great video! i did this and have quite a bit of stuff from my woodstove. the crystals i got were almost clear and i used it to make soap and clean my bathroom sink drain pipe and it worked great!
Thanks for this awesome recommendations ^_^ I also want to try some science experimentations that I've watch online that I know I can do but I don't have the equipments and resources here in the city. Will try to do it maybe in my Grandparents province don't know when? But I want to they have many natural resources there ..lol 😁😂 I want to help them but for now we can't go there bcoz of lack of budget
Dzień dobry :) Mam ogromną prośbę - mógłby Pan odnieść się do tego fragmentu filmu, który dość niedawno pojawił się na YT o uzdatnianiu roztworu popiołu w wodzie (1 litr pop,/10 l wody) za pomocą 250 ml octu 10% ? Czy rzeczywiście uwolni to działanie więcej pożytecznych elementów ? Będę ogromnie wdzięczna :) link do tego fragmentu filmu ua-cam.com/video/of-WHhg-K-o/v-deo.html
Przyznam że nie znam zbyt dobrze rosyjskiego a szkoda, bo naprawdę ciekawy filmik, natomiast jeżeli chodzi o zalewanie popiołu octem jest to całkiem możliwe. Popiół drzewny to mineralna pozostałość po tym co wchłonęły rośliny i czego potrzebowały do rozwoju, znajdziemy tutaj związki potasu, wapnia, fosforu, magnezu oraz liczne mikroelementy. Rozpuszczalne są głównie związki potasu, większość pozostałych związków nie rozpuszcza się w wodzie. Jeżeli taki popiół zalejemy roztworem octu to pozostałe składniki (poza nierozpuszczalną krzemionką) powinny trafić do roztworu w postaci łatwo rozpuszczalnych octanów.
Prawdopodobnie tak, jednakże jest to bardzo trudne i niebezpieczne. Najlepiej przerobić go na chlorek potasu i poddać redukcji w wysokiej temperaturze- sodem lub metalicznym wapniem.
I'm working with it, last time I got snowy- pure, white powder of carbonate without sodium, that gives lilac flame. It looks like more than 99 percent of potassium carbonate. However the whole process is a bit complicated and needs to be improved, I'll show it in the video soon.
Hey man, great video! I did this using seaweed ashes to produce Sodium carbonate. I also have some Calcium hydroxide that I made from 'burning' seashells and reacting the Calcium oxide with water. Now I want to produce Sodium hydroxide - I read that this can be achieved by mixing the Sodium carbonate with 'milk of lime' (Calcium hydroxide water)... But I have no idea how much Calcium hydroxide will be in the water. I read that there should be an excess of Calcium hydroxide over Sodium carbonate - i'm guessing they are mixed together at a low heat...maybe 80 degrees Celsius? Someone also mentioned that the excess Calcium hydroxide will precipitate out in the presence of Sodium hydroxide... Any tips??? Thankyou :) P.S. I haven't purified my Sodium carbonate at all - am I at risk of producing Carbonic acid instead of the desired Sodium Hydroxide?
Good points, thanks. And yeah i'll be using stainless steel kitchen-wares, so nothings gonna be dissolving unexpectedly. Not sure how to limit air with my limited gear, but maybe just a lid with a hole for steam to get out but not in so much. There seems to be a few ways of going about it, i've been referring to this: free patents online dot com / 5993772 dot html And a video of Potassium carbonate to Potassium hydroxide, which I figured would be a similar process to Sodium carbonate to Sodium hydroxide. My carbonate powder is likely to have a bit of Potassium carbonate also, since I initially used dry grassy stuff to help the seaweed burn. All to get the alkali, which will be combined with my personal contribution - urea - which after cooling to 0 degrees C or less, can be used to dissolve cellulose.... cotton wool for example...It forms a cellulose hydrogel that can be dried, becoming a cellulose plastic. I'm gonna try to make a window by pressing the hydrogel into a mold for a while at around 40 degrees C or so - apparently the heat and pressure will help the polymer chains align parallel to the surfaces, making it more transparent and strong - It sounds like it also needs an acid to neutralize the alkali...maybe vinegar.... And as for plasticizer, it only needs tiny amount, so i'm wondering about using Pinene or Limonene in the form of essential oils - which I guess could saponify somewhat, on contact with the alkaline cellulose hydrogel, disperse through the mix and then 'unsaponify' and become an oil again on adding an acid..... I just wanna see if this can be done self sufficiently, for future reference. It would be an interesting and useful material... I suspect it could be used like fibreglass resin and worked into rough homemade flax paper, or something to make various composite materials. It'd be next level bushcraft haha.
Trudno powiedzieć jak to będzie wyglądało w przypadku węglanu potasu, przyznam że nie miałem okazji nigdy przeprowadzać jego rekrystalizacji, gdyż przerabiam go na chlorek potasu i dopiero wtedy go oczyszczam. Ogólnie to można rozpuścić to co wykrystalizowało ponownie w wodzie i pozostawić w otwartym pojemniku z np. kartką papieru (jako przykrycie aby nie wpadał kurz) i pozostawić na kilka tygodni. Przez ten czas powinny narosnąć kryształki. Wyrośnięte kryształki powinny zostać przemyte dwu- albo trzy-krotnie zimną wodą. Im wolniej przebiega krystalizacja (najlepiej w wysokim pojemniku) tym czystszy produkt możemy otrzymać w ten sposób.
@@julasxziom6386 znaczy ja chciałem zrobić kryształ z węglanu potasu , ale najpierw musiał bym go oczyścić i do tego wystarczy go rozpuścić w wodzie i przefiltrować ?
@@oliwier8021 Jeżeli chcesz hodować kryształy z wywaru to nie musisz koniecznie oczyszczać roztworu przez rekrystalizację, przypuszczalnie kryształy wyrosną bez problemu ale mogą być brązowe ze względu na obecność brunatnego barwnika w wywarze z popiołu.
great video! i did this and have quite a bit of stuff from my woodstove. the crystals i got were almost clear and i used it to make soap and clean my bathroom sink drain pipe and it worked great!
Dziękuję. Szukałam takich informacji:)
What is? we can use to plant forget potassium?
Super film ! Pozdrawiam
Good video
Hej, jak zrobić potaż krzemoonkowy?
Może jakieś ciekawe eksperymenty z tym?
Czy kilogram tego potażu jest bezpieczny pod względem radioaktywności?
Jak przeprowadzić proces rekrystalizacji
Thanks for this awesome recommendations ^_^
I also want to try some science experimentations that I've watch online that I know I can do
but I don't have the equipments and resources here in the city.
Will try to do it maybe in my Grandparents province don't know when?
But I want to
they have many natural resources there ..lol 😁😂
I want to help them but for now we can't go there bcoz of lack of budget
Superb
Polecam jeszcze taki węglan oczyścić przez proces rekrystalizacji.
Tak też powiedziałem :) 3:28
@@julasxziom6386 na czym polega ten proces jak go wykonac ;)
Please can I cook it if I have it in large quantities? Instead of just leaving the water to evaporate
@Doggo Blaster tnx very much
what solvent do you use for recrystalisation?
I used water- i think it's the best solvent.
Więc możesz zrobić saletra do prochu.
Dzień dobry :) Mam ogromną prośbę - mógłby Pan odnieść się do tego fragmentu filmu, który dość niedawno pojawił się na YT o uzdatnianiu roztworu popiołu w wodzie (1 litr pop,/10 l wody) za pomocą 250 ml octu 10% ? Czy rzeczywiście uwolni to działanie więcej pożytecznych elementów ? Będę ogromnie wdzięczna :) link do tego fragmentu filmu ua-cam.com/video/of-WHhg-K-o/v-deo.html
Przyznam że nie znam zbyt dobrze rosyjskiego a szkoda, bo naprawdę ciekawy filmik, natomiast jeżeli chodzi o zalewanie popiołu octem jest to całkiem możliwe. Popiół drzewny to mineralna pozostałość po tym co wchłonęły rośliny i czego potrzebowały do rozwoju, znajdziemy tutaj związki potasu, wapnia, fosforu, magnezu oraz liczne mikroelementy. Rozpuszczalne są głównie związki potasu, większość pozostałych związków nie rozpuszcza się w wodzie. Jeżeli taki popiół zalejemy roztworem octu to pozostałe składniki (poza nierozpuszczalną krzemionką) powinny trafić do roztworu w postaci łatwo rozpuszczalnych octanów.
@@julasxziom6386 Bardzo dziękuję :) Czyli śmiało można stosować i propagować ? :)
@@modliszqa Oczywiście w umiarze ;)
Możliwe jest otrzymanie metalicznego potasu z potażu?
Prawdopodobnie tak, jednakże jest to bardzo trudne i niebezpieczne. Najlepiej przerobić go na chlorek potasu i poddać redukcji w wysokiej temperaturze- sodem lub metalicznym wapniem.
cool video any idea on how to turn it into white crystals and remove even more impurities
I'm working with it, last time I got snowy- pure, white powder of carbonate without sodium, that gives lilac flame. It looks like more than 99 percent of potassium carbonate. However the whole process is a bit complicated and needs to be improved, I'll show it in the video soon.
Roast the powder.
Interesting idea
I thought the powder was supposed to be white. I'm new at this.
To może teraz dokładniej wytłumczyć jak oczyścić Potas.
Hey man, great video! I did this using seaweed ashes to produce Sodium carbonate. I also have some Calcium hydroxide that I made from 'burning' seashells and reacting the Calcium oxide with water.
Now I want to produce Sodium hydroxide - I read that this can be achieved by mixing the Sodium carbonate with 'milk of lime' (Calcium hydroxide water)... But I have no idea how much Calcium hydroxide will be in the water. I read that there should be an excess of Calcium hydroxide over Sodium carbonate - i'm guessing they are mixed together at a low heat...maybe 80 degrees Celsius? Someone also mentioned that the excess Calcium hydroxide will precipitate out in the presence of Sodium hydroxide... Any tips??? Thankyou :) P.S. I haven't purified my Sodium carbonate at all - am I at risk of producing Carbonic acid instead of the desired Sodium Hydroxide?
Good points, thanks. And yeah i'll be using stainless steel kitchen-wares, so nothings gonna be dissolving unexpectedly. Not sure how to limit air with my limited gear, but maybe just a lid with a hole for steam to get out but not in so much. There seems to be a few ways of going about it, i've been referring to this: free patents online dot com / 5993772 dot html And a video of Potassium carbonate to Potassium hydroxide, which I figured would be a similar process to Sodium carbonate to Sodium hydroxide. My carbonate powder is likely to have a bit of Potassium carbonate also, since I initially used dry grassy stuff to help the seaweed burn. All to get the alkali, which will be combined with my personal contribution - urea - which after cooling to 0 degrees C or less, can be used to dissolve cellulose.... cotton wool for example...It forms a cellulose hydrogel that can be dried, becoming a cellulose plastic. I'm gonna try to make a window by pressing the hydrogel into a mold for a while at around 40 degrees C or so - apparently the heat and pressure will help the polymer chains align parallel to the surfaces, making it more transparent and strong - It sounds like it also needs an acid to neutralize the alkali...maybe vinegar.... And as for plasticizer, it only needs tiny amount, so i'm wondering about using Pinene or Limonene in the form of essential oils - which I guess could saponify somewhat, on contact with the alkaline cellulose hydrogel, disperse through the mix and then 'unsaponify' and become an oil again on adding an acid..... I just wanna see if this can be done self sufficiently, for future reference. It would be an interesting and useful material... I suspect it could be used like fibreglass resin and worked into rough homemade flax paper, or something to make various composite materials. It'd be next level bushcraft haha.
Umm... I dont understand this science stuff ..but could you just make a video about your examples please? Hehehe
Thanks very much for this comment, you've helped me to synthesize sodium bicarbonate!
jak zrobić rekrystalizacje ????
Trudno powiedzieć jak to będzie wyglądało w przypadku węglanu potasu, przyznam że nie miałem okazji nigdy przeprowadzać jego rekrystalizacji, gdyż przerabiam go na chlorek potasu i dopiero wtedy go oczyszczam. Ogólnie to można rozpuścić to co wykrystalizowało ponownie w wodzie i pozostawić w otwartym pojemniku z np. kartką papieru (jako przykrycie aby nie wpadał kurz) i pozostawić na kilka tygodni. Przez ten czas powinny narosnąć kryształki. Wyrośnięte kryształki powinny zostać przemyte dwu- albo trzy-krotnie zimną wodą. Im wolniej przebiega krystalizacja (najlepiej w wysokim pojemniku) tym czystszy produkt możemy otrzymać w ten sposób.
@@julasxziom6386 znaczy ja chciałem zrobić kryształ z węglanu potasu , ale najpierw musiał bym go oczyścić i do tego wystarczy go rozpuścić w wodzie i przefiltrować ?
@@oliwier8021 Jeżeli chcesz hodować kryształy z wywaru to nie musisz koniecznie oczyszczać roztworu przez rekrystalizację, przypuszczalnie kryształy wyrosną bez problemu ale mogą być brązowe ze względu na obecność brunatnego barwnika w wywarze z popiołu.
byle więcej takich filmów
Do czego jest przydatny.
wujek google nie gryzie... polecam użyć hasła: potaż
Potassium, sodium, calcium hydroxide ets
po co te wszystkie pierdamoty jak popiół drzewny można wprost użyć do kompostownika i potem zasilić rośliny???
Nie każdy używa tego jako nawóz
Bo każdy ma ogród i musi się nim bez przerwy zajmnować.
Greetings.