Steve I just wanted to say Ty for your Channel. I just did my 14 SGS windshield, fang ,rear crown, filler and I saved myself a lot 💰 🤑. I appreciate your Channel Atticus from Detroit
Hey Steve, I watched just about all of your content. I see you purchased 22” extensions I assume for the fork lights, and 8” extensions. What were they used for?
Thanks for the great video. Is there any way you could show where on the heat shield you ended up putting the button/knob for controlling the unit? You indicated the heat shield but the video ended and we didn't get a good finishing shot of the button placement. Thanks again!
I put it on the fire wall not the heat shield. On the right side right behind where your heat shield is on that wall in front of your battery above your transmission. Just stuck it there and really only use it for the on/off function.
Hey man....I am looking into hats now...Ill announce it on the FB page if I get them...This one is from Southern Oregon Baggers. Im checking on prices though.
Have a question..my lihgts were working awesome until I changed the battery on my bike..now my lights stopped working with my bluetooth on my phone..any help would be appreciated..thanks
I noticed you were working on a illinois licensed bike in one of your videos. I'm from illinois do you do installs still? And are you in or near illinois
As you hooked up the channel 2 to run your saddlebags and front fender, the splitter that you mentioned, did it come with the kit or did you purchase it separately? What other than the kit did you purchase to run all the lights? As for this kit, as you add blade lights, machete lights, fairing turn lights, vents lights; and fork lights how can you add them all together so you keep it clean and how do you have all of them come on red when you press the brake?
Its not done through the app, however its a wire from the controller you must connect to the brake wire on your bike. To utilize the brake override function connect loose red wire of the controller to the brake light circuit of the motorcycle using supplied posi-tap connector or other suitable method.
They are bright.. my bike does look great.. just think the kit is way overpriced for what it is.. I expected end caps for where the wires end.. so I could throw dialectric grease and an end cap to keep the connections nice in case of an add on later.. and as nice is the controller cool how you can cycle thru color and function i had to mount it under the seat.. when wiring a switch to the dash would be way cleaner.. and the app sucks because you have to be connected to that and not the Bluetooth radio so you have to switch back and forth if you want to adjust it..zip ties must be from China half of them broke... I just should have looked into light brands before I dumped just over 450 for the 2 kits..
Hey Stephen...sorry to hear about the zip ties and the Bluetooth issue...I never BT my phone to my bike for audio so i didnt notice that..i just load up a thumb drive and plug it in. They are pricey, I agree!
Hey steve I know you've had several led kits on your bike now as far as brightness, useleability, and price which one would you suggest to the budget friendly builder?
well the ciros are definitely the brightest ive used...and had the most options..,.budget friendly you can get the ones I have the video on from amazon...they are decent..I used them for quite some time
there are multiple links all listed below for the whole set up..they break it up in case someone may not want the whole kit...but its totally worth it!
@@sikbaggers I'm just terrified of installing this myself I'm horrible at stuff like this do you think it's easy enough for a guy like me to do this lol
@@pitbullfan1234 Absolutly...everything is plug and play and the wires only go so far as where they get installed. Its more of Tuxedo kit rather than the amazon kits that have 4000 feet of extra wire left over...And the directions are spot on to show you where everything goes. The only two wires you really need to "hookup" are the power and ground to the battery. Everything else is a breeze.
@@sikbaggers how many amps/ power does that entire 3 piece kit use? I've already got 4 amps, 8 speakers, lots of other running lights, heated grips, heated seat, fog lights, lighted mirrors, saddlebag lights, .on my 2017 ultra limited. I'm at max now with a light kit but it needs replacing. so I'm looking at this one or custom Dynamics kit.
@@jasoningle43 Im really not sure but I bet Darren over at ciro would...give them a call and ask for him...hes the tech over there and super cool dude.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Steve I just wanted to say Ty for your Channel. I just did my 14 SGS windshield, fang ,rear crown, filler and I saved myself a lot 💰 🤑. I appreciate your Channel Atticus from Detroit
WOW! Those are sick but $540!! Holy smokes! Wish I could afford them. They’re SUPER BRIGHT! Nice job.....
Where did you see $540 the website it sent me to said $299?
256 Broncosquad yes, but for the 2 light extensions is $99, and the wiring extensions are $15 each...
Love this channel. Just bought my first HD, I take delivery in March. Your videos are fun, informative and motivating. Thanks bro!
Thank you sir..much appreciated! Glad the videos are helping...youre going to love that new sled.
Sic vids straight and to the point from Ontario Canada
Thanks JP Stay warm up there!
@@sikbaggers that's ok it just.gives me something to look forward to when it warms up .cheers
Steven … we have a Roadglide CVO 23 …. With all Ciro lights installed …. Easy conversion…
Nice! Good to know they are working on the 23's!
Hey Steve, did you ever use the third channel? Love your videos man! Greetings from Carmi!
I didnt and now have removed the fairing and speaker lights since I shot this...I did a full body swap on my bike and never re installed them.
Thanks for the quick response Steve. Can you tell me... Are they 12 inches rise ?
Kevin
AWESOME! Excellent vid.. thanks bro!
Thanks for checking it out man!
Is there a brake like feature on this set up ? Will the LED's change to red when you apply the brakes ?
Yes it has the brake function built in
Hey Steve, I watched just about all of your content. I see you purchased 22” extensions I assume for the fork lights, and 8” extensions. What were they used for?
The extensions are actually part of the kit...you will get everything you need. I added the links in case you wanted to add more lights
@@sikbaggers awesome. Thanks!
Thanks for the great video. Is there any way you could show where on the heat shield you ended up putting the button/knob for controlling the unit? You indicated the heat shield but the video ended and we didn't get a good finishing shot of the button placement. Thanks again!
I put it on the fire wall not the heat shield. On the right side right behind where your heat shield is on that wall in front of your battery above your transmission. Just stuck it there and really only use it for the on/off function.
New subscriber. Love your videos.
Excellent walk through like always keep up the good work. Will you offer a hat like the one that you are wearing on the FB page?
Hey man....I am looking into hats now...Ill announce it on the FB page if I get them...This one is from Southern Oregon Baggers. Im checking on prices though.
Sweet
Thank you...im digging them...bright!
Have a question..my lihgts were working awesome until I changed the battery on my bike..now my lights stopped working with my bluetooth on my phone..any help would be appreciated..thanks
Great videos brother! Thank you
Thank you sir..much appreciated!
I noticed you were working on a illinois licensed bike in one of your videos. I'm from illinois do you do installs still? And are you in or near illinois
Im in southern Illinois, contact me vi email slhousden@gmail.com
As you hooked up the channel 2 to run your saddlebags and front fender, the splitter that you mentioned, did it come with the kit or did you purchase it separately? What other than the kit did you purchase to run all the lights? As for this kit, as you add blade lights, machete lights, fairing turn lights, vents lights; and fork lights how can you add them all together so you keep it clean and how do you have all of them come on red when you press the brake?
Thx from Germany 🤘
Youre welcome ron! Thanks for checking it out. Be safe.
What is the complete kit listed as for purchase?
Master Touring Kit is here shrsl.com/47ovu
My LEDs is not that bright, this are great, I wonder if they have a set up for a Honda Shadow
This will work on any 12v system. I'd say the layout is about the same on the shadow as far as wires go. I dont think its bike specific.
Anyone had any issues with the LEDs being so close to the exhaust with too much heat?
no...had these on my bike for 4 years now and still on there...no issues with this kit at all.
Love the videos Steve. Thank you.
Could you tell me what handlebars you have on your bike ?
Ride safe from Sydney Australia.
Thank you! The bars are LA Choppers Twin Peaks. Very affordable and super easy to pull wires though.
@@sikbaggers
Thanks Steve for the quick response. Are they 12 inch ?
@@kmeades43 these are 10s....still behind the fairing...the 12's will be slightly over the fairing.
Hey Steve, off topic question here.....can I run a 23" wheel without messing with the neck or forks on a '20 Road King? Thanks for the videos.
unfortunately no...you need to rake for a 23....you can go up to a 21 without messing with anything else.
Did you put them on the underside of the tank? The frame seems far away
yes..on the tank
@@sikbaggers thank you. Great video on the install.
Thats bad asss bro
yeah the shock and awe kit is sick! Bright!!
Do u have a lowing kit on it besides the air ride
I did at the time of this video. It has since been removed.
Will the app turn all of these lights all red when the brakes are applied?
Its not done through the app, however its a wire from the controller you must connect to the brake wire on your bike. To utilize the brake override function connect loose red wire of the controller to the brake light circuit
of the motorcycle using supplied posi-tap connector or other suitable method.
They are bright.. my bike does look great.. just think the kit is way overpriced for what it is.. I expected end caps for where the wires end.. so I could throw dialectric grease and an end cap to keep the connections nice in case of an add on later.. and as nice is the controller cool how you can cycle thru color and function i had to mount it under the seat.. when wiring a switch to the dash would be way cleaner.. and the app sucks because you have to be connected to that and not the Bluetooth radio so you have to switch back and forth if you want to adjust it..zip ties must be from China half of them broke... I just should have looked into light brands before I dumped just over 450 for the 2 kits..
Hey Stephen...sorry to hear about the zip ties and the Bluetooth issue...I never BT my phone to my bike for audio so i didnt notice that..i just load up a thumb drive and plug it in. They are pricey, I agree!
Hey steve I know you've had several led kits on your bike now as far as brightness, useleability, and price which one would you suggest to the budget friendly builder?
well the ciros are definitely the brightest ive used...and had the most options..,.budget friendly you can get the ones I have the video on from amazon...they are decent..I used them for quite some time
I just ordered this same exact setup on Amazon.. not even close to cheap.. but hopefully it's worth it
What would you estimate the time to install this?
just a couple of hours...its pretty straight forward.
No worries of the lights melting on that rail buy the exhaust?
No ..I had the last set of cheapo amazon lights in that same spot for 3 years with no issues.
Mine have been on for four years in the same spot with no problem.
I'd like to get this exact setup is there just one link or do I need to use multiple links
there are multiple links all listed below for the whole set up..they break it up in case someone may not want the whole kit...but its totally worth it!
@@sikbaggers I'm just terrified of installing this myself I'm horrible at stuff like this do you think it's easy enough for a guy like me to do this lol
@@pitbullfan1234 Absolutly...everything is plug and play and the wires only go so far as where they get installed. Its more of Tuxedo kit rather than the amazon kits that have 4000 feet of extra wire left over...And the directions are spot on to show you where everything goes. The only two wires you really need to "hookup" are the power and ground to the battery. Everything else is a breeze.
@@sikbaggers broke down and ordered them today
Can two of the Shock and Awe kits be combined for more lighting using one controller or would that overload it?
Yes they sell splitters and you can add on as you go. The LEDs draw very little current.
@@sikbaggers Thank you sir. I spoke with Ciro's tech support group and he stated the same.
@@sikbaggers how many amps/ power does that entire 3 piece kit use?
I've already got 4 amps, 8 speakers, lots of other running lights, heated grips, heated seat, fog lights, lighted mirrors, saddlebag lights, .on my 2017 ultra limited. I'm at max now with a light kit but it needs replacing. so I'm looking at this one or custom Dynamics kit.
@@jasoningle43 Im really not sure but I bet Darren over at ciro would...give them a call and ask for him...hes the tech over there and super cool dude.
@@sikbaggers thank you. great vids and explaining.
What floorboards are those?
They are custom made one offs I had made locally.
What is your rim?
SMT Machining 21" Twisted Steel www.smtmachining.com/product/twisted-steel-front-wheel/
The other thing no bull shit UA-cam music