Thank you for the info. I was about to order parts from Riva. I have 3 skis. 2016 spark 3up, yamaha suv and 2008 RXP 215 supercharger . I immediately cancelled my order. Thank you thank you for saving me money.
Great, smart video. To see what these companies get for a crappy piece of silicone tubing, a block off, and a trim piece to hold the pipe to the FRIGGING HOLE you just unnecessarily drilled in your hull is ridiculous! Good for you.
Was looking at Riva wondering how they could cost so much but was going to buy anyways, came to UA-cam to look for install videos. Now I'm waiting for parts from eBay to do your way $42
The above ebay site says it's this: 12 - 2.75" 70MM 90 Degree Aluminium Turbo Intercooler Pipe Tube Tubing L=300MM US. Is this the correct pipe that can be used on RXP X 12. Just making sure as this is great information and tip.
Link above is DOA, Try searching for: "Pre-Fix 2.75" inch 90 Degree L Bend Universal Aluminum Intercooler Intake" which may be a better fit anyway? Randy AKA randog311
What tool did you use to remove the D-Seabel? My box is attached with a black circular top with a small hole in the center. I don’t believe I have any tools to remove this kind of “screw”
Did you cut off the end piece of the muffler box and reuse that? I did not have a hose at the lower end that still created a seal into the hull. I'd cut it but want to be sure. Otherwise I dont see how a good seal could be made that if trust. Any help would be greatly appreciated.
hello, I have Kawasaki 2019, stx 15f, and I want to make it sound louder, the only thing it has its s water box and then it goesd straight to the back. I was wondering can I buy a used waterbox and make it free flow "remove everything from the inside", will this hurt the ski? pls let me know.
I have a 2010 sea doo rxp x. Just wondering if I would need a tube 2.75 or 2.5? Seems like alot of people are using 2.5? Thanks for this video I had plan to buy the RIVA kit but after this video NOT a chance! Lol
@@FLORIDALIFECLIPS I did end up just cutting the pipe I had shorter. I used 4 clamps to hold it on. A lot louder now that’s for sure. Can’t wait to go ride after this cold leaves. Cheers !
Sorry it's been so long ago I'm not sure best way to do it is go to Harbor freight a get a measuring tool they run couple bucks measure it and millimeters inside diameter
@@FLORIDALIFECLIPS thanks yah I took the muffler off and measured it was 2.5 inches diameter and 12 inches long. Already ordered one. Thanks for the video can't wait to hear the free flow now.
I have a 2007 Sea-Doo GTI SE 155 , I’ve had since it was new and I’ve found I’m very limited on any upgrades... will this exact pipe work on my sea-doo?
I totally understand that video was made years back all we have to do is measure your inner diameter of your rubber tubes coming off your exhaust and you go on eBay and look up intercooler piping it's easy as that couple measurements and you have whole setup I apologize I don't have time anymore to do the links to busy these days
+addison smith It does affect the performance it sounds and performs a 100% better. The gas have no clue because my styles of riding change every time I go out I go to a different Location every time
Unfortunately I haven't done is video in a very long time I don't remember the sizing it's very easy to do go to Harbor freight get a measuring tool in millimeters and measure your pipe outside diameter
Not true. It changes the mapping of ECU and you loose top end unless re flash is done. I lost boost and I went from 68mph to 59. On supercharged skis mods have to be done.
How you doing? Hope everything ok,, just to give you an update to help your viewers on whoever has a Sea doo GTR 230 2019 and will like to find out if this would work on it,, it definitely will,, unfortunately I had a 10 off Coupon from Riva Racing and bought the Free flow from them for about $135 shipping included but whoever will like to save that money and just follow this steps,, it will work on the GTR 230 2019. TAKE CARE AND HOPE THIS HELP YOUR VIDEO AND YOUR VIEWERS.👍🏾
Thanks. Done. All ordered. How do i get the black box out? I know you said undo the hose clamps and remove the hoses, but there is also a bolt that goes in to the hull. It doesn't have a head for a screw driver or anything. How did you undo that?
Branden Dwornick On ebay... they’re 70 mm 90° polished aluminum elbows for intercooler plumbing. You just have to watch where it’s coming from, the China vendors take up to a month to deliver.
Unfortunately I don't have any more skis to modify remove it as quickly as possible doesn't matter if it breaks or not because you will not be using it again.
My friend did this and it don’t sound as nice as the riva they are high in price so I don’t shop from them if I don’t have to but this sound like shit when put next to a Silicone rubber material free flow Exhaust n it don’t have to be from riva remm is an upgrade so u leaving them 2 stock holes is a no no they lick air after a while bc they cant handle all that with out the secondary water box
so i have a 2012 model rxt 260 rs as and am thinking to make the same mod. will i do the same work as you did in the video? take out the box and put a straight pipe?
Thank you for the info. I was about to order parts from Riva. I have 3 skis. 2016 spark 3up, yamaha suv and 2008 RXP 215 supercharger .
I immediately cancelled my order. Thank you thank you for saving me money.
Right on
Did this on my 2012 rxp x. Piece of cake and sounds awesome. Thanks for the video. Couldn’t have done it without u.
Hey do you remember the pipe length you used ?
Where did you buy the pipe?
You just earned a subscriber!!! Again, Thank you for the tip. I will share your video to all the Central Texas Jetski Group.
Bro..Well Said...Thanks for helping us save money and learn from you..God bless you......
Great, smart video. To see what these companies get for a crappy piece of silicone tubing, a block off, and a trim piece to hold the pipe to the FRIGGING HOLE you just unnecessarily drilled in your hull is ridiculous! Good for you.
Thanks for your video I was about to order from their website.
Was looking at Riva wondering how they could cost so much but was going to buy anyways, came to UA-cam to look for install videos. Now I'm waiting for parts from eBay to do your way $42
RIVA is biggest rip-off
WELL SAID!
what about back pressure????
The above ebay site says it's this: 12 - 2.75" 70MM 90 Degree Aluminium Turbo Intercooler Pipe Tube Tubing L=300MM US. Is this the correct pipe that can be used on RXP X 12. Just making sure as this is great information and tip.
Please take the measurements yourself and converted into millimeters just to be sure you're ordering the right pipe.
Link above is DOA, Try searching for: "Pre-Fix 2.75" inch 90 Degree L Bend Universal Aluminum Intercooler Intake" which may be a better fit anyway? Randy AKA randog311
I believe you might have to convert it into millimeters
thanks a lot buddy this video is a really big help and help me save money.
For a 2015 Seadoo 155 where can I get it
Where can I get a pipe or what size is it for a 2005 rxp 215
Yeah ohhhh shit u love your story yeah what a rip.
I know right FUCK RIVA RACING
Nice video!!! Would you be able to, instead, bring exhaust pipe straight back and would it make difference vs leaving the way you left it?
What tool did you use to remove the D-Seabel? My box is attached with a black circular top with a small hole in the center. I don’t believe I have any tools to remove this kind of “screw”
+Brandon Nguyen I just drilled it out and purchased a ribbit set at Harbor freight and putting new one on
Did you cut off the end piece of the muffler box and reuse that? I did not have a hose at the lower end that still created a seal into the hull. I'd cut it but want to be sure. Otherwise I dont see how a good seal could be made that if trust. Any help would be greatly appreciated.
No cutting you should have a silicone pipe coming of the hull
hello, I have Kawasaki 2019, stx 15f, and I want to make it sound louder, the only thing it has its s water box and then it goesd straight to the back. I was wondering can I buy a used waterbox and make it free flow "remove everything from the inside", will this hurt the ski? pls let me know.
Hahahahaha I love this gye his exactly rite riva want to charge 120bux for a 300mm length pipe when you can get the same for 20bux screw that
Anyone know if this changes things with an inverted ski? Does the water box reduce the chances of exhaust water intrusion?
I have a 2010 sea doo rxp x. Just wondering if I would need a tube 2.75 or 2.5? Seems like alot of people are using 2.5? Thanks for this video I had plan to buy the RIVA kit but after this video NOT a chance! Lol
Bixby1979 2.75 is a better fit link is down below.
What’s the length of the pipe ? I bought one too long. Cheers on the video saved me a lot of $$$.
I have no clue no longer own the jet ski What I would recommend is just buy a longer one you can always cut off a piece if you have to
@@FLORIDALIFECLIPS I did end up just cutting the pipe I had shorter. I used 4 clamps to hold it on. A lot louder now that’s for sure. Can’t wait to go ride after this cold leaves. Cheers !
i would like to change the exhaust for seadoo speester with the 717/720 motor. Could you steer me in the right direction
Unfortunately I don't have much experience with the 2 strokes on the exhaust systems.
Good info!!!
So is this 70mm or 90mm. Good job bro looks amazing and can't wait to do it now
Sorry it's been so long ago I'm not sure best way to do it is go to Harbor freight a get a measuring tool they run couple bucks measure it and millimeters inside diameter
@@FLORIDALIFECLIPS thanks yah I took the muffler off and measured it was 2.5 inches diameter and 12 inches long. Already ordered one. Thanks for the video can't wait to hear the free flow now.
albert buca can u send link ? What u ordered? My box melted and I need to replace mine.
@@marcomwd Don't understand your question you're supposed to remove the plastic Box and only use your aluminum water Box
I'd use a 3 inch as the hoses are larger than 2.5. I put a 2.5 for now but waiting on my 3 inch pipe
Will this work for the 2016 gtx 300?
Update, any problems still running
Yes
Hey Bud. I ordered my pipe. Thanks so much. Have you got any wisdom for intake systems?
Sure but again I don't have the different kind of skis to make videos on
@@FLORIDALIFECLIPS yes I understand. I have a 2016 gtr 215. What would you use as an intake?
Yes. Ideally I think that AUD$385 is extremely over priced for an intake system. Filter here is roughly $90. I can't see the rest costing $300
Hi!
Anybody knows what is the correct diameter/size for rxp-x 260 rs as model ?
I don't have jetski to measure that at the moment:)
Will this work on 2017 spark.ace 90 ho
No
@@FLORIDALIFECLIPS thanks
This is a great video where can I buy the pipe
EBay, it's a Turbo intercooler pipe.
@@FLORIDALIFECLIPS thanks you saved me money lol
That box is a pain to take out off my 07 rxp 215 im so stuck can you throw me a idea please?
I have a 2013 Seadoo Wake 155.....will this pipe fit that model???
Yes
I have a 2007 Sea-Doo GTI SE 155 , I’ve had since it was new and I’ve found I’m very limited on any upgrades... will this exact pipe work on my sea-doo?
I'm not sure never done a 2007 very easy to do just take a few measurements down convert them into millimeters and order the pipe.
Update, ordered this same pipe on EBay and it fit perfectly on my 07 Sea-Doo GTI 155 SE . Thanks for the helpful vid...
I did this and my ears cant take it anymore..
Hello, link don't work anymore
I totally understand that video was made years back all we have to do is measure your inner diameter of your rubber tubes coming off your exhaust and you go on eBay and look up intercooler piping it's easy as that couple measurements and you have whole setup
I apologize I don't have time anymore to do the links to busy these days
Does this free flow effect fuel mileage and or engine performance?
+addison smith It does affect the performance it sounds and performs a 100% better. The gas have no clue because my styles of riding change every time I go out I go to a different Location every time
Did you ever do a video of how it sounds?
Can you make a video of how it sounds
If it warm up a bit I will.
Is this the same for a 2012 wake 155?
I am not sure the video was posted a very long time ago
what is the difference when removing it?
Sound and bit of Better throttle response
Can you get a fine with this modification ?
Hey I have the same ski and want to do the upgrade for some reason can’t find the pipe and you’re link doesn’t come up can you link a new one🙏🏻
Unfortunately I haven't done is video in a very long time I don't remember the sizing it's very easy to do go to Harbor freight get a measuring tool in millimeters and measure your pipe outside diameter
What do you do for tuning? Is a tune needed?
Nothing needs to be done
Not true. It changes the mapping of ECU and you loose top end unless re flash is done. I lost boost and I went from 68mph to 59. On supercharged skis mods have to be done.
Is there a new Link for this pipe because the actually Link doesn`t work?
Sorry no new links
2016 RXT X 300 -- will this work
Don't see why not
Fuck 10%. Thanks for the video 💪
This fit on a rxt 300 2020. Any idea???
Should but not 100% sure
Will this work on a supercharged seedoo?
It should
Will this work on 2012 seadoo gti 130 se?
Yes
Would this work for a 2006 sea doo rxt 215
Yes
Will it work on a ‘17 spark?
Not this particular set up but yes you can do a spark you just have to do some measurements and look up the turbo piping yourself on eBay
Would this fit on a Sea Doo Gtr 230 2019?
Not a 100% sure but if the set up is the same as you see in the video it should
How you doing? Hope everything ok,, just to give you an update to help your viewers on whoever has a Sea doo GTR 230 2019 and will like to find out if this would work on it,, it definitely will,, unfortunately I had a 10 off Coupon from Riva Racing and bought the Free flow from them for about $135 shipping included but whoever will like to save that money and just follow this steps,, it will work on the GTR 230 2019. TAKE CARE AND HOPE THIS HELP YOUR VIDEO AND YOUR VIEWERS.👍🏾
Can this be done for a 2017 gtr x 230
Yes
Wil this work on a 2008 rxp 255
90% sure it will
Will this fit a 2016 rxp x 300 ?
No clue never tryed but should be very easy to do
Can this done to a 2019 gtr230?
Sure you can just gonna have to do some measurements and order the proper piping
Will this work on a 2019 gti 155 se
If the SETUP is the same on the inside it will.
Captaincashmoneyliquor pretty sure it will fit
Well done man. Waht a rip off. Its not always u get what u pay for. Someyimes its just the brand that isbthe main cost
hey mate, do you have a link where i can get that pipe?
After you do your own measuring converted into millimeters and so on eBay
Thanks. Done. All ordered. How do i get the black box out? I know you said undo the hose clamps and remove the hoses, but there is also a bolt that goes in to the hull. It doesn't have a head for a screw driver or anything. How did you undo that?
Where can I find it?
Ebay
Just bought 2 for my skis @ &17.60 each, free shipping, !?¿PRICE DROP¿?!
From where
Branden Dwornick On ebay... they’re 70 mm 90° polished aluminum elbows for intercooler plumbing. You just have to watch where it’s coming from, the China vendors take up to a month to deliver.
It would be nice if you could show how to take out that ugly box out of the way...lol
Unfortunately I don't have any more skis to modify remove it as quickly as possible doesn't matter if it breaks or not because you will not be using it again.
My friend did this and it don’t sound as nice as the riva they are high in price so I don’t shop from them if I don’t have to but this sound like shit when put next to a Silicone rubber material free flow Exhaust n it don’t have to be from riva remm is an upgrade so u leaving them 2 stock holes is a no no they lick air after a while bc they cant handle all that with out the secondary water box
Anyone have a link where can purchase 90°
Go on eBay its Turbo piping
Whats the exact size? Thanks
How do I take off the black box?
From the hull?
Ernesto Padron can we still get pipe I can’t find it anymore?
so i have a 2012 model rxt 260 rs as and am thinking to make the same mod. will i do the same work as you did in the video? take out the box and put a straight pipe?
Yes
FLORIDA LIFE CLIPS Would it be safe to do a thru hull exhaust the same way without having to buy the full pipe from riva?
Would this work for a 2017 Seadoo Wake Pro 230. Thanks for the video
90% sure it was it would
I have a 2013 sea doo gti can anybody purchased something for that and can send me the link please
I have not done this mod in year Do some measurements converted into millimeters go on eBay under Turbo inter cooler pipes
cut it open whats in side the box.
OUCH
Yes thats bull crap lol 10% off what a cheap ass holly .!!! Well keep making these videos well done thanks :)
10% off 🤣🤔😁😏🤮🤔