my archer c20 v4 don't have the range extender mode. what's the version of your c20? Do you know how to enable the Ranger Extender mode to an Archer C20? If positive, which firmware version? Thank You!
@@4RealMoves may be your router is with old hardware version. range extender comes with latest model. use WDS opton to use repeater if available inside Wireless settings
I am unable to find the Operation Mode wherein I have to select the range extender option. I am trying to setup this tplink C20 Archer as wifi extender for Jio Fiber. Could you kindly advise.
In the older hardware version no Operation mode option but you can use this method to setup as range extender--wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
@@TechTricksZone I am getting "Connecting AP channel is 11, which is different from configured AP channel. Please confirm channel settings." message Anyway I can fix this?
can we connect to internet using ethernet cable (LAN port) from the router(the one you connected to configure)....when the router is in repeater mode? Asking this for desktop systems. Please let me know this at the earliest.
Can't understand what you did? Are you using Ac20 router as a main router or repeater? I have setup my Ac20 router as a main router on 2nd floor, i want to extend the coverage to 1st floor, what can i do for it? Should i use any repeater for it of router? Please help
@@wordpress_web_designer you can setup ac20 as AP router mode . techtrickszone.com/2018/05/20/tp-link-ac750-archer-20-dual-band-router-setup-first-time/
Hi I tried and range extender is working, but when I use LAN cable from repeater there is no internet access. Is it possible to use LAN cable connection from repeater to computer?
@@TechTricksZone I used the method from this link wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/ is it possible to upgrade router software to match your video?
I did everything you said. Kept getting "No internet" message. So I changed my 5Ghz connect option to "no security". That worked but now the IP page can't be accessed. Keeps timing out. "took too long to respond". Help?
My PC tells me it's the right address. tplinklinkwifi.net gives the generic "Trying to configure the router?" message. I tried different browsers, cleared cache, nothing is working.
change c20 ip address to same series ip addeess of your internet router and then setup in range extender mode. Exp - your internet router ip 192.168.1.1. than gice 192.168.1.100 for c20. and then setup extender mode
@@TechTricksZone I tried this on mine since I was getting a similar issue. Issue still persists but I ended up changing the Gateway to the main routers IP and it connected but with limited functionality. I can't go use google I can only use teamviewer and anydesk. Weird
My android TV gets disconnected when connected to the same range extender wifi. Issue didn't happen when TV was connected to main wifi. Why is it so? My other devices never gets disconnected when connected to this range extender wifi
I have done until configuring the extender with main ap..and the remaining is setting up ssid and password for the repeater.., but now when I go to that IP address, it shows nothing. You told to use 192.168.0.1 if using for the first time,, what to use next times?
when you make tp-link as repeater DHCP will auto disabled so if you want to login repeater device again. go to PC/laptop LAN settings and use static IP 192.168..0.10 and than try access 192.168.0.1
Hallo my friend i need HELP I HAVE THIS MODEL C20 TPLINK I NEED TO KHNOW HOW TO CONNECT TO MY WIFI DISH CPE605 ITS BROADCASTING ONLY 5GHZ WIFI I WANT THE ROUTER TO CONNECT TO IT
I have 2 same c20 router. When i put 192.168.0.1 it shows me the page of wifi which is already set up as main router. I want it to show the new router which i want to use as extender. Help pls
Is it possible to use the 2.4 band as a "wireless client" to another SSID in let's say 192.168.0.0 network, and the 5 Ghz band has it's own network let's say 192.168.1.0 and let the 5 Ghz client connect to internet through 2.4? It just like the WAN port, but instead using cable, it's the 2.4 act as the uplink line.
@@TechTricksZone something like that yes, but instead the "repeating", routing seems to be correct terms, as the client connect to the dual band router will connect through 5 Ghz band in different network from main router.
For example, say I have wifi router A (2.4 GHz) with SSID "WIFI A" on 192.168.0.0 network which provide internet connection through the WAN port. Then I have another wifi router B (Archer C20 dual band 2.4 and 5 GHz). On this router B, I will provide wifi connection to devices (laptop and cellphone) ONLY on 5 GHz band with SSID called "WIFI B" on 192.168.1.0 network (different network from WIFI A). I intend to use the 2.4 GHz as a "client" to connect to WIFI A thus provide routing from 192.168.1.0 network to connect to internet through 192.168.0.0 network.
@@TechTricksZone oh tq jii then i have a doubt?? Some other people told me need modem to connecting router... Really need another modem /Ethernet cable??
@@srisadvice7802 If your internet connection is broadband and connected with telephone line than you need modem , if your interent connection connected with cat6 cable from your internet provider then you no need any modem
@@TechTricksZone oh ok it's not telephone land line net connection. Here we have orange fiber net available..with monthly plan i choose that orange connection. Just today placed order for tplink dual band router jii... Thank you for your quick response😊💐
@@srisadvice7802 for fiber you no need modem. your internet provider will installed a ONT device so you can connect ONT ethernet port to TP-link WAN port. get tutorials- techtrickszone.com/2018/05/20/tp-link-ac750-archer-20-dual-band-router-setup-first-time/
Ada mode cliennya gak mas? Umpama kita nembak WiFi.id dari bandwit sumbernya 20Mbps kl kita Nerima ya pakai frekuensi 2.4Ghz umpama masuk di router bisa 16Mbps, apakah kl di frekuensi 5Ghz bisa full 20Mbps mas
Hi thanks for the tutorial, do you know if it is possible to extend a 5Ghz network? I want to extend that, is it possible using this router? Option : Wireless 5GHz, then connect to network, are you able to see and extend the network of some 5GHz source? :) thanks in advance.
My main wifi name is not showing where you selected to connect extender help My wifi is working fine but not showing in the extender settings no matter how many time i refresh
@@ognjenpejovic8673this version not support range extender mode but you can use WDS mode to use as repeater. see the TP-link configuration part in this tutorial and follow same for your C20 techtrickszone.com/2018/07/22/binatone-dt850-adsl2-wifi-router-as-repeater-mode-configuration/
Hi friend, Does this router Archer C20 V5 support DFS function (Dynamic Frequency Selection)? i.e., is it able to operate with 5GHz Wi-Fi channels nº 52-64 & 100-144?
range extender mode will usue to extend signal range . if your user will increase in wifi then your internet will slow down if user will same in range extender as before then your internet will not slow down. depend on the user load
Did not have to use an ethernet cable (did not have one), the wireless setup also works. The steps are clear and accurate. Thank you!
how?
Thanks for your valued efforts, Something was missing from this video is to disable DHCP prior to use the internet👍
Don’t have this head Operating Mode in my menu…..how to tackle this situation now…need ur guidance please
hi sir i have the same router with you why idont see the operation mode
Same
same
my archer c20 v4 don't have the range extender mode. what's the version of your c20?
Do you know how to enable the Ranger Extender mode to an Archer C20?
If positive, which firmware version?
Thank You!
Firmware Version:0.9.1 4.16 v0001.0 Build 181226 Rel.556n
Hardware Version:Archer C20 v5 00000005
TechTricks Zone and for the v4 version there’s a way to enable range extender mode? (not wds feature on router mode)
@@rodrigodefreitasandrade242 Try upgrade latest version from TP-link official site. and test if range extender mode available in latest version
My firmware is up to date but doesn’t exist this mode i did it as wds mode
@@4RealMoves may be your router is with old hardware version. range extender comes with latest model. use WDS opton to use repeater if available inside Wireless settings
Which operation should i choose if the main router is in the other house and i want to have my tp link the same speed it has using wired connection
I don't want to change the SSID will it work without changing
actual video start 1:40
Was tp link the first router or the second (repeater)
TPlink c20 is the second repeater mode
Thanks a lot, your video is more helpful than the damn manual
I am unable to find the Operation Mode wherein I have to select the range extender option. I am trying to setup this tplink C20 Archer as wifi extender for Jio Fiber. Could you kindly advise.
In the older hardware version no Operation mode option but you can use this method to setup as range extender--wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
@@TechTricksZone I am getting "Connecting AP channel is 11, which is different from configured AP channel. Please confirm channel settings." message Anyway I can fix this?
@@jayarajbalachandran Range extener will auto change Channel number to same channel as configured on your main wifi router.
@@TechTricksZone for some reason it didn't so I manually changed it and it worked. Thank you for your help
can we connect to internet using ethernet cable (LAN port) from the router(the one you connected to configure)....when the router is in repeater mode? Asking this for desktop systems. Please let me know this at the earliest.
Yes you can use LAN cable to connect internet from repeater lan port to Desktop or anyother network device such as printer, NVR , DVR
thanks buddy! great work. worked like a charm
Range kitna miter hoga.device kitna hai.
Pretty useful my friend ❤
Can't understand what you did?
Are you using Ac20 router as a main router or repeater?
I have setup my Ac20 router as a main router on 2nd floor, i want to extend the coverage to 1st floor, what can i do for it?
Should i use any repeater for it of router?
Please help
i am suing c20 router as range extender.
@@TechTricksZone can this router use as extender and router in same time?
@@wordpress_web_designer did not understand. can you explain what you looking to do with c20 router
@@TechTricksZone i want to use this Ac20 as a main router and also extender
@@wordpress_web_designer you can setup ac20 as AP router mode . techtrickszone.com/2018/05/20/tp-link-ac750-archer-20-dual-band-router-setup-first-time/
Bhai i have archer c20 v4 router and isme range extender mode nhi hai and Dhcp by default enabled hai disable nhi ho rha kya karu .?
can i also connect 5ghz ? or instead 5gz?
yes you can if your Main internet router support 5GHz band
Setup the operation mode to range extender but I don't have connect to a network option under 2.5 or 5 ghz options
can share printshot of settings you want to tell
Hi I tried and range extender is working, but when I use LAN cable from repeater there is no internet access. Is it possible to use LAN cable connection from repeater to computer?
LAN should work.
@@TechTricksZone I used the method from this link wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
is it possible to upgrade router software to match your video?
@@TheBlues34you can find firmware supported for your hardware version from TP-link site
Actually good
By using archer c20 as an extender will it slow down my internet speed?
I have the same problem
I dont need to set up a 5.8GHZ if my main router only supports 2.4GHZ right?
for repeater connection use 2.4G but to extend network you can setup 5Ghz as repeater ssid
TechTricks Zone how?
can i change my host 5.08 ghz to 2.4 in repeater . please reply
YEs if your main router also suport 2.4 Ghz. you can use any band for repeater
I did everything you said. Kept getting "No internet" message. So I changed my 5Ghz connect option to "no security". That worked but now the IP page can't be accessed. Keeps timing out. "took too long to respond". Help?
My PC tells me it's the right address. tplinklinkwifi.net gives the generic "Trying to configure the router?" message. I tried different browsers, cleared cache, nothing is working.
change c20 ip address to same series ip addeess of your internet router and then setup in range extender mode. Exp - your internet router ip 192.168.1.1. than gice 192.168.1.100 for c20. and then setup extender mode
@@TechTricksZone I tried this on mine since I was getting a similar issue. Issue still persists but I ended up changing the Gateway to the main routers IP and it connected but with limited functionality. I can't go use google I can only use teamviewer and anydesk. Weird
Very helpful, thanks man
Thanks for the video, however I did it, still internet doesn't work :(
Did the internet worked?
When i connect to my main router it says dns server not responding but if i connect to the repeater the wifi works did i do somthing wrong?
Login your main wifi router and add DNS manually to LAN option.
What are the advantages of this? Will it impact my internet speed?
Yes, the internet speed will be improved by 2x to 10x, at least.
My android TV gets disconnected when connected to the same range extender wifi. Issue didn't happen when TV was connected to main wifi. Why is it so? My other devices never gets disconnected when connected to this range extender wifi
Mine doesn't have that Operation Mode option.
I have done until configuring the extender with main ap..and the remaining is setting up ssid and password for the repeater.., but now when I go to that IP address, it shows nothing.
You told to use 192.168.0.1 if using for the first time,, what to use next times?
when you make tp-link as repeater DHCP will auto disabled so if you want to login repeater device again. go to PC/laptop LAN settings and use static IP 192.168..0.10 and than try access 192.168.0.1
@@TechTricksZone Okay..thanks
@@rubeenaabdulkhader7074 Welcome please do not forget to subscribe
DHCP Disable ?
Yes in Range extender mode dhcp disabled
@@TechTricksZone Thanks & ip address ?
two router ip same or different ?
@@shakilahamed3098 same sries but ip different. Exp- if your wifi router ip 192.168.1.1 use 192.168.1.10 in range extendder
Thank you so much
Welcome- also bookmark blog- techtrickszone.com to get more tutorials
@@TechTricksZone By using archer c20 as an extender will it slow down my internet speed?
@@TechTricksZone please reply me sir please
Hallo my friend i need HELP
I HAVE THIS MODEL C20 TPLINK
I NEED TO KHNOW HOW TO CONNECT TO MY WIFI DISH CPE605 ITS BROADCASTING ONLY 5GHZ WIFI I WANT THE ROUTER TO CONNECT TO IT
you can use 5Ghz cnnected from C20
I have 2 same c20 router. When i put 192.168.0.1 it shows me the page of wifi which is already set up as main router. I want it to show the new router which i want to use as extender. Help pls
disbale wifi . connect lan cable to C20 lan port you want to setup as range extender and change IP address first and then setup as exxtender mode
Is it possible to use the 2.4 band as a "wireless client" to another SSID in let's say 192.168.0.0 network, and the 5 Ghz band has it's own network let's say 192.168.1.0 and let the 5 Ghz client connect to internet through 2.4? It just like the WAN port, but instead using cable, it's the 2.4 act as the uplink line.
You mean use 2.4 as Repeater to get internet from main router or 5G for WiFi ?
@@TechTricksZone something like that yes, but instead the "repeating", routing seems to be correct terms, as the client connect to the dual band router will connect through 5 Ghz band in different network from main router.
For example, say I have wifi router A (2.4 GHz) with SSID "WIFI A" on 192.168.0.0 network which provide internet connection through the WAN port. Then I have another wifi router B (Archer C20 dual band 2.4 and 5 GHz). On this router B, I will provide wifi connection to devices (laptop and cellphone) ONLY on 5 GHz band with SSID called "WIFI B" on 192.168.1.0 network (different network from WIFI A). I intend to use the 2.4 GHz as a "client" to connect to WIFI A thus provide routing from 192.168.1.0 network to connect to internet through 192.168.0.0 network.
How to install and use without having laptop and system for mobiles??
use TP-link apps and setup with apps
@@TechTricksZone oh tq jii then i have a doubt?? Some other people told me need modem to connecting router... Really need another modem /Ethernet cable??
@@srisadvice7802 If your internet connection is broadband and connected with telephone line than you need modem , if your interent connection connected with cat6 cable from your internet provider then you no need any modem
@@TechTricksZone oh ok it's not telephone land line net connection. Here we have orange fiber net available..with monthly plan i choose that orange connection. Just today placed order for tplink dual band router jii... Thank you for your quick response😊💐
@@srisadvice7802 for fiber you no need modem. your internet provider will installed a ONT device so you can connect ONT ethernet port to TP-link WAN port. get tutorials- techtrickszone.com/2018/05/20/tp-link-ac750-archer-20-dual-band-router-setup-first-time/
Ada mode cliennya gak mas? Umpama kita nembak WiFi.id dari bandwit sumbernya 20Mbps kl kita Nerima ya pakai frekuensi 2.4Ghz umpama masuk di router bisa 16Mbps, apakah kl di frekuensi 5Ghz bisa full 20Mbps mas
Gae bahasa engres kang, wonge ndk ngerti
How get range extender feature in my tplink router Archer c20 not shown in quick setup
Try upgrade firmware and check
How do I update the firmware?
@@visheshparyani5582 follow this guide- techtrickszone.com/2019/06/15/tp-link-wifi-router-firmware-upgrade/
Quick setup baad jo operational mode bah mere me nahi aa raha h
Hi thanks for the tutorial, do you know if it is possible to extend a 5Ghz network? I want to extend that, is it possible using this router? Option : Wireless 5GHz, then connect to network, are you able to see and extend the network of some 5GHz source? :) thanks in advance.
I was going to ask the same, does anybody know if it is possible to use a 5Ghz network as source?
@@SnakeZeke i also have same question. Do you found any answer? If so please reply.
@@RajeevKuSharma I did confirm it by myself, and yes you can use 5Ghz as source but it is unstable...
@@SnakeZeke thanks, thanks alot.
@@RajeevKuSharma no problem :)
My main wifi name is not showing where you selected to connect extender help
My wifi is working fine but not showing in the extender settings no matter how many time i refresh
Same here
Did u get any solution?
@TechTricks Zone Can you provide the firmware and the hardware version of the device please
you can check your router firmware and hardware version on status page or firmware upgrade option
my archer c20 does not show the operation mode do i need to update firmware?
Yes try update if still not show operation comments here so we can suggest other method
@@TechTricksZone now it's showing after firmware update
@@BlessonGeorge Greate you can setup not - techtrickszone.com/2019/07/22/ac750-archer-c20-range-extender-mode-setup/
What if i cant find the option for wifi extender ..?
see the firmware version or try upgrading if any latest firmware available
Yeah . I upgraded to the latest firmware .. but still the same .. the options are accespoint and wireless router only
@@ralphromeoopena3951 what is router version showing?
Archer C20(EU)_V4_181213 thats 's my router version
@@ralphromeoopena3951 Try this method - mikrotrik.com/tp-link-ac1750-range-extender-mode/
I did it but it says no internett acsess.
please check you use correct wifi password and security type
I dont have in operation mode range extender? why?
you may using older model or you can try upgrade firmware to get operation mode
@@TechTricksZone give me the link please for the file for update firmware.
@@TechTricksZone my version model is v4
@@ognjenpejovic8673this version not support range extender mode but you can use WDS mode to use as repeater. see the TP-link configuration part in this tutorial and follow same for your C20
techtrickszone.com/2018/07/22/binatone-dt850-adsl2-wifi-router-as-repeater-mode-configuration/
@@TechTricksZone can you help me with teamviewer?
Tp link C24 ka bhai banavo na video
This video is C20
Tp link C24
@@mayurmahadeshwar2480 router mode- techtrickszone.com/login-tp-link-archer-c24-ac750/
I did this and operation mode is not present
Try this mthod- wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
Bhai cursor edhar udhar ghumake confused karne kya jarurat hai. Mahabharat likha hua kuch samajh nahi aaya tera.
wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
mine doesnt have this opetion !?
Try this method if range extender mode not available -wifirepeater.org/tp-link-archer-c20-v4-repeater-mode/
@@TechTricksZone Thank you !. I found for the version I had I need to enable WDS!
@@chefboyrdee1 Yes Correct!
Hi friend,
Does this router Archer C20 V5 support DFS function (Dynamic Frequency Selection)?
i.e., is it able to operate with 5GHz Wi-Fi channels nº 52-64 & 100-144?
Auto option available for frequency selection but there is no specific DFS option to enable disble
@@TechTricksZone So, can you select manually the 5GHz Wi-Fi channel between 52-64 & 100-144?
Someone please reply me.... Reply me sir
range extender mode will usue to extend signal range . if your user will increase in wifi then your internet will slow down if user will same in range extender as before then your internet will not slow down. depend on the user load
@@TechTricksZone thank you
Give me this router wps pin please
Kuch bhi bata raha
Reply me pls
Thanks for your valued efforts, Something was missing from this video is to disable DHCP prior to use the internet👍
Thank you so much