THANK YOU. You tested my patience by your extremely calming voice being the complete opposite of my rather stressful state due to the unpaired microphones, but we got the result in the end. So truly, thank you!
THANK YOU ! I watched multiple other videos before I got to yours and they weren't explaining this vey well at all, I'm afraid. You explained it perfectly.
Thanks very much for your instructions; I have been filtering the Internet for weeks in search of the way to re-pair the Rode Wireless Go 2 System, in case the pairing get disconnected ... ! It's a pity that these days products are thrown to the market without proper instruction manuals or videos !!! It took me only seconds to get the Rode system re- paired after watching your instructions !! Once again, MANY THANKS !!!
My pleasure it seems this is a huge issue for a lot of people, as it was for me until I worked it out. Glad you are up and running again, as you say just a shame such a brilliant product doesn’t have the best information or support available. Perhaps I should ask www.rode.com for a job.
@@nasserdhaghriri6345 I do keep mine updated. Always a good idea to keep them up to date. Just connect the receiver and each mic in turn to the app on your pc or Mac to update them. 😊
Hi creator friends! We just wanted to say, this may also happen IF your device is not updated! The solution you wonderfully shared did not work for us at first so we connected our device to the computer and opened Rode Central where our device was updated. Afterwards, they automatically paired! Whew! Hope this extra info helps! Thank you, Dan's Car and Music Studio!! :)
Yes this is the next step if my advice does not work. Many people also make the mistake of not updating the transmitters (microphones) but just the receiver. As you say all 3 parts of the Rode Go 2 must be updated on the Rode Central App on a PC or Mac.
Thank you very much! Ridiculous that Rode themselves don't give this info anywhere. I lend these sets out to students on a daily basis, so they just need to work flawlessly. I got a set back the other day and it took me this whole afternoon to finally find this video, which solved it in less than 10 seconds!
Really glad it helped you. As you say crazy that Ride don’t put this info anywhere. If you use a lot of recording and film equipment you might want to subscribe to my channel as I am planning many more short videos with hints and tips on using various bits of equipment.
Your video has been a real lifesaver, I was about to send them back to amazon! RODE should put this in their instructions, which didn't even include details of the companion app for updating or accessing recordings via a phone..Just Crazy!
Really glad it helped you seems so many people have this problem. It amazes me that such a pricey piece of “professional” quality kit does not come with a proper manual. The microphone system itself is brilliant but the support and instructions leave a lot to be desired.
@@danscarchannel5367 Do you have any tips on improving the sound in terms of EQ to help boost the voice and how it sounds, I find its okay but makes people I know sound slightly different
Thank you! Had a hyflex university class go pear/pair shaped on me today because I didn't know this. Not sure how I lost the pairing. The Go units are so reliable usually that I have utterly taken their functionality for granted.
What a nightmare they always unpair at the most inconvenient times!! Glad the video helped you sort it out. If you haven’t already it’s worth connecting all three parts of the system to the Rode Central App on your Mac or PC and updating the firmware. This will help prevent it disconnecting unexpectedly. Please subscribe to my channel as I will upload more helpful tips in the future. 😊
@@pokarier Cool and thanks for Subscribing to the channel. Apologies I put Rode Connect App it’s actually called Rode Central App. Also make sure you update all 3 parts one after the other (ie the transmitter and both Microphones) All the best Dan 😊
Thank you so much! I lend it to someone else and when I got it back it was disconnected, been thinking how the heck to reconnect it again! I can finally use it again~
ohhh thank you so much!!! i was about to throw them out the window. i was at a shoot and they just got disconnected and everybody was saying press once rather than double click. the one receiver was connecting but the other one wasnt. I managed to get the job done with a different setup.... Thank you again.
thank you!!!!!!!!!!! i was struggling with this and rode hasn't reached back to me in 3 days. rode should pay you for this! in the manual all i see is pictures with numbers but zero explanation with words hahahaha!
top notch video. have you ever had issue with one of the transmitters refusing to power on? i can see it isnt dead when plug into rode central, but its button does nothing
Hi not had that issue before. May be stating the obvious but is the transmitter fully charged? If it is try to re-download the latest update through the Rode Central App and hopefully that should reset it. 🤞
@@danscarchannel5367 I found the issue - on the last firmware update one of the transmitters somehow wasnt 'right' afterwards with no warnings. i had to perform a factory reset on both transmitters and the receiver using the desktop version of Rode Central.
No worries Martin glad it helped. Also worth updating the firmware on both mics and the receiver if you haven’t already using the Rode Central App on your Mac or PC 😊 Please subscribe to my channel as I will be adding more Rode videos.
Thanks. I tried to pair them back many times and followed many videos, but didn't work. What you say to DOUBLE CLICK the power button on the transmitter, is the solution. If I single click the power button as it says in the product instructions, it doesn't pair.
The solution is to update the receiver and the two mic/transmitters using the Rode Central app on your PC or Mac. Once updated all will pair again properly 😊
Yes you need to update all three parts the transmitter and 2 microphones one after the other using the Rode central app on your laptop or Mac. Once done all will work fine again 😊 good luck!!
I am selling my Rode Wireless Go II. Yesterday they would not pair, I followed these steps and other suggestions to make them pair. This morning some d-head told me I was doing something wrong. I turned them back on again and they are magically paired. PM me if you wanna buy.
Hi mate, Unfortunately this didn't work for me. I've tried countless amout of times, my transmitters were paired out of the box and upon updating them to the new firmware on my macbook they seem to now not connect.
Hi after updating the transmitter did you connect both Recievers to the Mac to update them too. If I remember rightly you have to sync them with the app…..
@@danscarchannel5367 hey mate. So I updated the receiver and not the mics as you say. Once both updated they connected automatically without even needing to reconnect. Cheers !
If the method in the video does not work you will need to connect both transmitters and the reviver one at a time to the Rose Central app through your PC or Mac and update the firmware on each item. Once you have done this they will pair again 😊
I haven't used my ones in a few months and when I switched them on they wouldn't pair. I factory reset them all, ensured I am on the latest firmware (2.1.9 - I was), and somehow both transmitters paired on channel 1 (ARGH!) I am trying to power on 1 transmitter and unpairing it, it flashes once when I unpair and instantly repairs seemingly. The wireless light is steady at least, but it doesn't show on the receiver. If I then restart the receiver, it shows it is paired. I cannot for the life of me get it to unpair, any ideas?
Hi when you updated the firmware did you update the receiver and both transmitters? You have to update each one separately. If you do that all should be ok 🤞🤞
@@danscarchannel5367 Yes, I updated each one separately one by one and also tried factory resetting. Each one shows 2.1.9 when connected to Rode Central.
That’s really strange maybe the update got corrupted somehow?? Might be worth trying to update the firmware on each one again and see if that helps?? If not the you will have to contact Rode directly for support.
@@danscarchannel5367 There's no option to explicitly update the firmware, but when I do a factory reset, it says it reloads the firmware, I tried that a couple of times on all of them :( - filled in a support request with Rode, will update once they reply.
Hi Griffin Have you tried to connect the mic and receiver to your Mac or pc and update them using the Rode app? 9 times out of 10 this will fix any problems. Make sure you update both mics and the receiver though. Once done they should connect automatically !! Good luck 🤞
@@danscarchannel5367 man, i lost more than one hour yesterday to stuggle with the app to do factory reset seceral times lol, i gave up. thank you again
Hi Mattia you must update the two mics as well as the transmitter or it will not work. Simply connect each mic in turn to the Rode Central app and once all three parts are updated the system will work again 😊
Delete the app on the computer and re-download it. Then connect the transmitter and update it followed by the 2 mics. Once all 3 updated should all work and pair normally. Hope this helps 🤞
THANK YOU. You tested my patience by your extremely calming voice being the complete opposite of my rather stressful state due to the unpaired microphones, but we got the result in the end. So truly, thank you!
Really glad it helped. Until I learnt how to do this I was not calm at all I can assure you!!
OMG!!! After the hours looking to resolve the issue, I found the solution!!!! Thank you!!!
You are most welcome 😊
THANK YOU ! I watched multiple other videos before I got to yours and they weren't explaining this vey well at all, I'm afraid. You explained it perfectly.
So glad this helped you and thank you for your kind words 😊
Thanks very much for your instructions; I have been filtering the Internet for weeks in search of the way to re-pair the Rode Wireless Go 2 System, in case the pairing get disconnected ... !
It's a pity that these days products are thrown to the market without proper instruction manuals or videos !!!
It took me only seconds to get the Rode system re- paired after watching your instructions !!
Once again, MANY THANKS !!!
My pleasure it seems this is a huge issue for a lot of people, as it was for me until I worked it out.
Glad you are up and running again, as you say just a shame such a brilliant product doesn’t have the best information or support available. Perhaps I should ask www.rode.com for a job.
You saved my life!!! We have a conference tomorrow I was struggling here.
So glad it helped you Nasser 👍
were your unit updated when you did this ? does updating units matter?
@@nasserdhaghriri6345 I do keep mine updated. Always a good idea to keep them up to date. Just connect the receiver and each mic in turn to the app on your pc or Mac to update them. 😊
Succient, simple, kind and short. All the things I look for in instructional videos. Thank you!
Thank you for your kind words. Really glad you found it useful 😊
It worked!!! Thank you!! Before I found this, I was unable to re-pair my set.
So glad it helped you 😊 don’t forget to subscribe to my channel for more tips and fixes.
Hi creator friends! We just wanted to say, this may also happen IF your device is not updated! The solution you wonderfully shared did not work for us at first so we connected our device to the computer and opened Rode Central where our device was updated. Afterwards, they automatically paired! Whew! Hope this extra info helps! Thank you, Dan's Car and Music Studio!! :)
Yes this is the next step if my advice does not work. Many people also make the mistake of not updating the transmitters (microphones) but just the receiver. As you say all 3 parts of the Rode Go 2 must be updated on the Rode Central App on a PC or Mac.
this was the best video. No one else explained this but you. Thank you!!!!!!!!!!!!!
Glad it helped you Richard !! 😊
Thank you very much! Ridiculous that Rode themselves don't give this info anywhere. I lend these sets out to students on a daily basis, so they just need to work flawlessly. I got a set back the other day and it took me this whole afternoon to finally find this video, which solved it in less than 10 seconds!
Really glad it helped you. As you say crazy that Ride don’t put this info anywhere.
If you use a lot of recording and film equipment you might want to subscribe to my channel as I am planning many more short videos with hints and tips on using various bits of equipment.
Rode* even
Your video has been a real lifesaver, I was about to send them back to amazon! RODE should put this in their instructions, which didn't even include details of the companion app for updating or accessing recordings via a phone..Just Crazy!
Really glad it helped you seems so many people have this problem. It amazes me that such a pricey piece of “professional” quality kit does not come with a proper manual. The microphone system itself is brilliant but the support and instructions leave a lot to be desired.
@@danscarchannel5367 Do you have any tips on improving the sound in terms of EQ to help boost the voice and how it sounds, I find its okay but makes people I know sound slightly different
This double click instruction is never described. Thank you my friend!!
My pleasure so glad this is helping so many people 😊
Thanks! Video starts at 02:10
Glad it helped mate
As simples as perfect. Thank you. Better than Rode's official info.
My pleasure Felipe 👍
Thanks a lot!! I just bought this setup & was confused for a good 15min. Appreciate this vid!
Glad it helped 👍
Thank you! Had a hyflex university class go pear/pair shaped on me today because I didn't know this. Not sure how I lost the pairing. The Go units are so reliable usually that I have utterly taken their functionality for granted.
What a nightmare they always unpair at the most inconvenient times!! Glad the video helped you sort it out.
If you haven’t already it’s worth connecting all three parts of the system to the Rode Central App on your Mac or PC and updating the firmware. This will help prevent it disconnecting unexpectedly.
Please subscribe to my channel as I will upload more helpful tips in the future. 😊
@@danscarchannel5367 thank you! I’ll do as you suggest with the connect app. Thanks for the really helpful content. Subscribing now! cheers!
@@pokarier Cool and thanks for Subscribing to the channel. Apologies I put Rode Connect App it’s actually called Rode Central App. Also make sure you update all 3 parts one after the other (ie the transmitter and both Microphones)
All the best
Dan 😊
thank you! this is sooo helpful, i did not realised that there is a double tap function on the mics to get re - paired
Really glad it helped 😊
thank you for this video, solved my problem too :)
So glad it helped 😊
Hey Dan, you save my day dear. Thanks thanks thanks a ton ..
You are my hero. Thank you. I couldnt figure this out. I was so frustratied. Thanks again
You are most welcome. So glad it helped you!! It seems nobody can work this out.
Thanks a million, Dan, it was getting really frustrating trying to figure this out. Your video helped alot.
Really glad it helped 👍
Thank you so much! I lend it to someone else and when I got it back it was disconnected, been thinking how the heck to reconnect it again! I can finally use it again~
I’m so glad this helped you 😊
Thank you! You saved my day.
Glad it helped Lari 👍
Thank goodness for your brilliant video!!!! Thanks - I thought I had bought a lemon!!!
No problem, I’m glad it helped you. Can’t believe that Rode don’t show this in the “manual”. Thank you for subscribing too!!!
You saved me. Thank you so much.
No problem, glad it helped !!
Thank you my dear friend for the beautiful explanation
You are most welcome 😊
This saved me - great vid!
Glad it helped Evan 👍
Very useful - thanks. Just had this problem and couldn't figure out the way to re pair them again.
Hi Andrew glad it helped 😊
Phew!! Thanks a TON Dan!!! You Rule!
Glad to help David 👍
Just saved me, thank you very much!!!
You are most welcome
Thank u so much!!!
Glad this helped you 😊
Thank you so much!!
I thought I'd broke the thing after a week of use 😅
No worries Andy glad it helped mate 👍
it was very helpfull! i tought that one of microphone is broken. Thanks
Glad it helped 👍
Legend! Saved me.
No worries Joel glad it helped 😊
ohhh thank you so much!!! i was about to throw them out the window. i was at a shoot and they just got disconnected and everybody was saying press once rather than double click. the one receiver was connecting but the other one wasnt. I managed to get the job done with a different setup.... Thank you again.
So glad this helped you and you got the job done!! 😊
Thank you! I would have sworn one of my transmitters was defective until I saw this.
So glad this helped you seems many people are having this same issue.
thank you
My pleasure glad it helped you 👍
Thank you, did the trick!
Glad it helped you 👍
Problem solved, thanks Dan
Glad it helped you 👍
Thx just what I was looking for
Best video so far. I though mine was broke
thank you!!!!!!!!!!!
i was struggling with this and rode hasn't reached back to me in 3 days. rode should pay you for this! in the manual all i see is pictures with numbers but zero explanation with words hahahaha!
So glad it helped you the manual is pretty useless !! Have a good Christmas and New Year !!
thank you soo much! super helpful
So glad it helped you Belinda 😊
Thank you very much, this is helpful 👏🏾. Been trying to film then it disconnected,very infuriating
Super helpful!
Glad it helped 👍
Huge thank you Dan the man!!!!
My pleasure glad it helped 😎
Thank you, this is very usefull!
My pleasure glad it helped 😊
Thank you, this was doing my head in. You’re a star. Subbed and thumbs up given.
Thank you glad it helped. Was watching a few of your videos keep up the great work. You also have a new subscriber 😊
Thank you. This worked for me 😊✌️ great, but you really gotta know that one.
You are very welcome Sacha 😊
Genius! Exactly what I needed
Great stuff glad it helped!!
wow, you saved my life right now!! thank you so much for share this tips!!
Glad to help 😊
top notch video.
have you ever had issue with one of the transmitters refusing to power on? i can see it isnt dead when plug into rode central, but its button does nothing
Hi not had that issue before. May be stating the obvious but is the transmitter fully charged? If it is try to re-download the latest update through the Rode Central App and hopefully that should reset it. 🤞
@@danscarchannel5367 I found the issue - on the last firmware update one of the transmitters somehow wasnt 'right' afterwards with no warnings. i had to perform a factory reset on both transmitters and the receiver using the desktop version of Rode Central.
Merci bcp
Top ça fonctionne très bien
vous êtes les bienvenus! 👍
Thank you so much sir
My pleasure glad it helped you 😊
Thank you very much..
Really glad it helped 😊
Thank you sir 🥰🥰🥰
My pleasure 👍
THANK YOU! 🙂
You are welcome 😊
Thank you!
My pleasure glad it helped 👍
Thanks so much!!
No worries Martin glad it helped.
Also worth updating the firmware on both mics and the receiver if you haven’t already using the Rode Central App on your Mac or PC 😊
Please subscribe to my channel as I will be adding more Rode videos.
Thank you so much! That indeed was super helpful!
No problem so glad it helped you 😊
amazing!! cheers mate! what a life saver
Glad it helped mate the manual is useless !!
That was super helpful ! Thanks a lot.
Really glad it helped you 😊
thank you!
Glad it helped you Shane 👍
Thank you 😘
My pleasure, glad it helped 😊
Thank you 😊
You are welcome 😊 glad it helped !!
Thank you
You are welcome! Glad it helped 👍
Thank you so much!! it Worked!
So glad it helped you !! 😊
So glad it helped you !! 😊
great! thanks!
No problem glad it helped 👍
Thank you! I already thought they died....
My pleasure glad it helped you 👍
than,ks budddy !!!
You are welcome Samo 👍
Grateful 😊
Your welcome …. Easy when you know but a nightmare when you don’t !! 😊
thanks
My pleasure glad it helped you Scott
very helpful!
Thanks. I tried to pair them back many times and followed many videos, but didn't work. What you say to DOUBLE CLICK the power button on the transmitter, is the solution. If I single click the power button as it says in the product instructions, it doesn't pair.
Really glad this helped you Roy.
This appears to be the solution for many, but what should I do if its still not pairing?
The solution is to update the receiver and the two mic/transmitters using the Rode Central app on your PC or Mac. Once updated all will pair again properly 😊
thank you for your video but for me it does work for the first microphone not the second microphone ... Do you have an idea ?
Yes you need to update all three parts the transmitter and 2 microphones one after the other using the Rode central app on your laptop or Mac. Once done all will work fine again 😊 good luck!!
Thanks a lot. It's done. Incredible that there is nothing in the manual. Greetings from France
@@LucGueugneau my pleasure the manual is not very helpful at all. Glad you sorted it. All the best Dan
Thank you!!
Update the firmware on all 3 units and you should see instant connection!
i love you man
So glad this helped you Matteo 👍
Thanks bro❤️
You are welcome Arun 👍
I am selling my Rode Wireless Go II. Yesterday they would not pair, I followed these steps and other suggestions to make them pair. This morning some d-head told me I was doing something wrong. I turned them back on again and they are magically paired. PM me if you wanna buy.
Hi mate, Unfortunately this didn't work for me. I've tried countless amout of times, my transmitters were paired out of the box and upon updating them to the new firmware on my macbook they seem to now not connect.
SAME HERE. worked out the box and now no longer work after update. Cannot get them to pair.... latest update is faulty???
Hi after updating the transmitter did you connect both Recievers to the Mac to update them too. If I remember rightly you have to sync them with the app…..
Also after updating some only need a single click to pair not a double click … let me know you get on??
@@danscarchannel5367 hey mate. So I updated the receiver and not the mics as you say. Once both updated they connected automatically without even needing to reconnect. Cheers !
SAME! I Updated both Receivers in the App and now they're back again.
Did the video ever start? I left after what seemed to be 10 minutes of faders dancing around.
I had to plug each one in via the USB to update the firmware on all of them, and then they just connected with each other.
Well done yes that is the next step if the above does not work.
Glad you sorted them 😊
dan im doing exactly as you show us how to repair and it not pairing. please help. thanks
If the method in the video does not work you will need to connect both transmitters and the reviver one at a time to the Rose Central app through your PC or Mac and update the firmware on each item. Once you have done this they will pair again 😊
Rode*
I haven't used my ones in a few months and when I switched them on they wouldn't pair. I factory reset them all, ensured I am on the latest firmware (2.1.9 - I was), and somehow both transmitters paired on channel 1 (ARGH!)
I am trying to power on 1 transmitter and unpairing it, it flashes once when I unpair and instantly repairs seemingly. The wireless light is steady at least, but it doesn't show on the receiver. If I then restart the receiver, it shows it is paired. I cannot for the life of me get it to unpair, any ideas?
I recoded a short video here, any advice would be appreciated! < ua-cam.com/video/fqbSWLDaHpw/v-deo.html
Hi when you updated the firmware did you update the receiver and both transmitters? You have to update each one separately. If you do that all should be ok 🤞🤞
@@danscarchannel5367 Yes, I updated each one separately one by one and also tried factory resetting. Each one shows 2.1.9 when connected to Rode Central.
That’s really strange maybe the update got corrupted somehow?? Might be worth trying to update the firmware on each one again and see if that helps?? If not the you will have to contact Rode directly for support.
@@danscarchannel5367 There's no option to explicitly update the firmware, but when I do a factory reset, it says it reloads the firmware, I tried that a couple of times on all of them :( - filled in a support request with Rode, will update once they reply.
I broke my mic a long time ago, but it finally turned on today. Unfortunately it seems like it doesn't pair, so it's still broken 💔😭
Hi Griffin
Have you tried to connect the mic and receiver to your Mac or pc and update them using the Rode app? 9 times out of 10 this will fix any problems. Make sure you update both mics and the receiver though. Once done they should connect automatically !! Good luck 🤞
I didn't know you could do that! Thank you so much for replying to my comment and helping!
@@GriffinTheAdventurer no problem really hope it works 👍
It worked thanks so much!
thx 😀🙂
No problem glad it helped 👍
T H A N K Y O U ! ! ! !
My pleasure glad it helped 😊
@@danscarchannel5367 man, i lost more than one hour yesterday to stuggle with the app to do factory reset seceral times lol, i gave up. thank you again
it still is not seeming to connect, I just updated my transmitter and its not connecting to the mics!
plz help
figured it out! just had to update the mic too
Hi Mattia you must update the two mics as well as the transmitter or it will not work.
Simply connect each mic in turn to the Rode Central app and once all three parts are updated the system will work again 😊
1.75x speed makes it a normal speed
What if the go 2 no longer connect to computer makes the recordings un accessible
Delete the app on the computer and re-download it. Then connect the transmitter and update it followed by the 2 mics. Once all 3 updated should all work and pair normally.
Hope this helps 🤞
not working
Then try connecting the transmitter and both mics to the Rode App on your Mac or PC and update them all. That will cure it 😊
@@danscarchannel5367 thanks
Too long before the video gets to the point. Thanks though
thank you!
You are very welcome 😊
thank you