Your printer postage hack is so much easier than tracing paper and rubber glue. I am so glad I came across this video and thank you for the template!!!!
I just wanted to show different ways to make some simple bails and I also made a free template to help everyone out, so here you go bit.ly/BailSizeTemplate Big thanks to Ridge for sending me this wallet and supporting the channel! Here’s the site if you want to check them out. bit.ly/RidgeWallet-GomeowCreations Use Code “GOMEOW” for 10% off your order! 😁👍 Metal Hand Shears - amzn.to/2KN7uYG Copper Sheet (Various Sizes) - bit.ly/CopperSheets Premium Bench Block 6" x 6" - bit.ly/PremiumBenchBlock Haymaker Saw Frame - bit.ly/HaymakerSawFrame NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades Gauge Thickness Tool - amzn.to/3aQkZkQ Chain Nose Jaw Parallel Pliers - amzn.to/38JlFFX Round Nose Pliers - amzn.to/3rAoe62 Bail-Making Pliers - amzn.to/3o0sfOM Rawhide Mallet - amzn.to/3hpJ96Z GRS Tools Bench Pin Kit - G04-556 - amzn.to/2WHpzcV GRS Tools 004-557 Fixed Mounting Plate - amzn.to/3nQT3B6 If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date: GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes *If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel* ---------------------------------------------------------------------------------------------------------- If you would like to directly support the channel you can do so in a few different ways. 1. Like, comment and share my videos 2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations 3. You can sign up a monthly donation via my patreon for as little as $1 per month www.patreon.com/GomeowCreations 4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month www.subscribestar.com/gomeowcreations 5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making. #bailmaking #bail #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
So excited for this video. I'm fairly new to metal smithing and have been making some pendants that need bails. I would prefer to make them rather than buy them. I would love to see your setup in soldering the ends while attached to a jewelry piece. Thanks!
I will do that at some point but if you do that add them before I do that, make sure you don't have your stones set in the piece as you do this seeing that they heat will destroy your stone. Also use a third hand to hold it so you don't solder it to the pendant if you are doing a free floating one
Awesome mate thanks very much for the free template! Just about to try making some and this and your video will come in real handy. Will save this video so I can come back and use your saw link. Hope you get something for it. Thanks again!
Perfect timing! I really need to move on from using multiple jump rings and make something a little more substantial for my necklaces. I like the look of multiple rings but sometimes a piece calls for more. Especially medium to large pendants. And the template is awesome, thank you! Already printed and will be using it.
I enjoy watching your videos. I was wonder how you like the shears you use in this video. I have been looking for a good set. Please provide a link to the shears you recommend. I have looked on your website with no luck.
Hello, I just found your channel and find it incredibly helpful. I have a question if you wouldn't mind helping me. I want to make a ring for a friend with a sunflower on it that I plan to make out of brass. I want the band itself to be disconnected and not form a solid ring to that on one end is the flower and on the other is a bee that looks like it's flying towards the flower. What thickness of metal should I use for the band so it's not too weak or easily bent? Thank you in advance for any insight you can provide me
first of all thank you for your advice which is very useful to me. but I would like to know about this jewelry, is it black and red resin between the metal? thank you
Thanks for the video. I tried downloading the template and no luck yet. Do you consider the attachments at the ends of the chain and size of the bail so you pendants don't slide off the chain and get damaged. In the UK if you can't easily remove the pendant from the chain then both pendant and chain are considered one item and so could easily slip over the 7.2 gm silver limit, making the expense of hallmarking necessary.Anyways great video.
This is the main file I use amzn.to/37ZYiZF and the small ones can be found here amzn.to/2WWvvPs as for the pliers, I don't know what ones you are talking about but I think I have links to all of them in the description of the video.
I used these bit.ly/NANOSawBlades When it come to size it really depends on the metal you are cutting my I use 2/0 and 3/0 for most of my work. I use size 5 on things like casting sprues.
@@GomeowCreations Thank you, I just ordered one to cut silver castings from the sprue and it was a Amazon cheapie so I know the blades are probably junk and want good blades. I will use your link.
Hey. I know this is off topic but how can I dispose if pickle made from vinegar and salt? I've looked up videos and it's usually the ones with chemicals.
This video will help you with this ua-cam.com/video/1mPAXsKXb1Q/v-deo.html For the most part it will not matter what your pickle is made of, it is the copper that is in it that is the problem. Copper suspended in a liquid is the hazardous material. If you just let it all dry out you can just throw it away seeing that it would just be salt and copper but watch the video for more info.
I am so curious how you look like! You have such a pleasant voice so would be nice to have a face to it. By the way, what kind if file do you use? Vantage to buy one too!
Thank you so much for the templates they are going to be very helpful! I have been watching your videos for over a year now and I love them I just was wondering if youtube and your jewelry making are now your only sources of income? I know you have mentioned you work on cars and computers are you still doing that?
So I work on my own cars and computers in my free time to keep them working or updated. I don't make any money doing that haha. I do make a full income now from my UA-cam channel along with my jewelry. I'm also using my editing a videos skills to make some money on the side as well. 😁
@@GomeowCreations that's awesome! It's great to hear that too your videos have demystified jewelry making for me and I'm working on getting started myself. Thank you so much for the videos. It's really great to have someone like you out there who is down to earth and who's willing to share what you have learned.
All idols and images of God need to be made only with refreshed faces and redesigned! From 2022, there will be only one face of God for all caste and religion idols (commandment)! Woe to all disobedient creatures!
I like your work very much, but I accidentally saw your fingers and nails are darker red. Is this caused by paint or some chemical substance? If it comes from the body spontaneously, please pay attention to your health and find out the cause
Thank you for your concern but this is not a problem, see when I shoot my videos it adds a lot of contrast the the recordings. They makes things pop more than in real life. I should fix this color problem by color grading the video but that take a lot more time so I just don't do it. If I look at my nails right now that are just a pinkish tone like my skill. 😅
Your printer postage hack is so much easier than tracing paper and rubber glue. I am so glad I came across this video and thank you for the template!!!!
Oh yeah it saves a lot of time. You can also use a normal printer and glue stick to do this as well.
wow just look at all those sparkly new tools. Someone went shoppin.
Upgrades for the new year 👍
I just wanted to show different ways to make some simple bails and I also made a free template to help everyone out, so here you go bit.ly/BailSizeTemplate
Big thanks to Ridge for sending me this wallet and supporting the channel! Here’s the site if you want to check them out. bit.ly/RidgeWallet-GomeowCreations Use Code “GOMEOW” for 10% off your order! 😁👍
Metal Hand Shears - amzn.to/2KN7uYG
Copper Sheet (Various Sizes) - bit.ly/CopperSheets
Premium Bench Block 6" x 6" - bit.ly/PremiumBenchBlock
Haymaker Saw Frame - bit.ly/HaymakerSawFrame
NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades
Gauge Thickness Tool - amzn.to/3aQkZkQ
Chain Nose Jaw Parallel Pliers - amzn.to/38JlFFX
Round Nose Pliers - amzn.to/3rAoe62
Bail-Making Pliers - amzn.to/3o0sfOM
Rawhide Mallet - amzn.to/3hpJ96Z
GRS Tools Bench Pin Kit - G04-556 - amzn.to/2WHpzcV
GRS Tools 004-557 Fixed Mounting Plate - amzn.to/3nQT3B6
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month www.patreon.com/GomeowCreations
4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month www.subscribestar.com/gomeowcreations
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#bailmaking #bail #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
Brilliant tutorial on making bails. easily understood and a complete set of instructions. thanks so much.
Thanks and I also have made new templates to make it even easier for people. gomeowcreations.myshopify.com/
Thank you so much for the template. I made my first bail ever, so excited!
Excellent video and template, thank you.
Thanks so much! I've made bails this way before but it is so good to see the whole procedure in one place and have the templates, too.
Just trying to help out the community 😊👍
Extremely helpful great explanation of everything
Thanks so much for showing ALL the steps. Which tools to use and how, and some measuring best practices. So useful! Thanks : )
I've always just sucked at making bales... I'm working on a project now and this was super helpful. Thanks!!
I hope the templates help in future projects as well 😁👍
Thanks for this video and the templates Randy. Love using the templates on label paper.
I also sell templates 😁 www.gomeowcreations.com/
Thank you for the detail and the template brother!
Thank you for your video, I've been struggling with bails and this has helped me!!
No problem. I thought this would make things a lot easier for people 😊👍
Thank you, your videos are really helpful! Given me the direction I needed to give it a go
😁
Thank you for the great video. Downloaded the bail template. Good to have. Thank you!
I'm happy to hear that you like them. I do also sell templates now as well that are different shapes cut out of acrylic.
Information was VERY helpful....and thanks for the template
No problem 😊👍
thanks! I really needed this and with a super easy explanation, perfect!
So excited for this video. I'm fairly new to metal smithing and have been making some pendants that need bails. I would prefer to make them rather than buy them. I would love to see your setup in soldering the ends while attached to a jewelry piece. Thanks!
I will do that at some point but if you do that add them before I do that, make sure you don't have your stones set in the piece as you do this seeing that they heat will destroy your stone. Also use a third hand to hold it so you don't solder it to the pendant if you are doing a free floating one
@@GomeowCreations thank you!
Very helpful and easy to understand !
😁👍
Awesome mate thanks very much for the free template! Just about to try making some and this and your video will come in real handy. Will save this video so I can come back and use your saw link. Hope you get something for it. Thanks again!
Hello! I've used them 😊 thanks a lot))!
Great video and exactly what I needed. I love the simple explanation and tools you used.
Awesome video, as usual. You always give very good detailed explanations. Thank you so much.
Glad you like them! 😁
Thank you for the lesson and free template!!
No problem 😊👍
All the best to you in 2021! Looking forward to more Gomeow videos! 🙂
I'm so happy to see this.... and THANK YOU for the freebie template!
no problem and thanks for watching 😁👍
Enjoyed your video and I gave it a Thumbs Up
Glad you enjoyed it
@@GomeowCreations You're welcome
Beautiful work! Appreciate the bail template!
No problem 😊👍
Very nice! I think I yoinked a bail design from your video a few days ago to make my most recent pendant. Lol
Thank you so much for the template ❤
Great video, I always use just a jumping because bails are a bit scary but this makes it simple I'm definitely going to have a go x.
I'm happy that I was able to make it easier to understand and that you are willing to try it out now. 😊👍
Thank you so much for the template
Perfect timing! I really need to move on from using multiple jump rings and make something a little more substantial for my necklaces. I like the look of multiple rings but sometimes a piece calls for more. Especially medium to large pendants. And the template is awesome, thank you! Already printed and will be using it.
Nice well let me know how that all works out and if you have any questions
TY great video. I’m loving that saw
Thanks for the template! That is very helpful! And your new GRS set up is sweet! : )
No problem and thanks.
Good video as usual and the template is a real boon that makes bail making really easy. Anything like it would be very well received 😉😉. Thank you!!!
😁
Awesome, thanks a lot for the nice templates!!
No problem 😊👍
Great video, Randy. Thanks so much for the template. I'll definitely be using it and look forward to seeing what you come up with next.
😊👍
Thanks for the video and template! I have those exact same shears, they work great. Though, I don't use them for bails usually.
How did you access the bail template?
Hi. Great video!
Can you tell me how to shine this bails?
Great video
Thanks
Good job bro you also work same as me
Another great video. Thanks for the great information
Thanks 😊👍
Thanks!
😁
I enjoy watching your videos. I was wonder how you like the shears you use in this video. I have been looking for a good set. Please provide a link to the shears you recommend. I have looked on your website with no luck.
Hand Shears Metal - amzn.to/2KN7uYG 😁👍
Your bench is clean.. Too clean.
I have to clean up for video so I can fine stuff haha
Hello, I just found your channel and find it incredibly helpful. I have a question if you wouldn't mind helping me. I want to make a ring for a friend with a sunflower on it that I plan to make out of brass. I want the band itself to be disconnected and not form a solid ring to that on one end is the flower and on the other is a bee that looks like it's flying towards the flower. What thickness of metal should I use for the band so it's not too weak or easily bent? Thank you in advance for any insight you can provide me
Thank you! 🙏👍
No problem 👍
first of all thank you for your advice which is very useful to me. but I would like to know about this jewelry, is it black and red resin between the metal? thank you
It's enamel and here is a link to the video I made it in ua-cam.com/video/vZ1dsx1kaNs/v-deo.html
@@GomeowCreations merci
Many thanks for the templates, i would love to see ring blank templates ie signet rings etc
I have that in the works now 😁👍
@@GomeowCreations many thanks x
Awesome, thank you!
Thanks for the video. I tried downloading the template and no luck yet. Do you consider the attachments at the ends of the chain and size of the bail so you pendants don't slide off the chain and get damaged. In the UK if you can't easily remove the pendant from the chain then both pendant and chain are considered one item and so could easily slip over the 7.2 gm silver limit, making the expense of hallmarking necessary.Anyways great video.
Thank you for this. I just found your station and LOVE it! What file and large pliers are you using in this video?
This is the main file I use amzn.to/37ZYiZF and the small ones can be found here amzn.to/2WWvvPs as for the pliers, I don't know what ones you are talking about but I think I have links to all of them in the description of the video.
Thanks for sharing, what brand and tooth size of saw blades do you use?
I used these bit.ly/NANOSawBlades
When it come to size it really depends on the metal you are cutting my I use 2/0 and 3/0 for most of my work. I use size 5 on things like casting sprues.
@@GomeowCreations Thank you, I just ordered one to cut silver castings from the sprue and it was a Amazon cheapie so I know the blades are probably junk and want good blades. I will use your link.
Can you please give me the info on the hand shears you used to cut the 19 gauge metal. Thank you!
amzn.to/2KN7uYG 😁👍
@@GomeowCreations thank you!!
Great video ..
Thanks
Hey. I know this is off topic but how can I dispose if pickle made from vinegar and salt? I've looked up videos and it's usually the ones with chemicals.
This video will help you with this ua-cam.com/video/1mPAXsKXb1Q/v-deo.html
For the most part it will not matter what your pickle is made of, it is the copper that is in it that is the problem. Copper suspended in a liquid is the hazardous material. If you just let it all dry out you can just throw it away seeing that it would just be salt and copper but watch the video for more info.
I am so curious how you look like! You have such a pleasant voice so would be nice to have a face to it. By the way, what kind if file do you use? Vantage to buy one too!
This one of my favorite files that I used all the time amzn.to/2WWvQBI as for the needle files you can find them here amzn.to/2WWvvPs
I've been looking for some good dividers. Where did you get those?
amzn.to/2KCyrhP
Thank you so much for the templates they are going to be very helpful! I have been watching your videos for over a year now and I love them I just was wondering if youtube and your jewelry making are now your only sources of income? I know you have mentioned you work on cars and computers are you still doing that?
So I work on my own cars and computers in my free time to keep them working or updated. I don't make any money doing that haha.
I do make a full income now from my UA-cam channel along with my jewelry. I'm also using my editing a videos skills to make some money on the side as well. 😁
@@GomeowCreations that's awesome! It's great to hear that too your videos have demystified jewelry making for me and I'm working on getting started myself. Thank you so much for the videos. It's really great to have someone like you out there who is down to earth and who's willing to share what you have learned.
@@GomeowCreations so happy to hear that!!!
whats that symbol on the necklace in the video
That is a custom trauma team symbol from cyberpunk 2077 that I made 😁👍
Where do I find the template?
The link is in the description 😊👍
How to download template
What is the pendant?
Here is the video showing me making it ua-cam.com/video/vZ1dsx1kaNs/v-deo.html 😁👍
Where do you have the templates I can’t find them ?
They should be in the description over the video. Look for a link to them and let me know if you find it or not
@@GomeowCreations thanks got it
All idols and images of God need to be made only with refreshed faces and redesigned! From 2022, there will be only one face of God for all caste and religion idols (commandment)! Woe to all disobedient creatures!
I like your work very much, but I accidentally saw your fingers and nails are darker red. Is this caused by paint or some chemical substance? If it comes from the body spontaneously, please pay attention to your health and find out the cause
Thank you for your concern but this is not a problem, see when I shoot my videos it adds a lot of contrast the the recordings. They makes things pop more than in real life. I should fix this color problem by color grading the video but that take a lot more time so I just don't do it. If I look at my nails right now that are just a pinkish tone like my skill. 😅
@@GomeowCreations Thats great, look forword to your future masterpieces.
Check out my Instagram for what I'm working on right now