Це відео не доступне.
Перепрошуємо.
M8 Softail Dual disc brake conversion
Вставка
- Опубліковано 30 гру 2020
- In this episode of the StreetRider series we convert the front 49mm single disc legs to 49mm dyna Lowrider legs off of a 2015 fxdl. This is how it’s done.
www.kruesioriginals.com/
Joe Mondello was an OG hot-rodder and Oldsmobile guru
Quickly becoming my favorite channel!!
Thank you 🙏
Agreed...always look forward to a new video
Backhanded compliment, as though their still earning your heart.
"Instantly became my favorite channel "-FiXeD
🇺🇸🦅🔥✌
This is one of the sickest moto channels on UA-cam. Good shit man. Keep it up.
Great videos, I’m in Wisconsin but have called for tech support and ordered parts and shirts from you guys. Keep the content coming it’s great
Thank you my man🤘🏼
Never fails with the fork oil. I’ve never done a set of forks and not somehow spilled the oil 😂
That's what funnels are for ! ; )
Best channel on UA-cam by far. Looking forward to all your future content. Good stuff 👍👊
I'm just gonna go on the record now and say your channel is going to BLOW UP if you keep the content coming. 🔥💯
Agreed 👍🏼
Jon hit the nail on the head !!!!’ Much love from the east coast to both you guys loving the content
I feel your pain, my lowers had powder coat all the way up and a little inside. I wish I had the RT gold valves, they were back ordered here. One of my fav channels.
1 video and you got yourself a subscriber! I've been wanting to do the same but couldn't figure out the parts list. Thanks for the info, keep em comin!
Welcome to the show
I think I'm losing it ! I was watching this just before midnight new year's eve, cool shit as always
Happy New Year’s my dude
Ryan, I know there’s probably no possible way you don’t know this already but they make a tool to hold those damping rods so you can pop that bolt loose. It’s like $20 in the Drag book.
Also you can go to O’Reilly Auto and buy this cool set of short Allen sockets that are 1/4 and 3/8 drive, they have them in metric and standard and the 3/4 and 19mm from that set will pop the axles all day. Also Motion Pro makes a tool that has like 4 hex sizes built in, I have two of them from back in the day when I didn’t have the clout to refuse to work on metric junk.
Nice Kershaw. Best video so far, keep the fire coming, love the vids.
Loving this build. I've got an '18 Street Bob.
Awesome build I'm really enjoy binging on it.
I tell my son that shit all the time “stop and realize I have been doing this a lot longer than you”
Amen
And, if your son is like my sons, they look you in the eye and ignore you.
Good shit bro, I thought you'd have to get new legs. Nice save it's a fine line between not enough n cut to deep.
Thank you for keeping it real. showing the spill of fork oil and that fork tube was dented. I do things like this all the time.
Number one goal behind this whole program is keeping it as real as hell.
Its crazzy i fired up U Tube to check out what u guys were up to and it just so happens im doing a 49 mm front end this weekend for a buddy of mine and this step by step will so be our go to video thank dude i think your vids are great u say shit how it is no matter what cant weight for the next one for next one broke my neck in a bike crash got hit by a micro burst ( sideways tornado) bike came off the road i rode it out on the gravel my daughter fell off so i drove the bike in the ditch not too run her over hit a colvert at 60 broke my neck c2 c7 fucked up bad so im in bed alot and UTube is where i live now and your shows kill hours for me thanks guys
I feel you my dude I broke my C-5 six and seven for years ago it was a horrible experience. It does get better over time I spend a whole Lotta time in bed to
Thanks for the informative video fellas. Lots of game being dropped
Bro fucking finally someone came out with this 🙏🏼
The rod and scotch-brite was very informative good idea.
Kruesi is the fucking man. That oil spill made this video EPIC. Real shop life right here. Love it.
Pretty real, you didn’t see the second time I spilled it on myself while filming this video covered my whole entire leg😂😂
I was going to say the same thing he could’ve easily edited that out but he chose realism lmao!
Crown Royal bags in the tool box ✅ LOL
Love your channel. Greetings from Germany.
🤘🏼🤘🏼
Thanks for always teaching us the ways OG Miyagi
😁🤘🏼🤘🏼
tech tip#1even though we can be cranky at times,remember us og,s always have a few tricks up our sleeves!we,ve been around,and seen a thing or two!!!
Great video! Entertaining and defiantly learned a thing or two.
Thank you, glad you liked it🤘🏼
You are killing it.
The doctor is working overtime!!!
Awesome video!
Shirts with a Harley and the quote “burnin gas and smashin ass”
Would love to buy a dyna from you guys im sure they are ridden hard but i know they are built right
Definitely best Harley content on UA-cam wild hogs baby 😂
It’s in my skin
Allways love a good "to" video
Those lowers powder coated look awesome,hey to get yhe uppers black what's the process usually?? Anodize them??? actually now that I see them better they look powder coated too, but I've seen them that look they been anodized,,,, the uppers,then powder coated lowers
Awsome series.
Thank you 🙏
Fuck yeah thats looking like one sweet street rider low bob.
There's a good French brand called Beringer Brakes that's making Harley brake calipers. They're making master cylinders and clutch perch as well
We’ve run them a bunch of times they do not make a very good product especially for the price. I will take them if they were free and they came with a rebuild kit.
@@kruesioriginals They’re expensive that’s for sure. But you could try and ask them actually, they’re into everything so maybe they would be happy to get onboard with your project
In the process of converting my FXDB to dual disc do i need to change my master cylinder ?
This may sound dumb, but I’d really like to do this to my FLHC
You would have been a badass instructor !!
@8:56 smooth move ExLax. Lol. Done that shit so many GD times its a wonder I havent stopped.
I love old man tell his knowledge. I heard it probably wont remember! lol
You got really sick, as i did, because your body fought hard. That's what it's designed to do. The channel.is getting better all the time.
How many holes and size I need to drill on my factory dampeneding rod?
Keep em comin!
My favorite channel. Hey guys can I wheelie a stock 2013 fatbob?
Love the ol timer mentioning Joe
I just got my m8 street bob yesterday bro man that shits a beast!! Just need a pullback setup and I’m good. Does lifting the rear also make u sit upright? I got short ass arms 65 inch reach
Taller rear shocks will help, and a saddlemen step up gripper seat will put you forward or a tuck and roll would be nice
Bro i have 100s of crown royal bags. Def have a few carbs chilling in some rn lol.
IT’S CALLED DAMPING NOT DAMPENING GOD DAMMIT! FUUUUUCK!!!! LMAO 🤣 Enjoy the vids tho. Watching them makes me slightly less depressed haha
Videos are dope. Keep up the good fucking work.
Excuse my ignorance, but who makes that engine guard/crash bar protection on that M8?
This was the best fork rebuild video ever ... fucking thank you..!!!
😎
is this possible to do on a 2018 breakout fxbrs?
So you're running dyna lowers and getting rotors made for the Brembo setup. Is that to correct the surface area issue with the brake pads?
Yes we have to run 11.8 mm rotors for those calipers. But we are also having our own line of wheels coming out and the rotors are going to match those. There’s pictures on our Instagram we got some serious pimp shit coming😁
Loving the videos! I die laughing from your fuckn videos. Cash money baby
Part number to that 21mm Allen snap on socket would be very helpful my snap on guy can’t even find it In his catalog lol.
I have no idea what that number is my man
What’s the brand of that headlight? Thanks :)
What vented dip stick if that
Glad you shook that calentura homie stay up
It was brutal
Dude another great video! Oh eat the cats you have 14 to many!!😂😂💯🇺🇸
What do you think of the rebel 1100 for a stunt bike? I mean they are chain drive under 500 lbs and have wheelie control, might be kinda cool
I don’t know anything about them, I keep hearing people talk about them I think I’ll look into it
@@kruesioriginals could make a cool video
I’ve been doin fork seals wrong this whole time🤦♂️. It’s really nice to see a how to video that doesn’t have some fuckin dork doing the teaching.
You guys are all badasses lol have me laughing all the time
The titty calendar is true 😂
“Make it better than everyone else does”
That’s the way to go!
You gonna have those mags for sale when you get the new wheels?
Maybe
Hey what kind of tripple tree and fork legs are you running, looks bad ass, love the wider front tubes
That is a stock front end. The tubes are black pro one tubes but stock size. They have all been 49mm since 06. Trees are stock as well
www.kruesioriginals.com/products/pro-one-fork-tubes?_pos=1&_sid=2b08fe1d6&_ss=r
Does this conversation work that same way on dyna
Yes sir
I'm trying get me lowers off a low rider for my 10 street bob too. Seem like they're hard to come by in the natural finnish. I wanna polish them and clear em.
You can get them from Harley Davidson 190 bucks apiece
@@kruesioriginals That's not bad at all. Thanks for letting me know. I sure as hell aren't a stunt rider but I am hard on that bitch. It has been good to me. Ima put some cams in it and do the brakes and that bitch will be on point. All in due time. I got big dreams and shallow pockets. Hahaha. RFTC.
@@tetlow2 You only need the right side leg as well you can use your stock left one. Save you some money
@@kruesioriginals ya and my stock wheel is set up for another disk. I just need a caliper, rotor, the master cylinder, a slider and line and shes good. Too bad there aren't and harley junkyards. I should be able to find the shit at a swap meet if these asswipes open life back up.
After all that, all I want to know is.....what was that green canister you were sprinkling on the fork oil spill ? Never seen that one before.
I know this video is about a year old but hey, look at it this way. There is people out here interested enough in your vidjayos that were digging back an entire year to watch your stuff.
All bullshit aside, thanks for the good stuff. It's good to know there is still some real mofo's out there in the world.
😁 It’s non-chlorinated brake clean. In a pressure pot. It’s the good stuff
Perfect.
In this video we just watched Ryan Kreusi learn something.
This is why we respect those old guys kids !!!!
How many kids have you sold to afford all those Snap-On tools? 👀 Came here from Jon's Moto Garage.
27 and 2 cats
What about the arlen ness big brake?
I wouldn’t run them.
Ok kruesi,i noticed the hoodie said hardcore on the back,is that a hardcore band?? Im big into hardcore as well thats why i asked, if so,u just keep getting kooler and kooler
I know alot of guys are having good luck using GSX-R breaks on there dynas and shit,any used street bike tokicos are a good upgrade on the cheap
Every time I watch your videos I want to cry
Harley has some inverted Forks now are they worth of shit?
It's been said that the softail handles like a dream with touring trees.. you know anything about this.. of course you could use the dual disk
The coof was pretty hard on old fat guys🤣 🤣🤣 I'm glad your ok and that the flu didn't take u out. Is there a reason you run 7/8" bars instead of 1"?
That spill was down horrendous
Wursher
😎
BAAAAMMM!
Drops the oil pan, I have been doing this a whole lot longer than you. LMAO.
Fuck yeah.
Yeah fuck yeah
@8:50
Lol..cancer water 🤣😅😂😅
Ohhh myyy gggod if I had a dollar for every mess I made
How tf u my cool uncle we the same age
If I had set the beaker of oil on the work bench and ...
12mm not 21mm
I have a suggestion for anybody considering this: just get the bike with the dual disc brakes
Where’s the fun in that? Just did a dual disc conversion on my old fxd. Worth every penny
Warsher
Buy ones cry once 😂
He solders a lot cause he’s not smart enough to get the shrink tube with solder in it
"I am not a Teacher " WRONG !