I am so glad you said something about the subscribe button. I would have bet money that I was, thought I did it a few months ago. Well I would have lost. But I sure am now. Love what you do. Thanks so much
What an awesome tutorial. I have learnt heaps. Just in time for my order from Ali express to arrive. I hope I can achieve half the beauty you created. Thank you.
I have that mould and have had the same issue with the bubbles. The rainbow effect on yours is beautiful. 😍 Great tip for aligning them with the colours. Wouldn't have thought of that. ❤
I just poured one of these but it's curing now. I did take the step of putting smaller rhinestones in the smaller holes on the inside with uv resin. Mine is a shimmery blue and I made a mix of blue and silver glitter (adding glue) for the top. I love your idea though and I will be making it again!
Thank you so much Brenda ❤️❤️🥰 ok so each type of resin has its purpose. Deep pour resin has a very thin (like water) viscosity and can be poured up to about 2 inches depending on the brand. Normal epoxy is a slightly thicker viscosity and can normally go up to about 2ish cm again depending on the brand. Then you have tabletop or coating resin which is a very thick viscosity and is used for topcoats and should only go up to about 1/8in depending on brand. Always read the manufacturer’s instructions for each resin you use because they can vary on how deep you can pour each one. If you pour it deeper than recommended it can flash cure and can release toxic fumes and possibly cause a fire. I don’t know if you watch Louise singleton creations but she has one where she goes through each kind and how to use.
@@brendakatko8286 you are very welcome. Also I forgot to add that the ratios can be different too like let’s resins deep pour is a 2:1 ratio instead of 1:1. Some can be 3:1 another reason why it’s really good to read the directions before use. They also can cure at different times. Deep pour typically takes between 48-72 hrs while a normal epoxy can be anywhere between 8-24. Again these times all depend on which brand you get
@@TheBlueElephantGifts I am disabled and 69 years old and am interested in trying to do it to possibly sell some just to have something to do I just don't know what basic needs to get started any advice I'm interested in the uv resejn
If you are just starting out with uv resin I would recommend purchasing a uv resin kit for jewelry. Let's Resin has one that has open and closed back bezels and a mold along with the resin, add ins and some hardware and a small light. I have it linked in my Amazon storefront (link to store front is in video description). If you are going to purchase molds to use you need the clear and shallow ones or the light won't go all the way through. If you purchase a starter kit and decide you like it then I recommend getting a stronger light like the Let's Resin dual uv light. The smaller ones aren't the greatest if you are using molds. Personally, I prefer using 2 part even for jewelry as opposed to uv resin but that is a personal preference. If you haven't watched Daniel Cooper, maybe check out some of his videos. He does mostly uv resin projects.
I've seen these done by several different people, and yours is the prettiest by far. Great job !
Awe ❤️❤️ thank you so much Gigi ❤️❤️🥰🥰
Very pretty. I have seen it done by someone else - don't remember who - i ❤love yours better. ❤❤❤❤😊
Awe ❤️❤️ thank you so much ❤️❤️🥰🥰
Very elegant, Nicole. Loving the rainbow idea with the alcohol inks 😍♥️💐💐
Thank you so much Fiona ❤️❤️🥰🥰
I am so glad you said something about the subscribe button. I would have bet money that I was, thought I did it a few months ago. Well I would have lost. But I sure am now. Love what you do. Thanks so much
Thank you so much Debbie ❤️❤️❤️ I appreciate it
It's beautiful Nicole ❤❤❤
@@genevafraser5859 thank you so much Geneva ❤️❤️🥰🥰
Very nice love the way you decided to decorate and create the jar. Just my 1 cent
@@JrBurriss thank you so much ❤️❤️🥰🥰
What an awesome tutorial. I have learnt heaps. Just in time for my order from Ali express to arrive. I hope I can achieve half the beauty you created. Thank you.
Thank you so much Leone ❤️❤️🥰🥰 I’m glad I am able to help 🙂
I have that mould and have had the same issue with the bubbles. The rainbow effect on yours is beautiful. 😍 Great tip for aligning them with the colours. Wouldn't have thought of that. ❤
Thank you so much ❤️❤️ I wonder if spraying it with alcohol would help with it
Thank you so much for this video!! I have been racking my brain for ideas on how to pour this mold. That turned out amazing! LOVE your channel 😍
Thank you so much ❤️❤️❤️🥰
So beautiful and elegant colours are beautiful
Thank you so much Yvette ❤️❤️🥰
Very pretty, nice job, you make it look elegant.❤❤😊
Thank you so much Lisa ❤️❤️🥰
That is so beautiful. I love the colours. Thank you
Thank you so much Janet ❤️❤️🥰
That's real pretty!! I've seen a couple people do this jar, and I think I'm liking yours best! 💚💜🩷🤍🩵
Awe ❤️ thank you so much Deemia ❤️❤️🥰🥰
I love your little rainbow jar❤😊
Thank you so much Cheryl ❤️❤️🥰
I just loved your videos and you are so funny god bless you
@@margaritagurrola8255 thank you so much Margarita ❤️❤️🥰🥰
Turned out very pretty ❤ loved the subtle colors
Thank you so much Carolyn ❤️❤️🥰
It turned out gorgeous ❤❤❤
Thank you so much ❤️❤️❤️🥰
Very pretty love the colors
@@HelenHywater thank you so much Helen ❤️❤️🥰🥰
Beautiful ❤❤❤❤
@@tonipatterson8594 thank you so much Toni ❤️❤️🥰
Newbie resiner & subscriber from Tx, Great job on the jar😊
@@cynthiabillington2070 thank you so much Cynthia ❤️❤️🥰🥰 and welcome 🤗
Very pretty and soft 😊
Thank you so much Louise ❤️❤️🥰
Turned out really nice ! Loved the colors
Thank you so much Chloe ❤️❤️🥰
LOVELY! 😮😊
Thank you so much Mari ❤️❤️🥰
Love it, very elegant.
Thank you so much Sharon ❤️❤️🥰🥰
Love you videos, sorry I didn't realise I wasn't subscribed. I have now x
Thank you so much Lynda ❤️❤️🥰🥰 don’t apologize 😊
With hinges for that flat part. I just glued the hinges. 😊
Oh that’s a great idea. Mine didn’t come with any but I will have to get some for it and use them. Thank you so much June ❤️❤️🥰
All my comment did not come through. I think it was supposed to say mine came with little hinges. Great video. I love the egg mold.
@@ownsacat thank you so much June ❤️❤️🥰🥰 mine didn’t but I think I’m gonna see if I can find the right size and get some
This is so pretty! 😍
Thank you so much Debra ❤️❤️🥰
I just poured one of these but it's curing now. I did take the step of putting smaller rhinestones in the smaller holes on the inside with uv resin. Mine is a shimmery blue and I made a mix of blue and silver glitter (adding glue) for the top. I love your idea though and I will be making it again!
Thank you so much ❤️❤️🥰🥰 you’ll have to let me know if you lose the rhinestones. I tried it before with uv resin and lost mine 😕 yours sounds gorgeous
Beautiful ❤
Thank you so much Tami ❤️❤️🥰🥰
😮 it's gorgeous ❤
Thank you so much Faye ❤️❤️🥰
I think it turned out perfect! 💕
Thank you so much Dian ❤️❤️🥰
This is sooo pretty!!
Thank you so much Kelly ❤️❤️🥰🥰
The light color makes it look like blown glass. Really pretty!!
Thank you so much Valerie ❤️❤️🥰
I left a message on your etsy page.😊
I got it thank you Tina I emailed you 😊
I’m Subscribed! This is pretty! Thank you. 💙
Thank you so much Kathy ❤️❤️🥰
Very pretty jar. Love it ! Can you please tell me if the mold turns inside out easily? Have a blessed weekend.
Thank you so much Linda ❤️❤️🥰🥰 yes it does
This is stunning Nicole! Where did you ever find a song about resin? So cool 😎
Thank you so much Cindy ❤️❤️🥰🥰 I created it through an AI website
It looks beautiful !
@@B.L.Creations thank you so much Lisa ❤️🥰
@@TheBlueElephantGifts you’re welcome .
❤❤❤
❤️🥰❤️
😊❤
❤️❤️🥰
🥰
❤️❤️🥰
I love your music today ❤ What is the difference between all the resin choices for example deep pour ?
Thank you so much Brenda ❤️❤️🥰 ok so each type of resin has its purpose. Deep pour resin has a very thin (like water) viscosity and can be poured up to about 2 inches depending on the brand. Normal epoxy is a slightly thicker viscosity and can normally go up to about 2ish cm again depending on the brand. Then you have tabletop or coating resin which is a very thick viscosity and is used for topcoats and should only go up to about 1/8in depending on brand. Always read the manufacturer’s instructions for each resin you use because they can vary on how deep you can pour each one. If you pour it deeper than recommended it can flash cure and can release toxic fumes and possibly cause a fire. I don’t know if you watch Louise singleton creations but she has one where she goes through each kind and how to use.
@@TheBlueElephantGifts Thank you so much for explaining that 🙏👍
@@brendakatko8286 you are very welcome. Also I forgot to add that the ratios can be different too like let’s resins deep pour is a 2:1 ratio instead of 1:1. Some can be 3:1 another reason why it’s really good to read the directions before use. They also can cure at different times. Deep pour typically takes between 48-72 hrs while a normal epoxy can be anywhere between 8-24. Again these times all depend on which brand you get
Beautiful do you make jewelery?
@@debraharvey7126 thank you so much Debra ❤️❤️🥰🥰 yes I have in the past. Not super often. Is there something you’d like to see?
@@TheBlueElephantGifts I am disabled and 69 years old and am interested in trying to do it to possibly sell some just to have something to do I just don't know what basic needs to get started any advice I'm interested in the uv resejn
If you are just starting out with uv resin I would recommend purchasing a uv resin kit for jewelry. Let's Resin has one that has open and closed back bezels and a mold along with the resin, add ins and some hardware and a small light. I have it linked in my Amazon storefront (link to store front is in video description). If you are going to purchase molds to use you need the clear and shallow ones or the light won't go all the way through. If you purchase a starter kit and decide you like it then I recommend getting a stronger light like the Let's Resin dual uv light. The smaller ones aren't the greatest if you are using molds. Personally, I prefer using 2 part even for jewelry as opposed to uv resin but that is a personal preference. If you haven't watched Daniel Cooper, maybe check out some of his videos. He does mostly uv resin projects.
Beautiful ❤
Thank you so much ❤️❤️🥰🥰