Solidworks Sheet Metal Elbow

[@carlosmaffessoni4638]

An important lecture for sheet metal basic understanding, I enjoy very much and request more piping and sheet metal videos, thank you!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, i will try more for piping and Sheet metal,

[@valentinlishkov9540]

ua-cam.com/video/G8TssQyyRMk/v-deo.html
wmlwdp.com

[@valentinlishkov9540]

ua-cam.com/video/G8TssQyyRMk/v-deo.html
wmlwdp.com

[@valentinlishkov9540]

wmlwdp.com
ua-cam.com/video/G8TssQyyRMk/v-deo.html
ua-cam.com/video/MDQ-AhwxKIY/v-deo.html
ua-cam.com/video/Jkb8Fgn8cgc/v-deo.html
ua-cam.com/video/y9UGmCy5Xi0/v-deo.html
ua-cam.com/video/ekX63YVW9Yk/v-deo.html

[@acewelding]

If you evaluate the assembly for interference you find that the parts overlap. Therefore the more sections you use in the assembly, the more out of square it will be when welded. At 7:28 you can see that all of your parts are fixed, if you float the parts and remate them with a realistic none interference you no longer have a 90 degree elbow. Could be to do with the split feature adding material for the flat pattern, I'm not sure as this is the first time I've used this feature.

[@emiellambrecht3663]

Retired over 10 years but still learning... thx for the clear explanations.
I prefer to use equal angles to avoid non symmetrical parts.

[@elversantos6050]

Justo lo que necesitaba. ¡Muchas gracias!. Saludos desde Colombia.

[@fernandocarneiro7734]

Congrats! You make this appear easy ! Thanks for sharing your knowledge!

[@CADCAMTUTORIALBYMAHTABALAM]

thanks

[@Mariogachuz]

Muy buena explicación de como utilizar el sheet metal en solidworks, gracias.

[@feysbukoglu]

thank you so much from turkey. :)

[@robinstefanov5152]

Thank you, very helpful video !

[@TheZisco]

Really nice video , easy to understand. Really helpfull 😉

[@klimbani1183]

Thank you sir, this helped me alot.

[@maherdaibes9344]

thanks man you help us a lot

[@mohithachar7461]

THANKS, YOU MADE IT EASY.

[@MrSnuppys]

Many thanks. Very helpful

[@IenjoyDe]

Very, very, very helpful. I really thank you. You are the master ;-)

[@CADCAMTUTORIALBYMAHTABALAM]

thanks.

[@TamimRahmanIndian]

5:35 in my pc split option is in grey...unable to use this feature...what should i do? plz explain

[@CleaveMountaineering]

Just what I needed, thanks

[@ermdallauddinansari1948]

Super PROJECT learn BEGINNERS sir

[@hk-almed]

Thank you teacher.

[@야사이-m5h]

Thank you very much for your kind elbow production lesson.

[@CADCAMTUTORIALBYMAHTABALAM]

you are the most welcome,

[@joanfaz4653]

thanks a lot .. for this video,, its perfect for beginers . sorry, when you select a body its a nice blue special.. how you change the colors of the selection tool.... thanks in advance Joan

[@dettwostroke9974]

Hi..sir can you make tutorial on how to draw 2 stroke exhaust pipe using solidworks?

[@مهديالحديدي-ض8ق]

Thank you so much 😙😙😙😙😙😙😙😙😙😙😙

[@vishnucodeno47]

Which software and version your using?

[@raulalbertochavezromero4829]

Nice work dude!.. I had to design the cuts in a schedule 40 pipe, and you heldped too much... :D

[@MrJohanh80]

thanks, but do you know how to do it with external references ?

[@rafoug]

why you selection glow like this in blue? and how you do that?? Nice video btw

[@CADCAMTUTORIALBYMAHTABALAM]

Rafou G For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.

[@rafoug]

I have real view but I like only the glow selection, it's not possible to stay normal view with glow selection?

[@1234swak]

thanks it was help full . just starting with solidworks need to under stand the commend and how to use it , can u help please?

[@CllAslnr]

Çok teşekkürler (Thank you very much)

[@CADCAMTUTORIALBYMAHTABALAM]

you are the most welcome,

[@John.santos]

how to do this if the A diameter is different of the B diameter of the circle? Always get a non-linear edge error.
Ex Straight Tube 30mm to 60mm (cone shaped)

[@secretmillionaire7698]

Awesome..Can please help me out to give the additional detail about the pattern thanks.

[@alasdairgeddes]

this is probably the most long-winded way that you could make a sheet metal part

[@CADCAMTUTORIALBYMAHTABALAM]

i am shows here a way of doing the task,

[@Luka-gk5gf]

Hello I have one problem i can't flaten the parts( can't add bands(edge) ) If you nou what is problem?
Thank you.

[@CADCAMTUTORIALBYMAHTABALAM]

restart to build and follow the steps.

[@nguruvijith2824]

I have a doubt...???
At first the thickness was 8mm
When converting to sheet metal u have given the radius as 5mm...
For a 8mm thickness material sheet metal...
The inner radius must also be same as the thickness na...
If not... will it not create problems in bending or rolling...
Kindly explain...

[@Bboy8989]

Thank you!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching

[@omranalyasin7279]

thank you very much

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching i hope you enjoyed.

[@htor10]

When I am going to insert a bend to one of the bodies, it gives me error and I can not continue with the flatten. How is this resolved?

[@CADCAMTUTORIALBYMAHTABALAM]

please mention time where you feel problems,

[@akibshaikh4675]

HOW TO MAKE THIS KIND OF BEND BUT BOTH CROSS SECTION ARE DIFFERENT. LIKE ONE SIDE ROUND AND SECOND IS RECTANGLE

[@bibhuprasadsahoo2453]

Hello Sir, There is a problem, when i choose the path it shows open group. How it will be resolved? Help me

[@CADCAMTUTORIALBYMAHTABALAM]

mention time,

[@bibhuprasadsahoo2453]

At the time of swept boss/ base

[@teera5891]

ขอบคุณครับ (TH)

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching.

[@fate.mir.6890]

VERY LIKE

[@khaledsaad2602]

Thank you

[@ኒቆዲሞስወልድ]

thanks

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching.

[@belengineering5393]

Многогранник ?? - не, не слышали, Разрыв?! - никогда не применять!
Короче результата он добился но методы...обнять и плакать, и простить.

[@htor10]

minute 7:46.

[@CADCAMTUTORIALBYMAHTABALAM]

check previous all relation are perfect and here select outer age of any side,

[@Luka_WiFi]

ოქრო!

[@mrwagnermail6289]

you will never do this in real life. one of the reasons never make cross welds

[@مييناحمر]

Thank you so much