spektrum transmitter . I seen a vid of a guy who got that same model airplane and set it up on the jumper t lite but he wouldn't help me so I know its possible just don't know how to get it working . Thankyou so much for getting back to me you are awesome !!!!
@@aaamodeltrainsandplanes3774 You need to set up a 3 position switch which will need to match up to the channel the receiver is expecting the signals from. It should show you in the manual that comes with your model. You then need to set up a mix on that channel in your radio.
i like these little video's that take you straight to the point. thanks bill. i am now tinkering with flight modes.
never used flight mode function before. I will be using it from now on.
Thank you! I guess this answers my question 😬😂
Thank u for this video. Oh yes I like this way better u 🎸 rock 🎸
HI Bill. I follow most of your details but I want to adapt this to my DLG and need directions to obtain a launch mode situation with the rudder offset . I will be useing the Jumper T-Lite Pro. Being left handed I will use SWD. Would appreciate your imput Cheers Colin
Hi Colin, you need to set up your rudder to a switch in the mixes. So add a line to the rudder, in the MIXES, first line normal position position 2 add the off set you require for launch mode. You could set up a Logical Switch to apply the offset for a set time period and then advert back to normal rudder position using a momentary switch.
@@the-happy-RC-flyer Hi Bill Have followed your instructions and it is working perfect. My question, is it possible to use this setup and have a slight up elevator on the same sw.
Your help is much appreciated Cheers Colin (down under in New Zealand)
@@patterdalebt in the MIXES add a line to the elevator mix set your weight and assign the switch which you wish to activate the elevator adjustment. Elevator mixing can be used to apply down elevator when deploying the flaps.
@@the-happy-RC-flyer Once again thanks for your advise you do make it easy to follow. again much appreciated. Cheers
Bill can you show how to set flaps with ailerons and brake also launch mode for a DLG, thanks. I got my new T16 and there is not much video how to program for these models.
thanks !!!!
Hi Juan, I will add your suggestions to my recording schedule and see what I can do for you. Please let me know in the comments do you mean Flaperons or separate Flaps and Ailerons?
yes i mean Flaperons, thanks a lot
Any idea on how to set throttle cut? I saw one video but it seemed a little complicated . I come from SPEKTRUM and it is pretty straight forward but I just don’t see anything in the jumper t16 menu that says throttle cut. 🙏🙏🙏 any info on that?... thanks again... stay safe!!!
Diego if you are setting up a quad copter your flight controller is going to control your arming process via the firmware and via the switch you allocate as the Arming Switch, set up under Inputs.
If you are setting up a fixed wing here is my video on how to set up a "Safe" throttle with switch arming. I hope this helps.
ua-cam.com/video/B6jbDA7a10s/v-deo.html
You stay safe too.
Thanks. I have one issue. Mine shows armed and disarmed. But does not tell me. How do I turn this on? Thanks
If you mean the sounds you need to set up the sounds under special functions please see my video ua-cam.com/video/DvJFPIjTdEo/v-deo.html Timeline 10:00 minutes
This should help you.
Bill Clark thanks. Will take a look.
@@the-happy-RC-flyer hi Bill. ok so your video helped. BUT i seem to be missing alot of voices in my list. i notice yours is the american voice and mine is the british one. any ideas? thanks
Capposteve you need to add Amber Sounds if you wish to have the same sounds as my Jumper T16 here is a link to my video which will help you download and install the Amber Sounds on your SDCard.
ua-cam.com/video/9B_guG_b7vw/v-deo.html&feature=share Let me know how you get on.
Hi bill I'm having trouble setting up safe select for a UMX eflite A10 thunderbolt . Do you have any info to help me out thankyou have a wonderful day. I have the jumper t18 pro .
Could you clarify safe select what is it your are trying to set up?
@@the-happy-RC-flyer hey thankyou for getting back to me .so my radio is jumper t18 pro the plane is horizon hobbys newest elfite UMX a 10 thunderbolt 11 . So I got the airplane to bind up and all surface reverse . But this this plane has 3 flight mode . The first mode is called safe mode which keeps the airplane stable in the air at all times like a gyro . and the next mode is called AS3X MODE and this mode makes small corrections in the air and the pilot almost has all the control of the aircraft. Then the 3rd mode is total control of the plane . I do not know how to set this up to use as it it a micro plane it is a dsmx protocol . I just don't want to have to go out and spend the money for a spektrum transmitter . I seen a vid of a guy who got that same model airplane and set it up on the jumper t lite but he wouldn't help me so I know its possible just don't know how to get it working . Thankyou so much for getting back to me you are awesome !!!!
@@aaamodeltrainsandplanes3774 You need to set up a 3 position switch which will need to match up to the channel the receiver is expecting the signals from. It should show you in the manual that comes with your model. You then need to set up a mix on that channel in your radio.