Chevrolet Chevy Cruze Front Bumper Cover Removal And Installation (2012 - 2014)
Вставка
- Опубліковано 7 лют 2025
- How to remove the front bumper cover on the Chevrolet Cruze. This should work on 2012 - 2014 models.
I'm disappointed at how flimsy the bumper is on the Cruze, especially the tabs that clip into the fender. Very easy to break those unless you use a couple of tools to carefully disengage the them.
Perfect. I do not think this video could have been made any better. This puts my mind at ease the way he flew through the procedure but with specific information that is helpful and how he did not go too fast explaining the steps. Straight to the point and precise.
One of the most precise and well-made how-to videos I've seen in awhile. Thank you for taking the time to make this!
Exactly
Thank you for a very well made video. Clear views, clear explanations, even "what to look out for" tips with ways to avoid damaging your car. Maybe a little too much time watching you take screws out but over all really well done. Thank you.
Thank you! You did a very good job at explaining the steps. I tried to follow Spyder Auto's version however they missed a lot of steps. i.e. The clips on the side... you said told me they were there AND EXPLAINED how to unclip the bumper. however other videos on youtube did not even show me there were clips there. They just enscrewed the T15 screws and then just simply took off the bumper.
+Racing For Life You're welcome :) I've done many bumper cover removals and you normally do not need to mess with the clips - just pull on the cover. On this Cruze though, the bumper is made with some really shitty plastic and you run the risk of damaging it. Hopefully Chevy fixes it on the next generation.
good video, for pics i used one with small curve to push down on black tab then straight small pick to pull up on bumber tab n came off very smooth with no damage to bumber, thanks
Note: similar to Chevy Trax bumper! Thx for the great pointers on how to avoid breaking the side tab clips!!
Thanks for taking the time to show how to do this. Just got a 2012 Cruze and need to replace the bumper.
2:05 to 3:55 is really good info on how to get to your car horn if you're only interested in replacing the horn without removing the bumper. Be sure to mind the front temp sensor.
You made a great video, you gave me all the information I needed. Even with helping know which tools I'll be needing. Thanks
You are not the only one but you are the best ...... well done.
Are the clips on the sides called the front bumper fascia? I wrecked my car and I’m replacing my front end but I think I’m missing clips!
Thanks for this tutorial. I have a Chevy Sonic and want to replace the horn. This gives me an idea of what I have to deal with. Subbed!
Thank you. You saved my life!
Parabéns pelo vídeo e pelo cuidado em não produzir danos à pintura ao remover as travas!
What size were the first 2 bolts?
Excellent instructional video. Seems pretty easy after watching it. Thank you.
K
At the 3:05 mark How do you get the 4 push pin clips back in? Ive been trying for a full day 🤦♂️
Excellent explanation with this video I can remove my chevy cruze bumper.Thanks
Can this be done without a jack?
howndo i imstall the new bumper retainer that the bumper snaps into netween the lights
Hey happywrenching. Great video with clear instructions. I have a question I'm hoping you can help me with. Is it possible to remove the bumper cover without the use of a jack? If a jack is required, can I just use the jack that goes with my spare tire or do I need a better one? I'm trying to replace the headlight covers on my 2011 Chevy Cruze LTZ. Thanks.
Konustugu dili anlamama ragmet mukemmel anlatti tesekurler
what is labor time to remove bumper and install? Thanks in advance
So funny story, I was installing my foglights (hadn't done it before and I just followed the instructions) ended up not being able to do it properly because I couldn't get the bumper off without breaking it the tabs, I broke one tab on the driver side trying to figure it out (now I find this video) so I took it to the dealership, who managed to get the bumper off, but they broke all the tabs, all of them, getting the bumper off. So they replaced the bumper "free" of charge but dinged me for $500 for installation... It should have been a $230 job which is what I was quoted.
+MrPartyWaffle Ouch. I'm surprised the dealer broke the tabs. Usually they have the right tools for jobs like these.
So the plastic of the bumper warped or the frame it sits on?
I'd love to know what other problems you have had with it so I can make sure I get them checked since we have the same year and all.
***** Christ Mark, I hope everything goes well in your favour. It's not like they can't afford it after that bailout.
Does your state have a "Lemon Law" go see a lawyer I guess, you're driving a possible deathtrap waiting to happen.
Fortunately I have not had any of these problems, literally any... Do you know what plant made yours?
***** I'm Canadian too from the same plant, makes me wonder how far off our production numbers vary.
I know how you feel, probably not to the extent has you're dealing with, but I understand.
Hi Mate, thanks for sharing, much appreciated.
Very good video and great tips. Good job.
Hey I have a question my side marker broke off because I hit a gas tank that fell off someone's car while driving, I was able to buy the side marker for the drivers side but the male portion of the cable ripped off, is there anyway I can replace that or something
Do you really need to remove the battery terminal when removing the front bumper, just thinking maybe the computer will be reset if I will remove the battery terminal.
I'll be removing the front bumper on my 2012 Cruze Eco on Sunday, installing projector headlights and HIDS. Really hoping I don't brake those stupid tabs by the wheel well. Seems poorly done if you ask me.
Como montar rolamentos no Ford C/Max
A frente Motor PSA e desmöntar ao mesmo tempo
Does the 2015 RS/LTZ front bumper fit on the 2015 LT?
Hey bro the air temperature tester where do I get that to buy do u have a link
Any tips on fixing broken tabs?
Is it the same or similar process for the 2010 cd model?
Can u replace horn by just removing bottom cover, my daughters horn stopped working
to replace the radiator on this cruze do you need to remove the front bumper?
I need to replace the whole headlight assembly on a 2015 Cruze. Do I have to remove the front bumper
Peter booher, I'm fairly certain you do need to remove the bumper cover. I myself have a 2014 Cruze and want to replace both my headlight assembly's.
Is there a way you can show us how to change the headlights on a 2017 Chevrolet Malibu?
i like content creator that use audio from the video when removing certain things so you can hear if your breaking it or not
Can you possibly make a video on how to change the front bumper cover on a 2012 Buick Verano?
Hello Happywrenching, I'm writing a blog on removing the radiator. The underside of the front bumper is damaged so I would miss several of the steps that you show here. can I post a link to bring my readers here to your video? All credit for your great work will definitely be given to you.
I have no problem with that - go ahead.
Thank you. You saved me from tearing up a bumper!
Where can I buy a front bumper?
This video helped alot
hi. how to install mesh behind grill to protect the radiator for malibu mk8
Thanks for all, you are amazing.
Can someone post a picture of the ambient air sensor, its location and what the wire connector looks like. I dug into the area of the front left bumper yesterday. Couldn't find the sensor but there's a wire connector floating around.
Video makes it seem much easier than it actually is 😂
It's super easy!
I have a 2016 Cruze with the RS package. The horn on this car is pathetic, and I would like to replace it. Is it necessary to remove the whole front bumper, or can I get in from the bottom by removing the bottom splash cover for replacement?
Marty Mertz I have a Chevy Sonic. Wondering if there is a shortcut to change out the horn too.
Marty Mertz ur crazy the horn is fine compared to kia
Does anyone have a video for a 2016 volt. My washer fluid pump isnt working. I cant believe I need to take the whole pumper off for this
any solution for broken tabs?
Hi happywrenching. Do you happen to know if you have to remove the bumper to get to replace the fog light bulbs? Or is it possible to replace them without removing the bumper?
You should just be able to replace your fog light bulbs by removing the front panel from underneath the car and twist the bulb out the same way you do with the headlights. There's really no need to remove the front bumper.
is it possible u help me out of buying the front bumper for 2015 chaverolet impala and it's black..I tried find it but I have no idea which stuffs to buy..hook me up bro I need to change my front bumper which was damaged last week
Muito bom o video mano. Grato, parabens.
hi thank you for the video. where can i buy this replacement bumper?
+Jessica Echague You can buy pre-painted aftermarket bumper off of eBay but the quality will not be as good as OEM. Another option is to buy a primed after-market bumper and then get it painted by a paint-shop of your choosing. Finally, there is always the dealer but be prepared to spend at least $500 - $1000 for a painted bumper.
Como montar rolamentos no ford c max a frente
Junk yard!
Hi,
Thank you for posting this video. Is there any way to change the grille without removing the bumper? Could you send me link for that?
Nope, there's just not enough room to get to the back of the grille so the whole bumper cover must be removed. I haven't found any videos that show the process though.
Thank you.
Can an 2011 Chevrolet Cruze bumper come loose with out anyone tamper with it?
Yes for sure, those plastic clips get brittle with age and break. Especially if you drive on rough roads.
Thank you. Very helpful
thank you please can you make video for cruze with VCDI engine thank you
Would you happen to know the name of the tool needed to remove the clips under the headlight and by the fenders? Im installing white LED behind my grill
is there a way you can show how to replace the fender on the chevy cruze because I'm catching he'll trying to attempt on my own
THANKS !!! YOU ROCK !!! SCHPAY !!!
How to install just the grille front bumper only
I can’t get my front bumper to line up
I saw a video of some dude straight yanking that bumper and didn’t break a single clip
Thanks for your works. That help me with my cruze. It`s helpful video, subscribe your channel
Fantastic job!!!!
Very Helpful Thank You!
I was going to make a video but better to just refer back to this one.
Thanks bud!
It's what you get when cheap parts are used, as to why the clips break.
Engineering to.
Hi. Can you do video like this,but for Cruze with RS package?
So 35 minutes or so?
Very helpful
Thanks, very helpful
Anyone know the GM number for the bumper?
I need to do the same but with Chevrolet Orlando. Do you know if its exactly same like in your video? I am trying to fit front parking sensors
Thank you
Thanks bro
Cool
And I thought my Malibu was a pain in the ass to replace the headlight. This looks even worse. Why did they design the cars this way?
So dealers and shops can make a lot of money by changing your headlights for you.
James Richard well thank goodness for UA-cam and my dad for teaching me how to use tools to fix my own stuff lol
I know right lol. UA-cam has saved me a lot of money on car repairs and upgrades
that is my car
جميل جدا
Круто
what a pain the in ass, thanks for this video! now i know what to look forward to =) haha
It's super easy!
Чётко
Un breathe yourself
POS car
😉👍👍👍🤝
Thank you
Thank you