I'm kinda surprised for gogoloco that you went for the more manual install method instead of the vrcfury prefab which makes it just a drag and drop install for people. Since that method just merges the controllers and that during the upload process and makes it only takes a few steps. So pretty beginner friendly in terms of throwing it on your avatar.
Yup, this is the way. Doesn't matter whether you've already got custom controllers set. It just merges the gogo loco stuff along with any existing controllers into a new controller at upload. Removing it is just as easy too. Just remove the prefab from your hierarchy.
here is some tips. if you put the tracker on the hip facing left or right arm it fixes that chest tracking. make sure your base stations are placed in a good position
As I don't have a Quest 3 (I still have/use a Quest 2) I use Standable with my Phone as a hip tracker using owoTrack and SlimeVR (In SlimeVR my phone is set as a chest but I don't have the chest tracker enabled in the SteamVR section of its settings if that makes sense)
I'm not even a VR user and gogo loco has helped out a lot for me. Definitely helps blend in more as I'm not just a stiff plank with a single crouch and single prone pose.
awesome video ! i was confused about how standable works, and body estimation, but you explained verry well and now i understand, also the puppeteer seams fun to use x3
IMHO! VD Emulation cons & pros Pros: -Works very stable, you just need to calibrate once and forget about it, while also provide much more alive movement for your body and walking. Even if Quest 3 has ability to track you upper body, it also works very good on Quest 2. Forward bend and side bend looks natural. Cons: -Doesn't have position slider like on Standable. So you can only sit in one position and also lay down in only one position. -When you put your headset down and then hop back in, it can put your avatar in weird position stuck in the floor. So you have to quit VD and launch it again, but you don't have to restart everything at all, you just spend few seconds and you are back in with no problem at all. It happened often before on release, but now not very often, still happens sometimes. -VD emulation is only for Quest which is exclusive, that's kind a sad, at least for now. Standable cons & pros Pros: -As mentioned before, Standable provides position slider, which works good and allows to customize your position almost as you like. -Works on any headsets Cons: -Body movement and overall tracking less alive, walking animation is more like sliding on skiis than walking. Can't bend forward, as it makes avatar to crouch. -Often need to re-calibrate and floor fixing, bugs out the avatar, making it twisting on hips or legs with several calibration to fix it. -Often crashes P.S. I'm a VD user, as Standable are using my friends and even all other people who use Standable, all saying about those problems that I mentioned before. It's still better to have at least something, than nothing. But in my opinion VD is overall better, than Standable.
They are the 2.0 trackers. I use a program called OVR Space Calibrator to combine the two tracking spaces. Probably should have mentioned it- a lot of people use it to combine base station setups with standalone headsets.
@@TahvoStudio Nice! I've been doing a lot more with my Quest 3 than my VIVE lately, and I've been thinking about using SlimeVR with JoyCons as a stop-gap until I can get something like the proper SlimeVR trackers. If I can get my VIVE 3.0s working, that'd be ideal.
Dont have quest 3 (only quest 2),dont have cameras for 3rd party tracking,dont have money nor possibility to buy apps,dont have trackers. This video didnt bring me any solutions.
I have a question. I am a VR user. Dance dash. I want to play this game, but the tracker is expensive I saw this video, do I need to install two webcams on either side of the 60 or 120 frames and run the MoCapforall program?? Q) I've seen delays or unnaturalness in videos of game users made with webcam tracker systems and in games. Won't this happen???
I use standable and I don't have any trackers I recommend it multiple players have been surprised when I say I don't have full body trackers Its really good imo!!
1:58 *It would cost me hundreds of dollars so not possible, its about the same price of actual trackers cuz virtual desktop is pretty high priced and i need a way better pc cuz i only have a chromebook and that cant run steamVR so basically i ether be: Rich Or HELLA lucky, to get full body tracking so yeah I'm not that lucky and also not really able to afford that stuff.. so hooray! no full body tracking even just estimations, for me..*
hey im having trouble. when i set everything up correctly but when calibrating in vr chat, my elbows are a bit like wonky, like bending inward/outward. any fix?
Im mostly interested since this would fix some issues that the camera has while also giving a full motion without ANY trackers, which would be soooo much comfortable
@@CallmeStar My friend and I came to a discussion on this before. Mac is better for creativity and creation. Windows is better for productivity and gaming. Also, my parents bought a $2799 MacBook Pro for my graduation, not me.
Standable is very decent in my experience. I'm sorry you feel that way, there is also a large discord community for standible that can help with whatever issue you are facing.
God, I’m so lucky that I downloaded OVR advanced settings before it became paid to get
Same
@@Djx51omg same me too
just found out its not free anymore glad i got it earlier
makes me happy i was able to, RIP all the new VR users tho
Had to buy it :/
SlimeVR with standable 2.0 is sooooo good lol
I'm kinda surprised for gogoloco that you went for the more manual install method instead of the vrcfury prefab which makes it just a drag and drop install for people. Since that method just merges the controllers and that during the upload process and makes it only takes a few steps. So pretty beginner friendly in terms of throwing it on your avatar.
Yup, this is the way. Doesn't matter whether you've already got custom controllers set. It just merges the gogo loco stuff along with any existing controllers into a new controller at upload. Removing it is just as easy too. Just remove the prefab from your hierarchy.
here is some tips. if you put the tracker on the hip facing left or right arm it fixes that chest tracking. make sure your base stations are placed in a good position
As I don't have a Quest 3 (I still have/use a Quest 2)
I use Standable with my Phone as a hip tracker using owoTrack and SlimeVR
(In SlimeVR my phone is set as a chest but I don't have the chest tracker enabled in the SteamVR section of its settings if that makes sense)
I like how the puppet controllers is just paws. Also very useful programs :3 thanky for sharing
I'm not even a VR user and gogo loco has helped out a lot for me. Definitely helps blend in more as I'm not just a stiff plank with a single crouch and single prone pose.
awesome video ! i was confused about how standable works, and body estimation, but you explained verry well and now i understand, also the puppeteer seams fun to use x3
Always the info guru when it comes to equipment and programs used for a better VR experience.😺
IMHO!
VD Emulation cons & pros
Pros:
-Works very stable, you just need to calibrate once and forget about it, while also provide much more alive movement for your body and walking. Even if Quest 3 has ability to track you upper body, it also works very good on Quest 2. Forward bend and side bend looks natural.
Cons:
-Doesn't have position slider like on Standable. So you can only sit in one position and also lay down in only one position.
-When you put your headset down and then hop back in, it can put your avatar in weird position stuck in the floor. So you have to quit VD and launch it again, but you don't have to restart everything at all, you just spend few seconds and you are back in with no problem at all. It happened often before on release, but now not very often, still happens sometimes.
-VD emulation is only for Quest which is exclusive, that's kind a sad, at least for now.
Standable cons & pros
Pros:
-As mentioned before, Standable provides position slider, which works good and allows to customize your position almost as you like.
-Works on any headsets
Cons:
-Body movement and overall tracking less alive, walking animation is more like sliding on skiis than walking. Can't bend forward, as it makes avatar to crouch.
-Often need to re-calibrate and floor fixing, bugs out the avatar, making it twisting on hips or legs with several calibration to fix it.
-Often crashes
P.S. I'm a VD user, as Standable are using my friends and even all other people who use Standable, all saying about those problems that I mentioned before. It's still better to have at least something, than nothing. But in my opinion VD is overall better, than Standable.
Only now discovering that Quest 3 has upper body tracking. This is sick imo.
How do you do VIVE Trackers and Quest 3 at the same time? Are they the VIVE Standalone trackers, or are they the Outside-In trackers?
They are the 2.0 trackers.
I use a program called OVR Space Calibrator to combine the two tracking spaces. Probably should have mentioned it- a lot of people use it to combine base station setups with standalone headsets.
@@TahvoStudio Nice! I've been doing a lot more with my Quest 3 than my VIVE lately, and I've been thinking about using SlimeVR with JoyCons as a stop-gap until I can get something like the proper SlimeVR trackers. If I can get my VIVE 3.0s working, that'd be ideal.
Dont have quest 3 (only quest 2),dont have cameras for 3rd party tracking,dont have money nor possibility to buy apps,dont have trackers. This video didnt bring me any solutions.
I wonder if joycon + standable would improve the quality of joycons
makes me wonder if i could somehow rig my old rift sensors to help with full body estimation
This is very interesting thanks for the info!
ty!! I was looking into getting Virtual Desktop because of my quest 3 not wanting to connect to my pc
I was not expecting to see my comment in this video
how did i never know virtual desktop to do this😭😭😭
WHATTTT THIS IS SICK
There's also Viso for camera-based tracking
I’ve got a video on that!
I have a question. I am a VR user.
Dance dash. I want to play this game, but the tracker is expensive
I saw this video, do I need to install two webcams on either side of the 60 or 120 frames and run the MoCapforall program??
Q) I've seen delays or unnaturalness in videos of game users made with webcam tracker systems and in games. Won't this happen???
OVR is NOT worth $7 idk why they changed that 💀
voice soothing love to watch your videos even if i dont need em.
I use standable and I don't have any trackers I recommend it multiple players have been surprised when I say I don't have full body trackers Its really good imo!!
quest 2 also works with virtual desktop fbt and index tracking
Can you mix Virtual Desktop with standable?
Using ALVR meta to PC estimation is completely free. Just be prepared to go through a lot of pain setting it up.
Article title:How to currently get full body tracking for $20
Article: No
But if I don't own any avatars and are VRChat's, which of these methods would do the job in this situation?
Still debating of Quest 3 or the Index.. but this makes me want to get the Quest 3..
Ngl if you have the money to get vives just get them I have them with a q 2 and I get better tracking then index users
Thank you for another informative video . Hope to see you in VRC again .
so whats everyones opinion which one do u think works best and which one i should try standable or virtual desktop
meanwhile me using a xbox360 kinect with Amethyst i might try that with standable if it works
Hey cant go wrong with the Kinect
0:45 yep, definitely not sexual
love seeing your avatar in full
could puppeteer be used with basestations?
Me who's watching this when I already have SlimeVR:
Me who already paid for them and it didn't arrive since February:
Thank god I already own ovr then
I love the responite avatar poser so nice
1:58 *It would cost me hundreds of dollars so not possible, its about the same price of actual trackers cuz virtual desktop is pretty high priced and i need a way better pc cuz i only have a chromebook and that cant run steamVR so basically i ether be: Rich Or HELLA lucky, to get full body tracking so yeah I'm not that lucky and also not really able to afford that stuff.. so hooray! no full body tracking even just estimations, for me..*
hey im having trouble. when i set everything up correctly but when calibrating in vr chat, my elbows are a bit like wonky, like bending inward/outward. any fix?
Have you tried using the viso fbt (the camera full body tracking with video camera) with any of this programs?
Im mostly interested since this would fix some issues that the camera has while also giving a full motion without ANY trackers, which would be soooo much comfortable
OVR WENT TO PAID? HUH!
will any of these work with skater vr? ik itll work with most shooting games i play like bonelab and contractors, but wat about the sports?
The virtual desktop option works well on the quest 2 as well, you just can't move your shoulders (i have a video on it)
tho its using trackers i think you really should have mentioned that (aperently) you can use phones and joycons as slimes for an app called slimevr
I’m setting up a tracking on the quest two using the eyetracker VR project, maybe you should look into it
Quest 2 Vitual Desktop Vive Emulation does indeed work btw!
Virtual Desktop FBE works surprisingly well, even on Quest 2.
Leg
$20? Is too much
awww cute furry =w=b
great vid! i plan on combining all the tracking software i have in the future just to see what happens >:3
yipee!
Does it work for Blade & sorcery nomad?
Thats cool
i wish i had vr
Would the elbow tracking thing work with Pico 4?
Nope, Quest feature
@@TahvoStudio Ight, thanks
Furry
Damn this is a great video Tahvo! Well heckin done ^^
pupy
Literally all Mac users (me) when they learn that most/all of these are Windows/SteamVR Exclusive: 😔👍
If you have enough money to buy a Mac then buy a Windows haha sorry but its way better for everything.
@@CallmeStar My friend and I came to a discussion on this before.
Mac is better for creativity and creation.
Windows is better for productivity and gaming.
Also, my parents bought a $2799 MacBook Pro for my graduation, not me.
2008 Toyota Corolla
2008 Toyota Corolla
Are it software easy to install?
:0
Cool. Something ill definitely get.
so there none for quest 2?
I heard the VD option works on quest 2 except for elbows
Sadly vrchat would have to implement the Quest full body or someone would have to make an OSC router
Ok
Does gogo loco work in other games
Sadly no. Gogoloco only works in VRChat
Cute Tahvo as bonus. Yay
heee heeee
Oh yes thanks
Hmm
tpyo in gocos time stamp great vid though
What’s the blue dudes name 8:02
It’s my character named Berry
@@TahvoStudio thanks
first love the vids
This generation is cooked, what are you wearing
Standable is a scam. $20 for shit
DO NOT BUY
Standable is very decent in my experience. I'm sorry you feel that way, there is also a large discord community for standible that can help with whatever issue you are facing.
why a furry
Why bro got wide thighs
Skibidi
I don’t trust thz😊
The dog looks very thick