Any idea how you clear the preset cleaning cycles? Or reset the controls totally? Mine seems to be fine for a while then using a kw of electric for half an hour every hour! Getting expensive! Turning it off and leaving it off doesn’t clear the memory. Cheers
Hello can you help me please … my cleaning cycle only works in stand by mode … and when it’s in that the temp does not work so the heat drops … can’t I have both at the same time heat control and cleaning cycle????
This video has been incredibly helpful thank you. I wondered if anyone on here had any idea where I can source a new screen for this spa. Mine is dying 🥲
Hi i have recently purchased 1 of these controllers for a chinese hot tub, but on fitting and turning on the tub clicks on power up, and the display back light is slightly back lit but no display icons, any ideas as to where and what to check? the old panel lost display but showed power via a red panel light eastern spa/ majestic approx 2006
I’ve had my Chinese tub for about 13 years and it’s great. But I can’t seem to turn off the circulation mode. I know it says press the MHz button but it doesn’t do it. No button will remove the symbol and the word “on” any ideas??? Thank you .Al
You're a god send. Ive been trying to decipher the very badly written instructions for weeks to no avail. Can you explain the pre heater seatings or do I not need this feature. My tub won't reach the temperature I've set it to and will only get to around 22 degrees before it starts dropping again. Ive put a brand new pump, control panel and heater on but still the same thing is happening. Can you help?
Hi richard thank you for such an informative video but im trying to set the time but the words cycle are on the screen and the filter circle is on the bottom and has been like this for a few days and it wont let me set the time do you know what i should do please ? Tia
your a star posting this I've had a mear trying to figure this out, have you posted any others about how this control panel works? thanks donna x need to know few things like how to run what the other buttons do, eco something?
This means you have a fault.... Check the tub level is higher than the two metal looking dots inside the spa.... Also remove your filter as there's a flow switch inside the heater that won't trigger if the resistance is too high in the flow circuit..... Hopefully this helps for you
@@steveholland791 hi. Yes. The heater pump was blocked inside. The grate at the bottom of the tub had a couple of plastic slats missing and it had sucked up a pair of goggles which got wedge in the pipe before the heat pump. The chap said a common fault on the Chinese models ! Hope this helps.
I know this video was years ago but just wondering if anyone knows what an E1 error would be and how to fix it please? This video helped me 3 years ago and spa has been fine up until this time, had not been used for about 3 months and now I’ve turned it on and have E1 on my screen. Thank you
Ben Stanley nun of the icons flash, only the pre heat which normally would stop when it starts. Water level was a problem once before but once i realised how to fix it it’s never been a problem since.
Many thanks for this Richard, clear and precise simple instructions......and it works too!,, 🙏
How do i change the water?
Any idea how you clear the preset cleaning cycles? Or reset the controls totally?
Mine seems to be fine for a while then using a kw of electric for half an hour every hour! Getting expensive!
Turning it off and leaving it off doesn’t clear the memory.
Cheers
how do I get the temperature from 35 degrees down to 28 degrees? How do I set that up? I'm desperate with the settings.
My hot tub won t go past 22c even though it’s set for 38 c
Hello can you help me please … my cleaning cycle only works in stand by mode … and when it’s in that the temp does not work so the heat drops … can’t I have both at the same time heat control and cleaning cycle????
Thanks Richard, I don’t suppose you can tell me what the E 2 error code means please ?
Life saver! Thanks!
This video has been incredibly helpful thank you. I wondered if anyone on here had any idea where I can source a new screen for this spa. Mine is dying 🥲
Hello... I m Susana of Uruguay I need to chance de our to iniciate te preclenear What I do ? Where is de boton of Clean the memory ?
Hi i have recently purchased 1 of these controllers for a chinese hot tub, but on fitting and turning on the tub clicks on power up, and the display back light is slightly back lit but no display icons, any ideas as to where and what to check?
the old panel lost display but showed power via a red panel light eastern spa/ majestic approx 2006
I’ve had my Chinese tub for about 13 years and it’s great. But I can’t seem to turn off the circulation mode. I know it says press the MHz button but it doesn’t do it. No button will remove the symbol and the word “on” any ideas??? Thank you .Al
Hi did you ever solve this. I have the same problem. Thanks
I must have done because it’s ok now. But I cant remember how I did it.
You're a god send. Ive been trying to decipher the very badly written instructions for weeks to no avail. Can you explain the pre heater seatings or do I not need this feature. My tub won't reach the temperature I've set it to and will only get to around 22 degrees before it starts dropping again. Ive put a brand new pump, control panel and heater on but still the same thing is happening. Can you help?
Ewan Crossman Did you solve your problem? I’m having issues with control panel buttons not working on mine
Pathetic long winded control panel. Geez i hope they have something better lol
Hi richard thank you for such an informative video but im trying to set the time but the words cycle are on the screen and the filter circle is on the bottom and has been like this for a few days and it wont let me set the time do you know what i should do please ? Tia
My spa only the blower works . The pumps are not working , they flash but doesn't start. when i press on 1 , 2 or 3
Hi. Did you ever figure this out?
your a star posting this I've had a mear trying to figure this out, have you posted any others about how this control panel works? thanks donna x need to know few things like how to run what the other buttons do, eco something?
Donna Sims hi did you work out all the settings all work and how to leave the tub so it stays warm for next use
Hola yo no puedo borrar y volver a colocar un horario nuevo para algunos ciclos.
Can anyone help me with the preheat button. ? Continuous flashing and doesn’t turn solid so doesn’t heat up ? Many thanks Mike.
This means you have a fault.... Check the tub level is higher than the two metal looking dots inside the spa.... Also remove your filter as there's a flow switch inside the heater that won't trigger if the resistance is too high in the flow circuit..... Hopefully this helps for you
Hi. Did you ever figure this out? Got same problem! Thanks
@@steveholland791 hi. Yes. The heater pump was blocked inside. The grate at the bottom of the tub had a couple of plastic slats missing and it had sucked up a pair of goggles which got wedge in the pipe before the heat pump. The chap said a common fault on the Chinese models ! Hope this helps.
I know this video was years ago but just wondering if anyone knows what an E1 error would be and how to fix it please?
This video helped me 3 years ago and spa has been fine up until this time, had not been used for about 3 months and now I’ve turned it on and have E1 on my screen.
Thank you
Adam Lander it’s the water temperature sensor
Ben Stanley no, I’ve had that before but very simple fix. I have power and all my functions but nun of the pumps or jets will work.
Only other thing I can think of is the water level sensors is your pump icons are flashing that’s usually the problem
Ben Stanley nun of the icons flash, only the pre heat which normally would stop when it starts.
Water level was a problem once before but once i realised how to fix it it’s never been a problem since.
Thanks so much for this - my chinese instructions were useless (maybe except to someone chinese!).
😢
If this is a hot tub I have the same one