Це відео не доступне.
Перепрошуємо.
WPL LCG Build Part 2 - Suspension Links and Shocks
Вставка
- Опубліковано 18 лют 2023
- Added the suspension links and shocks to the WPL LCG build in this video. Link to everything in this build and the past build are below:
5mm to 12mm Brass Wheel Hub Hex Adapter: amzn.to/3K5dB6f
MN86 Wheels and Tires: amzn.to/3XvcNvf
Brass Weights 12mm Hex Wheel Hub Adapters: amzn.to/3YTXbT3
Injora 1.9 Beadlock Wheels: amzn.to/3k0g7ka
AIMROCK 2-Pack 1/10 RC Crawler Aluminum Shocks Internal Spring Dampers 70mm: amzn.to/3S5IVUQ
75mm-85mm Suspension Links: amzn.to/3Z30xmg
2Pcs Vgoohobby Metal Centre Transmission Shaft Drive Shaft (80mm-100mm): amzn.to/3jVdBff
LaTrax ESC: amzn.to/3if19FQ
1.55" Injora Stamped Beadlocks: amzn.to/3igEokB
My Old Wheels and Tires: amzn.to/3H1MhkM
Servo Plug Kit: amzn.to/3BLbMFZ
Bob Smith Industries Insta Set: amzn.to/3sW1crR
Bob Smith Industries Super Glue: amzn.to/35aEwf8
30A ESC: amzn.to/3IQQB7S
Ovonic 2S 1000mah Lipo Batteries: amzn.to/3rbJ25w
Servo Plug kit: amzn.to/3s34B7D
Flysky GT2B Controller and Receiver: amzn.to/3ISCfnA
370 Motor Metal Transmission:
Amazon: amzn.to/3q483Pz
Banggood: www.banggood.com/custlink/3GG...
9g Servo:
Amazon: amzn.to/3f2nC4b
Banggood: www.banggood.com/custlink/v3K...
Servo Mount: amzn.to/33jdzVL
Metal shocks with shock mounts: amzn.to/3p2y55d
Metal suspension links: amzn.to/3p1tZdC
2.5mm hardware kit: amzn.to/3F5AnpW
I am an affiliate of Amazon, Gearbest and Banggood. This means if you purchase anything using any of the links I provide in any of my videos, I get a small commission and it helps me out with funding this channel to bring more content. Thank you to everyone who had already purchased items through my links. You are all awesome!!
Support the channel by purchasing Shirts and Merch, link to my online store through Teespring is here: teespring.com/stores/ready-to...
Coming along nicely! Really enjoying this build so far. Keep up the good work
Thanks! Glad you are enjoying the series so far.
Looks awesome…very interesting build 👍👍
Yes it does look cool. Not sure what I’m doing so basically winging it.
あなたのマシンはカッコイイ。私もWPL ｃ14を持っているのであなたの動画を参考にさせてもらっている。
Awesome mod work on your wpl my friend! Really enjoy watching. Liked & subbed! Keep up the good work😁👍🏼
Thank you! I have some more with this build on the way.
@@ReadytoRunRC Looking forward to your update for this wpl my friend😁👍🏼
Way cool stuff, RTR.
Glad you like!
Looking 👍
Very nice 👍👍
Thanks!
Superb bro...auto sub
Sweet. Thanks for the sub. Appreciated l!
nice...SEE
Thanks
Yeah yeah I need to build my wpl too I hear yeah 😊
Oh yeah. You should.
I guess I'm missing something couldn't see the brackets in your build list. I have little L type brackets that have the 2.5mm hole for shocks on one end and a flat side that I'm thinking could go into the leaf spring holes? I give it a try. Thanks
I’m following this to the end brother. Giving me ideas for mine
Thanks for coming along on this ride so far.
Hi what was the length of the links after you adjusted them from 75 and 85
Is there away to use 110scale tc wheels on those diffs
I love these cars, got 2 for my boys but this build series made me get one. How to you get the brass adapters on? You got metal but mine are plastic axles and they definitely didn't want to go on. maybe mine are super cheap but it's literally hex peg in round hole. Nice build ill be watching
Thanks. Glad you are checking out the build. The adapters have 2 grub screws that you tighten on the flat part of the hex axles. So even though the hole is round you still tighten to a flat side of the axle preventing the axle from spinning inside the adapter. Don’t forget loctite or the grub screw will keep loosening up.
U can try using mn78 driveshaft..it was longer than mn99/wpl..
Yeah I just looked those up and they would work too. I already ordered 1/14 scale Tamiya drive shafts and will be putting them on this weekend since they just got delivered.
Hey, great video, I bought some metal upgrades around 3 years ago, and I abandoned the project and I want to start it again. I forget how complicated some little details are. Thanks for you videos.
I'm interested on the set of tools you use at 2:22, I have the Philips screw driver but I need to get one of those hex socket.
Glad you used my videos for some help. It’s just a basic set of dynamite tools. Here’s a link for it. amzn.to/48DRgFZ
@@ReadytoRunRC Thank you very much, already added to my cart.
@@maxdeniel awesome! Hope your build goes good.
Hey mate, nice build. Just curious did you use loctite when spinning the lower links out? Mine seem to come loose easily :)
@@OgPumpkinSlayer thanks! Yes I put some on. I had the same problem with them spinning themselves.
@@ReadytoRunRC legend! I'll be adding some this arvo then :)
Can you please tell me what hardware you used to attach the lower shock mounts to the axels?
Are u talking about the link?
I used 2.5mm screws. The kit I have is linked in the video description
how about a spacer to move that shock out a little to clear the shock body?
I’m flipping the shock upside down to be able to mount it as close as possible to the mount and also putting most of the weight of the shock down by the axles.
@@ReadytoRunRC I see you got away from coilovers too. Was that to keep it close to the frame or better performance from the other shocks?
@@anthonyesquivel5863 it’s actually for looks. I liked the look of the internal spring shock but the ones I put on did end up being better than my other shocks.
What size shocks did u use
70mm
Where do I get those links from?
From the link in the video description
Wow.. What is the length of the shock
70mm
Pakai linkrod apa itu
What’s the length of wheelbase with this setup?
@@Stodgyaban_ I have no idea. I changed it since I made this video.
@@ReadytoRunRC its okay. Thank you for the reply. Have a nice day sir 🙂
@@Stodgyaban_ sorry I couldn’t help. Thanks for watching the video. Have a nice day too.
How much did all of that cost?
Mine cost about 200 to build
Where did you get the links bud?
Link for the links is in the video description
That's a link for the red ones
@@vhrte49 ok. For some reason that was one I missed. I updated it now.
@@ReadytoRunRC Cheers mate🙂
@@ReadytoRunRCive checked and its not updated
Man you think I could get those old links 🤣🤣🤣🤣
If you’re in the US email me readytorunrc.rtr@gmail.com and let me know where to ship them. I got you.
@@ReadytoRunRC okay I will thank you man
@@RAKS_HoneyBadger yep no problem. Just got your email.
@@ReadytoRunRC 👍 sounds good I'm really excited so far iv bought axles wheels and recently spent alot of money trying to buy certain paint color for it so this will definitely help the build tremendously