BMW F10 Android screen upgrade

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ • 102

  • @keewayx
    @keewayx 4 роки тому +4

    Wow, nice work! Your channel is gold for the f10 drivers💯💯
    If you have the basic music stereo it would be awesome a subwoofer tutorial or something!
    Thank you !

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому +2

      Thanks. I just added HK front speakers and tweeters a few months back. Its better than the stock speakers but thats about it. Looking at a proper b&w with amplifier..... :)

  • @perm8303
    @perm8303 4 роки тому +2

    Very good Work !
    But If you look into the video at 8:20 after installing the pink connector , In same harness there is also a flat black connector with 4 wirings
    What is this connector attached to ? Or is it left unused ?

  • @TheCytostatic
    @TheCytostatic 2 роки тому +2

    Hi mate.
    I did this myself, using your video as a guide. Works very well, except for the reverse camera. I guess it is about wiring, but cant figure out what I did wrong. There are 4 wires on the connector, and I tried every combination, but still cant find where to connect camera power and ground. What are the wires for reverse light? Any tips appreciated.

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому +1

      Hi TheCytostatic. Do check out 3:55 when u connected the cables. I'm sorry I can't remember much as it was so long ago.

  • @mcritepcht5956
    @mcritepcht5956 4 роки тому +1

    Hi bro nice job, I think at the end you put an aux cable to the armrest but where this cable is gonna be connect on the other side ?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому

      Thanks Mcrit. The aux cable connects to the android set female aux input in the wiring harness. Sorry I missed that one. :)

    • @mcritepcht5956
      @mcritepcht5956 4 роки тому

      @@NETTNETTCLUBVIDEOs ok i got it because I saw in that aux female already have an auxinput have you take out that one then connect the Android auxoutput?
      Does your original function still work fine? Thanks a lot I thinking about install one for my car but I don’t really know about it lol

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому

      @@mcritepcht5956 Yes. Its actually quite easy don't worry. I saw a few clips too before buying. Glad i got it to work :)

  • @bogdanbalulescu
    @bogdanbalulescu 4 роки тому +1

    Hi, where did you buy the left hand side boot box? thanks

  • @arthurdorianamoakon4033
    @arthurdorianamoakon4033 4 роки тому +1

    Hey
    Thanks for the video
    Can we have a link to get the radio

  • @brand1986s
    @brand1986s 9 місяців тому +1

    Hello,
    How to make the android screen work when stationary, without the ignition on? It turns off when the ignition is off

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  9 місяців тому

      Hi. It's supposed to work this way. There will be no power with the ignition off.

  • @sessiondrummer
    @sessiondrummer 3 роки тому +2

    Thanks Benny - final question! Have you got this to work with Apple CarPlay? I’ve installed it but it doesn’t seem to have a CarPlay option. Thanks 🙏🏻

    • @2raaas
      @2raaas 3 роки тому +2

      Does yours have a zlink app? You use that with CarPlay I think.

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому +1

      yes

  • @thealumenta
    @thealumenta 3 роки тому +1

    Hi, i have installed the head unit but it seems, it doesn't have any apple carplay neither Android Auto... how do you activate the Android Auto and Apple Carplay?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi. You can check out my video list. There is 1 video on the functions.

  • @ericjr2639
    @ericjr2639 3 роки тому +1

    Wow, you gained yourself a new subscriber, your channel is absolutely brilliant for F10 drivers. My screen has been damaged and now has a permanent orange screen of death, was thinking to buy an android screen like yours and fit. My only question is, are you still able to view the regular iDrive features such as vehicle status, oil level, brake pads replacement, etc... hopefully you get back to me as it's the only think stopping me from buying it. Again awesome video!

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому +2

      Hi Eric. Thanks for the support. Just go for it man. Much better then the original screen and yes it is able to view the old screen options.

    • @ericjr2639
      @ericjr2639 3 роки тому

      @@NETTNETTCLUBVIDEOs thanks alot for the swift response, all I needed to know! Please keep it up!

    • @gib8891
      @gib8891 3 роки тому

      @@ericjr2639 Have you bought it already, and are you happy with it?

    • @ericjr2639
      @ericjr2639 3 роки тому +1

      @@gib8891 yes I have, installing it was easy until I had to fit the screen unit back into the dashboard, it was probably the hardest part as in my f10 there wasn't much space, but other than that it's perfect, make sure the antenna is where he placed it, I first tried to hide it in the glove compartment but then the GPS didn't work. Hope it helps.

  • @jayhusayn6792
    @jayhusayn6792 3 роки тому +1

    Hi benny. Does bmw map display full screen on the android screen, thanks

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Jay! Sorry mily bimmer doesn't come with navigation. But the android screen has map function and it is full screen. Hope it helps.

  • @sessiondrummer
    @sessiondrummer 3 роки тому +2

    Hi Benny, quick question - does the in car microphone work with your head unit for phone calls?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Matt. Sorry I don't use that function. But I think it'll work without any issue. This head unit is really a good upgrade for the f10.

    • @sessiondrummer
      @sessiondrummer 3 роки тому +1

      Yes mine works with the in car mic :)

  • @ArilConstruction
    @ArilConstruction 2 роки тому

    Hi mate, how to do factory reset for android 11,problem with Launcher, Thanks

  • @sammoonsuhail2013
    @sammoonsuhail2013 3 роки тому +1

    Hi I connect same as you say but don't have display working

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому +1

      Hi Sammoon. You might want to try press and hold the menu button on the idrive.

    • @sammoonsuhail2013
      @sammoonsuhail2013 3 роки тому

      I buy a android dear can I have you what's up number so I can send the photos pls help me on

  • @warhero720s
    @warhero720s 3 роки тому +1

    Hi Benny. Is this a plug and play? Do you need to code it? Also does everything else work like usb mp3 & mp4 playback, as same as the original one? Thanks again.

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Nurul. Yes it is plug and play. ou can toggle from the android screen and the android screen. All existing functions will still be there.

    • @warhero720s
      @warhero720s 3 роки тому

      Thanks for the reply. Im thinking of getting one as the pro nav screen in my car has a small blue line from led leak inside the screen. BMW quoted me over £2000 to replace it. I said I think I'll buy an android system & they said ok but it needs to be coded & they will not be able to do it at any bmw if I buy a different system. What a joke!.. £2145 to get it sorted lol.
      Anyway many thanks for your video 👍🏽

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      @@warhero720s oh my... £2000. That could get u a few android screens and outlast the car even haha! Have fun diy! It's really easy .

  • @bboytrez
    @bboytrez 4 роки тому +1

    thank you for this.!!!

  • @lerwicklad116
    @lerwicklad116 5 днів тому

    I have cic and my bluetooth currently works with my original screen. Do i need to connect the aux cable when installing new android screen?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  5 днів тому

      @lerwicklad116 hi. I think you'll still need it cos that's where the android audio is connected to.

  • @deividas3313
    @deividas3313 2 роки тому +1

    After installation idrive controller and climate controll not working, any ideas?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      Hi Deividas. There must make been a missing plug or connection. You can try to reinstall the old screen back and see if everything works.

    • @deividas3313
      @deividas3313 2 роки тому

      @NETT NETT CLUB I just figured out that my lvds cable are 4pin and the android tv 6pin, so its probably not gonna work properly? Maybe there is some 4pin to 6pin connector?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      @@deividas3313 Maybe you have selected your android screen wrongly? 4 pin should be CIC and 6 pin NBT. I'm not sure about this though. Check with the seller who sold you this screen. They'll know better.

  • @cliffordfernandes8026
    @cliffordfernandes8026 2 роки тому +1

    Bro wch 1 to select cic 4 Or nbt 6 ...??

  • @vishalbhavnaani901
    @vishalbhavnaani901 Рік тому +1

    Do we need to use the aux cable and do we need to use the GPS

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  Рік тому

      Hi Vishal. Yes we do. Aux is for the audio coming from the android, GPS is for navigation.

  • @davidjames3502
    @davidjames3502 2 роки тому +1

    Hello I have no sound and I've lost the scrolling functionality of my idrive. Can you advise?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      Hi David. For sound you will need to look at the aux cable going into the centre armrest. Select external device on idrive. As for your idrive issue, most likely it is a wrong connection somewhere. Please double check.

    • @davidjames3502
      @davidjames3502 2 роки тому

      @@NETTNETTCLUBVIDEOs Hi, thank you for the reply. Everything seems to plugged in where it needs to be. Aux cable is plugged in inside centre armrest. Should I have made a change to the external audio source (aux) before changing the unit?

    • @thejoker6111
      @thejoker6111 2 місяці тому

      I am experiencing a lack of signal, and the iDrive system is not functioning. Could you kindly assist me in resolving this issue

  • @konel6608
    @konel6608 3 роки тому

    Hello. What resolution has the navigation ?

  • @ivanh8021
    @ivanh8021 2 роки тому

    hello.. i have problem with videos on youtube. on my radio the image is half the screen or less. how can i get a full screen picture? I'm talking about UA-cam. on a couple of videos there is a picture of how it should be, but on most it is not even close.
    I tried changing the resolution in the settings, but it's only for the home screen, it doesn't affect android.

  • @gooorgjooon
    @gooorgjooon 2 роки тому +1

    What will happen if I don't connect aux wire

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому +1

      Hi Gooorg. The aux cable is for the audio of the android screen.

  • @libero244
    @libero244 4 роки тому +1

    Will you still be able to operate the original bmw idrive functions?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому

      Yes James. All good don't worry :)

    • @mohammeda4672
      @mohammeda4672 Рік тому

      Will the oringnal idrive function appear as a small display as the original display was small?

  • @jonsmis1416
    @jonsmis1416 3 роки тому

    Does the links you provided are sponsored? If you have commission for buying items using your links I will use them, as a small thanks for that video.

  • @Ameliaeastman1992
    @Ameliaeastman1992 3 роки тому +1

    Hi do u need to code anything or is it just plug and play

  • @jerrysgraphics7062
    @jerrysgraphics7062 2 роки тому +1

    how much the price Malaysia...

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      Hi Jerrys! I got it at around $400 SGD so it should be around RM1200.
      You can purchase it this link s.click.aliexpress.com/e/_A2keWP
      You might want to check out the 12.3 inch screen too s.click.aliexpress.com/e/_AeEyB7

  • @mc9022
    @mc9022 2 роки тому

    I got the retrofit amplifier from lq audio and that come with a harness , how i will be able to change my screen with a second harness ?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      Hi MC90. Sorry i do not have any information on this. Perhaps you can check with your amplifier supplier or your screen seller.

  • @sotwii9
    @sotwii9 3 роки тому

    Thanks so much it was very helpful💐💐💐
    I installed it as you described except I don't have camera... But when I turn the screen on there is no sound at all even when I play UA-cam!!
    When I switched it to its original system and turn the radio on the sound was perfect!!
    Please tell why there is no sound when I play the android screen??!

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      have u connected the aux cable?

    • @alwisalwis5536
      @alwisalwis5536 3 роки тому +1

      @@NETTNETTCLUBVIDEOs so thats mean you have to connect the screen to car aux? Screen doesn't have he's own audio output?

  • @macchiatomoments
    @macchiatomoments 4 роки тому +1

    Hi Benny, your links are not working. Thank you for this video!

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому

      Welcome. Have edited pls try again. Do let me know if it's still not working. Thanks macchiatomoments!

  • @2raaas
    @2raaas 3 роки тому +1

    I cant see the original idrive screen on mine. Says no signal. Any ideas what's wrong? Also the backup camera flickers and only stays on for a few seconds.

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Did you plug everything in accordingly? Back camera might be interference. U can try to change to a led reverse light bulb. It worked for me. Check out my led video.

    • @2raaas
      @2raaas 3 роки тому

      My problem was I ordered CIC when I have NBT. Weird that because my idrive layout isnt like NBT layout. The selected function has a box round it(CIC style) not a filled in colour. If you have an lvds plug that has 6 pins (4 in a round shape and 2 in a rectangle shape) then you have NBT. CIC only has 4 pin lvds cable.

    • @2raaas
      @2raaas 3 роки тому

      @@NETTNETTCLUBVIDEOs I'll try the LED bulb when my nbt unit comes, if I'm still getting problems. Thanks

    • @tuncaybaran4365
      @tuncaybaran4365 3 роки тому

      @@2raaas does everything work now?

    • @2raaas
      @2raaas 3 роки тому

      @@tuncaybaran4365 yes everything works now. But the reverse camera still had problems when the NBT replacement came I disconnected the positive that was wired to the reverse light and taped it up and the reverse camera started working properly

  • @Fizzo99
    @Fizzo99 3 роки тому

    Where did you plug the aux cable in the monitor?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Fizzlee. I plug it into the wiring harness for the android screen.

  • @gopisam1498
    @gopisam1498 2 роки тому

    Wer is your shop in Singapore

  • @jacke4697
    @jacke4697 2 роки тому +1

    Nice guide but why you wear face mask working in your car?????

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  2 роки тому

      Thanks Jack! This video was done in 2020 and the rules/ restrictions in Singapore are a little different here : /

  • @thedenpogi
    @thedenpogi 4 роки тому +1

    How long did the install take?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому +1

      Hi there! It took me like few hours to install as it was my first time doing it. Not really rushing though 😉

  • @sessiondrummer
    @sessiondrummer 3 роки тому

    Great job - I'm about to install one of these into my F10. Quick question - do I need to install the GPA receiver or does the harness plug into the current SATNAV system already fitted into the car?
    Cheers!

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Thanks Matt. Sorry I'm not sure about that. Mine doesn't have GPS as standard. So when i plug it in, it works. You might want to install it just in case.

  • @Ameliaeastman1992
    @Ameliaeastman1992 3 роки тому

    Do u need to code any thing for this to work or is it plug And play plz

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Amelia. There are no codings required. Just follow the video will do. You can just purchase it off the link in the description. Hope it helps.

    • @Ameliaeastman1992
      @Ameliaeastman1992 3 роки тому

      It says for 2011-2016 mines 2010 will it still work Amd thanks for the reply

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      @@Ameliaeastman1992 mine is also 2010 F10. 2010 might still have E60. U msg and ask the seller better. Just click on the link in the description.

  • @arthuranyakwo6849
    @arthuranyakwo6849 3 роки тому

    I just installed this new android screen without the camera as I don't need it. But the bmw idrive is not working when l try to switch to it. The android is working fine. What am I doing wrong. Please advice

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Arthur. You can try press and hold the menu button to toggle between the android and i-drive. If not you have to msg the seller you got it from.

  • @bcmengs
    @bcmengs 4 роки тому +2

    I am planning on the installation myself. Now there is this stand out 12.3” that I am eyeing at. On AliExpress I can get it around rm2k before tax (god knows how much the tax will be).
    There are workshop who offers the same model with installation + 1 year warranty for RM2.9k. What’s your gut says about it? Mine is a 2011 F10, so it’s also a CIC unit but mine is with bigger screen currently.
    My current unit already have AUX in my centre console box and with GPS built in, do I still need to install additional GPS antenna like your video?

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  4 роки тому

      I suggest you DIY Paul. You can see from my video it is relatively easy. I've seen the 12.3 inch too. Looks sooooooo tempting 😈

  • @karolispetrauskas5063
    @karolispetrauskas5063 3 роки тому

    You didn’t show us how your parking camera works :/

    • @NETTNETTCLUBVIDEOs
      @NETTNETTCLUBVIDEOs  3 роки тому

      Hi Karolis. It is in another video showing the functions.
      ua-cam.com/video/Yqby-Kslaho/v-deo.html