Top Tip. Put a Baby Bottle cleaner brush inside the Cylinder. It gets rid of the annoying ping. A little work on the Trigger Sear will also lighten the Trigger. Check video for Kral Trigger mod. Or you can simply buy a JSAIR Trigger Sear.
I made some changes to the Kral I bought from you. I lowered the trigger pull down to 12 oz. I also put the barrel band back on and machined a bushing to support the barrel without the shroud. Lastly, I put a gloss Urethane finish on it.
I SAW UK VERSIONS OF THE PUNCHER BREAKER. THEY HAVE A DIFFERENT BARREL BAND. IT'S SMALLER AND GOES AROUND THE BARREL, WITHOUT THE SHROUD. I WONDER IF YOU CAN ORDER IT IN THE USA. UK VERSIONS ALSO HAVE A SCREW ON MODERATOR, OR SUPRESSOR. IT ALSO LOOKS LIKE THE UK VERSIONS HAVE A LONGER BARREL. THE THREADS ON THE END OF THERE BARRELS STICK OUT BEYOND THE PRESSURE GUAGE
I BOUGHT A PUNCHER BREAKER IN .25 CAL. MINE SHOOTS 920 FPS DOWN TO 901 FPS, FOR THE FIRST 10 SHOTS. , USING H&N 20GR PELLETS. SO FAR NO PROBLEM. IT'S ACCURATE AND POWERFUL. THAT .25 CAL IS MUCH LARGER THAN A .22 CAL WHEN YOU ACTUALLY SEE IT FOR THE FIRST TIME
Always thought the Breaker was a bit on the loud side,good to know that theres better silencing options,I have 3 different types of silencer I can use,all 1/2 UNF thread,a TKO,good quality,works well but around $90,a Bwalton LDC,works fine,quality not quite as good but around $65 and a Wolf silencer,finish is good and around $55 but not quite as quiet as the other 2. There is silencer options out there in the U.S,just have to do a bit of searching.
I need to ask you a question ...have you had any problems with your karl puncher ??? cuz im thinking of getting one .. awesome video great information ty
Hello. kindly, could you give me the measurements of the steady at 8.. height, diameter of the 2 circles, width (thickness..) and of the silencer.. diameter and length.. In Italy and Europe I can't find those 2 pieces.. so I thought I'd get them done.. if they don't cost a fortune.. Thanks so much!!!
Can you tell me what the rifling twist is on the Kral .22? I'm must wondering because you seem to indicate that when you shoot the heavier pellets, they start to destabilize beyond a certain distance.
@@TexasAirGunner thanks for quick response as I am shopping now. I just spoke with rep from a company who said it would be possible but take 100+ strokes and last 50 would be very difficult. Thoughts? Can you recommend a good pump under 200 if that's possible . Thanks
hello. after watching this video, I attempted to remove the shroud off of mine. I found the set screw on the side and I remove it. the shroud slides up several inches then stops. what am I missing? thanks
Steve Zamarripa the shroud comes off just by unscrewing it. the air gauge end cap unthreads and the fill probe cover just slides off. the barrel and air cylinder mount just has 2 allen screws on each side. remove those then slide off. the shroud just might feel stuck. Just pull it. remove shroud first
If u fill it to 3300 psi u will get about 4 or 5 full fills to 200bar and about 10 to 190 and about 20 to 180 and less and less. So about 30-40 fills to 180bar. Ull have to get a 60min scba 4500psi tank to get about 40 to 50 or maybe more full 200bar fills. I get 30+ full fills with my tank at 230 bar on the streamline. Then it starts to drop. About 60 with the kral
Nice video I appreciate your honesty but I am right there with you I have got to Benjamin Marauder airguns a 22 and a 25 caliber and I have a daystate Regal 22 caliber air gun and there is no comparisons to the to I guess you get what you pay for and I really wouldn't want to buy a puncher breaker do the fact that it's heavy the trigger is not as good and for me to buy a gun like that would be going backwards compared to the daystate Regal because if they ever made a air gun that was perfect that gone there is about as close as you're going to get the only other gun that I could even compare to that style of God that is more like a real gun and doesn't have a great big tube and weight in pounds would be the FX streamline rifle because I know they both have great triggers and that's the bottom line to any air gun any rifle any crossbow if it has a really good trigger you will be able to shoot it really well but I have got that beautiful daystate Regal with the Walnut stock that is just gorgeous my buddies look at it and they cannot believe how beautiful that none is and I bought that it airguns of Arizona when they had it on sale for $999 come with the silencer on the end at a full fill you can get around 50 really good shots without a regulator in it it has the Harper Patton slingshot system and the titanium valve and the gun is light like the Streamline just a little over six pounds nicest gun that I have ever shot nicest gun that I have ever owned so if I bought the puncher breaker I would feel like I was going backwards but great video and keep up the good work I love watching them
I hear u totally. i bought the gun specifically for testing and reviewing. it did better then I thought for price. completely satisfied with the kral products. great product for the money
I didnt have that prob. Make sure the whole barrel stayed secured. The shroud shouldnt affect accuracy. Also check the crown of the barrel and make sure its good...
rafael rodriguez no baffles or anything u can do to the tube is better then these real silencers. Reduce the noise on high power to sound like low power setting.
Mine is a Troy tuned gun and the quiet kit doesn't impress me. This dude knows what he's talking about. I'll sell you another quiet kit and shroud if you want. lol
Top Tip.
Put a Baby Bottle cleaner brush inside the Cylinder. It gets rid of the annoying ping.
A little work on the Trigger Sear will also lighten the Trigger. Check video for Kral Trigger mod. Or you can simply buy a JSAIR Trigger Sear.
I made some changes to the Kral I bought from you. I lowered the trigger pull down to 12 oz. I also put the barrel band back on and machined a bushing to support the barrel without the shroud. Lastly, I put a gloss Urethane finish on it.
Nice...
out of what material did you make the bushing? i want to do the same with my breaker
I SAW UK VERSIONS OF THE PUNCHER BREAKER. THEY HAVE A DIFFERENT BARREL BAND. IT'S SMALLER AND GOES AROUND THE BARREL, WITHOUT THE SHROUD. I WONDER IF YOU CAN ORDER IT IN THE USA. UK VERSIONS ALSO HAVE A SCREW ON MODERATOR, OR SUPRESSOR. IT ALSO LOOKS LIKE THE UK VERSIONS HAVE A LONGER BARREL. THE THREADS ON THE END OF THERE BARRELS STICK OUT BEYOND THE PRESSURE GUAGE
I BOUGHT A PUNCHER BREAKER IN .25 CAL. MINE SHOOTS 920 FPS DOWN TO 901 FPS, FOR THE FIRST 10 SHOTS. , USING H&N 20GR PELLETS. SO FAR NO PROBLEM. IT'S ACCURATE AND POWERFUL. THAT .25 CAL IS MUCH LARGER THAN A .22 CAL WHEN YOU ACTUALLY SEE IT FOR THE FIRST TIME
Heith Watkins yeah i didnt buy the 25 cause shot count and i have the streamline in 25. the kral is a great gun and specially for the $...
TexasAirGunner THANKS FOR SHARING YOUR INFORMATION. I WOULD LIKE TO SEE A REGULATOR INSTALLED IN A PUNCHER BREAKER.
I'm getting one next week:)
Always thought the Breaker was a bit on the loud side,good to know that theres better silencing options,I have 3 different types of silencer I can use,all 1/2 UNF thread,a TKO,good quality,works well but around $90,a Bwalton LDC,works fine,quality not quite as good but around $65 and a Wolf silencer,finish is good and around $55 but not quite as quiet as the other 2.
There is silencer options out there in the U.S,just have to do a bit of searching.
check this at annihilatorairgunsandtuning.com at 35 dollars
I need to ask you a question ...have you had any problems with your karl puncher ??? cuz im thinking of getting one .. awesome video great information ty
I didn't have any problems with it. Also i think they came out with a version 2.
Ive got same ting , really good gun ,
why not just get 3 baffles from a marauder and the spring
Great video yet again, my question do the sub-presser effect the accuracy?
None. Shoots same. Will do 50 plus yards video soon.
Great I am looking forward to it.
Do you know how many shots per fill you would get with this on low power? The lowest of low, the measly 300fps lol.
100 atleast. Prob more
TexasAirGunner ty
Hello. kindly, could you give me the measurements of the steady at 8.. height, diameter of the 2 circles, width (thickness..) and of the silencer.. diameter and length.. In Italy and Europe I can't find those 2 pieces.. so I thought I'd get them done.. if they don't cost a fortune.. Thanks so much!!!
I dont have the rifle anymore. U can get the silencer from wolf airguns. They are in Europe
Wolf not have this parts.. 😭
Can you tell me what the rifling twist is on the Kral .22? I'm must wondering because you seem to indicate that when you shoot the heavier pellets, they start to destabilize beyond a certain distance.
TIM MONTANO I have no clue. Have to get on the kral website
You say you make the Shroud were do i let you know i would like one/ is there a place listed here on your you tube sight?
Airgunwear.fun
Can anybody tell me if a hand pump will work with this gun? I plan on mostly for pest control.
Yes it will work. If u plan on shooting a lot an air tank is what u will need.
@@TexasAirGunner thanks for quick response as I am shopping now. I just spoke with rep from a company who said it would be possible but take 100+ strokes and last 50 would be very difficult. Thoughts? Can you recommend a good pump under 200 if that's possible . Thanks
@@steveo5867 i haven't used a pump but once and it was a couple years ago. Dont know much about them. Gonna find a link to what u need
www.avantlink.com/click.php?tt=cl&merchant_id=97338a88-d4bb-4c59-a4b9-32eba2511bd2&website_id=e8602c69-5769-409a-a7a7-59a4f51c33d8&url=https%3A%2F%2Fwww.airgundepot.com%2Fair-venturi-scuba-tank-k-valve.html
www.avantlink.com/click.php?tt=cl&merchant_id=97338a88-d4bb-4c59-a4b9-32eba2511bd2&website_id=e8602c69-5769-409a-a7a7-59a4f51c33d8&url=https%3A%2F%2Fwww.airgundepot.com%2Fair-venturi-scuba-tank-yoke-k-valve-adapter-hose.html
So nice mod where do you get moderators from, i am assuming this is the whole idea but don't see a link to buy silencers
I dont have a link for them. I get them for $100. They come from overseas and take about 2-3 weeks...
@@TexasAirGunner how do you find them overseas? Do you Google it or what? Thanks
@@rickrazz7136 airgunwear.fun and u can buy one
hello. after watching this video, I attempted to remove the shroud off of mine. I found the set screw on the side and I remove it. the shroud slides up several inches then stops. what am I missing? thanks
Steve Zamarripa the shroud comes off just by unscrewing it. the air gauge end cap unthreads and the fill probe cover just slides off. the barrel and air cylinder mount just has 2 allen screws on each side. remove those then slide off. the shroud just might feel stuck. Just pull it. remove shroud first
How's the accuracy with the moderator on? How many fills would I get with a 80cf 3000 psi tank?
If u fill it to 3300 psi u will get about 4 or 5 full fills to 200bar and about 10 to 190 and about 20 to 180 and less and less. So about 30-40 fills to 180bar. Ull have to get a 60min scba 4500psi tank to get about 40 to 50 or maybe more full 200bar fills. I get 30+ full fills with my tank at 230 bar on the streamline. Then it starts to drop. About 60 with the kral
Accuracy is great with moderator. Doesn't change or even better
What kind of moderator is that you're using?
lsachez581 they are no name brand ones but work great.
Do you have a video demonstration on the trigger spring you took out?
No I dont. I believe, if I remember right, when u remove the stock there is a spring in the rear of the bar that u can take out....
@@TexasAirGunner the little one on the trigger rod like in the middle? I don't have the gun yet to see how it looks but I see it on yours
@@covarrubias736 yeah...
@@TexasAirGunner do I just take it off completely? Does it do anything?
@@covarrubias736 I just took mine off. It reduced my trigger pull a lot...
What's the brand and where you can get the moderator?
Theyre not branded. Airgunwear.fun to buy one
Do you use the stock shroud at all anymore?
No.
TexasAirGunner could i buy the stock shroud end cap from u???
randy job I'm selling the complete setup
TexasAirGunner oh ok
Nice video I appreciate your honesty but I am right there with you I have got to Benjamin Marauder airguns a 22 and a 25 caliber and I have a daystate Regal 22 caliber air gun and there is no comparisons to the to I guess you get what you pay for and I really wouldn't want to buy a puncher breaker do the fact that it's heavy the trigger is not as good and for me to buy a gun like that would be going backwards compared to the daystate Regal because if they ever made a air gun that was perfect that gone there is about as close as you're going to get the only other gun that I could even compare to that style of God that is more like a real gun and doesn't have a great big tube and weight in pounds would be the FX streamline rifle because I know they both have great triggers and that's the bottom line to any air gun any rifle any crossbow if it has a really good trigger you will be able to shoot it really well but I have got that beautiful daystate Regal with the Walnut stock that is just gorgeous my buddies look at it and they cannot believe how beautiful that none is and I bought that it airguns of Arizona when they had it on sale for $999 come with the silencer on the end at a full fill you can get around 50 really good shots without a regulator in it it has the Harper Patton slingshot system and the titanium valve and the gun is light like the Streamline just a little over six pounds nicest gun that I have ever shot nicest gun that I have ever owned so if I bought the puncher breaker I would feel like I was going backwards but great video and keep up the good work I love watching them
I hear u totally. i bought the gun specifically for testing and reviewing. it did better then I thought for price. completely satisfied with the kral products. great product for the money
Hey TAG how much for the full length moderator?
T and T Air gunning $100
TexasAirGunner how long for delivery and I think you mentioned the company is over seas?
T and T Air gunning about 3 weeks to me and I'll strip and repaint it and ship to u. where u located? no more then 4 weeks usually total.
TexasAirGunner Arizona
TexasAirGunner ok how many baffles are there internally on the full length moderator?
Hey man as soon as I removed the shroud my pb shot terrible groups. Anyone else had this problem
I didnt have that prob. Make sure the whole barrel stayed secured. The shroud shouldnt affect accuracy. Also check the crown of the barrel and make sure its good...
The. Name. Suppressor
STOP CALLING IT A SILENCER!
It's a Lead Duster Catcher (LDC)
get a quiet kit from Annihilator airgunsandtuning.com is only 35 bucks and work better
rafael rodriguez no baffles or anything u can do to the tube is better then these real silencers. Reduce the noise on high power to sound like low power setting.
Mine is a Troy tuned gun and the quiet kit doesn't impress me. This dude knows what he's talking about. I'll sell you another quiet kit and shroud if you want. lol