Love the detail. Also wish I could afford this machine, i really like the fact it can do the things shown in the video, and has a router it could use at the front as well for rotary work. Gotta have one some day!
do you make these wood carvings? was wondering how much would cost to get one done one rectangular about 4 feet wide by 2 feet? what ever size you think will look better. or even 3 Feet X 20? and the small one let's say 16 wide by 12 high? again, you see what size will look better thanks
all dust left around the machine. We are machine manufacturer not user. We don't use dust collector during work. We clean up at the end of each day, when work is off.
very nice job Liu xin you are doing great, keep uploading these type of videos so that the world could learn from you, can you please upload video showing how to make this design for Vbit carving, is it a relief work or simple design with vectors only.
hi, victor please check my video ua-cam.com/video/AfRk8wLlGK8/v-deo.html it shows how to make same tool path as this. P.S. don't trust other guys who leave contact info beneath my video. They are not my partner but competitor. However they don't have good videos or machines to show you so they comment in my video and want to send you ads to sell their machines.
well, it's not recommended to have the rotary in front of the machine like in the video. It's better to have it portable along Y axis (takes place of X). So in this case, this machine price at 15400 USD. Email me and I can send you more details. instantlx@gmail.com
Hello, Nice video, I've got a HongDa BoKe CNC Router, and lately I a problem when I work on MDF, the wick heats and get broken , I don't know how to solve it cause I have it since 2012 and I never had this problem before ... Pleeeease can you help me?
How did you do the model for it? I want to do something like this, and i'm wondering how to make it. Maybe a countour between 2 planes? Please give me some advices. Thanks :)
feed rate can be 10m/min or hgiher, the real working speed is slower than this, usually 6m or so. Plunge rate is 1m/min usually. as long as the machine is strong enough and the cutting bit is sharp enough, you can set the feed rate bigger. The machine will achieve your setting as much as it can.
Hello , this is a great video... but I want to know if the software that you are working here is free? ...And what is the chip controller that use this machine? Thanks
software is not free, you need to buy it. A genuine software will help you a lot. usually we use DSP system for this kind of machine. contact me for more detail: instantlx@gmail.com
LIU XIN Dear Friend , I want to build a machine cnc for cut wood, but I don´t know where to find the materials I read about the use of the DSP but I don´t where buy this chip controller. Can you Help me with the link where I can to buy this chip controller? this can to be in amazon or ebay alexpress, etc, also can you help me with the link where I can to buy the software CAD for this chip controller? so I wish to build muy machine but I have some worldwide about the motors what motor I should buy for a machine the dimentions 1m x 1.5, and what is your conection with the chip controller DSP..... Thank you so match for your atention, PD: Excuse me for my English but I am Ecuadorian and I can speak English only a few
Hi Peter, I just made this for sample to show the machine working ability to customers. You may search "v bit" in my channel to see tutorials of making this kind of tool path.
Hi i am looking for a económic software i am starting on it i got a 6040 cnc can you recommend a good one the machine came whit mach3 but I need one to designing thank you
Haixun is for Cabinet designing and nesting. It's for 1325 or bigger machines, especially for furniture production line (auto loading and unloading with cnc router). Know your software better before selling it, Miss.
this one doesn't but we have other machines does. check this one ua-cam.com/video/30hTjYfNle0/v-deo.html or email for more details. instantlx@gmail.com
We are cnc router machine factory from China,if need machines,plz contact me by email chernny.chen@gmail.com or whatsup:008613573772459 skype:chernny.chen
While I was fascinated by the technology I was somewhat saddened. If we are not careful, technology will take the human touch out of creating such beautiful things and reduce the art to soulless machine work.
Stex shipping to Italy 1325 machine is about 150 USD. yes we have 1325 with lower power spindle such as 3.5kw, price starts from 8,600 USD FOB Qingdao. Please email me so I can send you specs in detail. instantlx@gmail.com
thank you..:) I am e mail:fenerliyunus_100@hotmail.com I threw you an e-mail I request from you to me in detail the characteristics of the price which I prefer especially servo motor .. and I'm glad you specify here how we can supply.
We are cnc router machine factory from China,if need machines,plz contact me by email chernny.chen@gmail.com or whatsup:008613573772459 skype:chernny.chen
1325 model 1300x2500x200 (x,y,z) work size 6kw air cooling spindle (China brand) Delta servo motors (Taiwan) Rotary axis size: 150mm x 1500mm (diameter x length) 5.5kw vacuum pump Dust collector Price 16500 USD FOB Qingdao. There are other options for better performance or lower price. It depends on your demand.
+Nessa Turner stronger. it means 6kw holds bigger cutting tools and can run on faster speed. save more time in work. 1.5kw spindle only used on ball screw machines such as 0404, 6090, 1212. For most woodwork we recommend 4.5kw or higher.
Dat nguyen van Thank you. It was my first time to make tool path this way. I should have optimized the tool path to make the whole work more smooth and faster.
Thanks. Do you mean the V bit tools? We bought from tool factory. This type of v bit is one of our standard tools for customers.
Love the detail. Also wish I could afford this machine, i really like the fact it can do the things shown in the video, and has a router it could use at the front as well for rotary work. Gotta have one some day!
Yes, you're right. That was the first time that I made v bit carving tool path.
do you make these wood carvings? was wondering how much would cost to get one done
one rectangular about 4 feet wide by 2 feet? what ever size you think will look better. or even 3 Feet X 20?
and the small one let's say 16 wide by 12 high? again, you see what size will look better
thanks
Hi, I sell machines. I don't provide woodwork service.
LIU XIN
LIU XIN
Hi, what's the kind of drill you're using to cut this?
Where is going all the dust? what type of dust collector are you using ?
all dust left around the machine. We are machine manufacturer not user. We don't use dust collector during work. We clean up at the end of each day, when work is off.
how did you make it ?, i mean it goes with the machine that received command from computers, doesn't it ? let me know, please
ua-cam.com/video/AfRk8wLlGK8/v-deo.html
Nice vcarving work ! Looks great.
Very nice again.... maybe a strange question, but where do these V bits come from?
very nice job Liu xin you are doing great, keep uploading these type of videos so that the world could learn from you, can you please upload video showing how to make this design for Vbit carving, is it a relief work or simple design with vectors only.
+Saeed Khan Thanks for encouraging. actually I made a video for this ua-cam.com/video/AfRk8wLlGK8/v-deo.html hope you'll like it.
Hello sir will u plz tell me which is best water cooled spindle or HSD air cooled spindle?
Air cooled is best
Hi ! Congratulations for your job, very good !
How, do you make toolpath in the Artcam ? Can you explain me ?
skype:amyjun07.cnc machine post process
Thanks for your help, but i not understand. Can you explain me again ?
hi, victor please check my video ua-cam.com/video/AfRk8wLlGK8/v-deo.html
it shows how to make same tool path as this.
P.S. don't trust other guys who leave contact info beneath my video. They are not my partner but competitor. However they don't have good videos or machines to show you so they comment in my video and want to send you ads to sell their machines.
How many kw is the spindle on the video? And what's the brand
it was 6kw air cooling, 18000 rpm maximum. just China brand
This is so relaxing to watch.
Evan Wing this is for business and industry. not for curing OCD. search "CNC relief" instead.
? Just because it's not for "curing OCD", doesn't mean I can't watch it for entertainment.
Evan Wing well, have fun then. ,😎
Hi Liu, i would like to know it too like Anderson Lima. How much is it, and where can i get it?
well, it's not recommended to have the rotary in front of the machine like in the video. It's better to have it portable along Y axis (takes place of X). So in this case, this machine price at 15400 USD. Email me and I can send you more details. instantlx@gmail.com
Can delcam powermill program run in dsp controller cnc router......which post processor used.........what are the changes in starting line .....plz
Hello, Nice video, I've got a HongDa BoKe CNC Router, and lately I a problem when I work on MDF, the wick heats and get broken , I don't know how to solve it cause I have it since 2012 and I never had this problem before ... Pleeeease can you help me?
email and tell me detail: instantlx@gmail.com
Why does your machine speed up on curves?
the video was taken during debugging. not the final condition
what 3d package did you use?
Masha Allah, greetings to your classy person 🌹
How did you do the model for it? I want to do something like this, and i'm wondering how to make it. Maybe a countour between 2 planes? Please give me some advices. Thanks :)
How much did you set plunge rate and feed rate
feed rate can be 10m/min or hgiher, the real working speed is slower than this, usually 6m or so. Plunge rate is 1m/min usually. as long as the machine is strong enough and the cutting bit is sharp enough, you can set the feed rate bigger. The machine will achieve your setting as much as it can.
can you tell me how to make the video to be clear on the UA-cam?
Lovely design. Do you have a document of it so I can put it into a fireplace? Please???
yes
www.instantlx.com/2013/12/vector-share2013-12-16-vector-for-v-bit.html
Hello , this is a great video...
but I want to know if the software that you are working here is free?
...And what is the chip controller that use this machine?
Thanks
software is not free, you need to buy it. A genuine software will help you a lot.
usually we use DSP system for this kind of machine.
contact me for more detail: instantlx@gmail.com
LIU XIN Dear Friend ,
I want to build a machine cnc for cut wood, but I don´t know where to find the materials
I read about the use of the DSP but I don´t where buy this chip controller.
Can you Help me with the link where I can to buy this chip controller? this can to be in amazon or ebay alexpress, etc,
also can you help me with the link where I can to buy the software CAD for this chip controller?
so I wish to build muy machine but I have some worldwide about the motors what motor I should buy for a machine the dimentions 1m x 1.5, and what is your conection with the chip controller DSP.....
Thank you so match for your atention,
PD: Excuse me for my English but I am Ecuadorian and I can speak English only a few
LIU XIN PLEASE SEND ME DETAILS THIS MACHINE MY - MAIL - WTBIC@HOTMAIL.COM
Hi Liu,
which is the price of samples here cnc ? I´m in Chile.
so very nice and beautiful and I liked
Hi Peter, I just made this for sample to show the machine working ability to customers. You may search "v bit" in my channel to see tutorials of making this kind of tool path.
Is 6kw Not a Bit overkill on wood?
Hi, could you please tell me where I could find details and price of the machine? Thanks
what did you do it in JD Paint?
Sam Sam sorry, but I don't use JD
What software you are using sir?
Hi i am looking for a económic software i am starting on it i got a 6040 cnc can you recommend a good one the machine came whit mach3 but I need one to designing thank you
send email to me, my email is cnextracnc@gmail.com whatsapp: 0086 15562628072
I think Haixun software should be ok, You may whatsapp me +86 15621880885, we can talk about the detail.
Haixun is for Cabinet designing and nesting. It's for 1325 or bigger machines, especially for furniture production line (auto loading and unloading with cnc router). Know your software better before selling it, Miss.
For how to make the tool path, please watch ua-cam.com/video/AfRk8wLlGK8/v-deo.html
LIU XIN Noted and tks Mr.Liu.
Thanks, I watched it, yesterday i found a software. It's very similar like yours (aspire vertic) .. Now I get it! Amazing :)
what software i should use with this machine please?
any CAM software is OK. such as artcam, type3, etc.
thank you very much
COMO FAÇO PARA COMPRAR UMA AQUI NO BRASIL
Si how to fix a spindle not run or round
Hi, what is software used to out G-code ?
Phú Nhật Bùi ArtCAM
sirve para metal?
Sir how to fix a spindle not run or work
SENSACIONAL,DESLUMBRANTE,MAGNÍFICO.
Hi! that picture where I can get it? Great job, congratulations
uanto custa?,tem uma maquina dessa doméstica a menor custo,para quem esta começando?
good programming on Artcam I guess, a few fine points not fit but it looks great...
Thanks for sharing :)
Is it possible to have a G-code copy to test of my DIY cnc?
it has auto tool changing feature?
this one doesn't but we have other machines does. check this one ua-cam.com/video/30hTjYfNle0/v-deo.html or email for more details. instantlx@gmail.com
perfect carving machine 👌
I am very interested in the machine I am from Bolivia. What is the hourly cost of the machine?
hello man. could you please teache me how to do the program?
For how to make the tool path, please watch ua-cam.com/video/AfRk8wLlGK8/v-deo.html
kindly inform me about the cost of the machine with specification and origin
Hi, please send email to instantlx@gmail.com then I'll send you quote in detail.
hi dear, we can also offer the same machine. you can contact me whatsapp+86 15508689532
We are cnc router machine factory from China,if need machines,plz contact me by email chernny.chen@gmail.com or whatsup:008613573772459 skype:chernny.chen
whatsapp me +8618364133900,or email:support@omni-cnc.com
what program uses this??
Why it's movement's so random?
Probably because he let the software to make the g-code and it do it with the safer and algorithm that have.
While I was fascinated by the technology I was somewhat saddened. If we are not careful, technology will take the human touch out of creating such beautiful things and reduce the art to soulless machine work.
How this works? It is computerized?
Yes, I made toolpath (G code) in computer, and let the machine CNC system read the toolpath file and start the work.
Do you have any dealer in India & how much will it cost in India in rupees
call on 9820610769
cuanto cuesta la maquina, gracias
+Miguel Aroca email me: instantlx@gmail.com
Hello , good ias , I would like to know what the cost of this machine. I am from Ecuador
Только плюс !
😎
how much does it cost?
email me instantlx@gmail.com for detail. we have various machines to do this work.
Man, this is so cool.
I need it, can you ship to Saudi Arabi?
How I can order
saad saleem Yes, I can sell machine to most countries in the world. Please email me and I'll tell you more detail: instantlx@gmail.com
+LIU XIN pablokatzman@gmail.com
email to support@omni-cnc.com or whatsapp me +8618364133900
Wonderful work.
what price for this item ?
You have this prodact in dubai if you have tell me it's pric
I sell it in China, if you want to buy it please email me instantlx@gmail.com
what the 3d speed ... in machine dsp
very nice. i like to full information this mainline
you send this cnc router for Brazil?
where can I get one
email me instantlx@gmail.com. I sell it in China. I can export to you.
a zhang
we have two factory produce cnc router and laser machine,if you want more info,please likdly add my whatsapp:+8615853106282
email to support@omni-cnc.com,or whatsapp me +8618364133900
Hi liu i'm interesting to' this machine can you tel me the shipping price to italy?and ha e you a similar machine but With less price?
Stex shipping to Italy 1325 machine is about 150 USD. yes we have 1325 with lower power spindle such as 3.5kw, price starts from 8,600 USD FOB Qingdao. Please email me so I can send you specs in detail. instantlx@gmail.com
Very nice
I hope make like this in my machine
How to toolpath this vector.. plzz sir.. give to link toolpath video....
For how to make the tool path, please watch www.youtube.com/watch?v=AfRk8...
Thank you sir...
Qui tient le machine ?
emaiL me please instantlx@gmail.com
very nice, and app coming groth
hi guy's dose anyone know how much this machine cost ...!!
This one price is 12,500 USD now. without delivery cost.
contact me instantlx@gmail.com for more detail.
LIU XIN Can we bring this machine to turkey, sir, how communication can go
Yunus Gülmez Of course, please email me instantlx@gmail.com and I send you specs, price photos in detail.
thank you..:) I am e mail:fenerliyunus_100@hotmail.com
I threw you an e-mail
I request from you to me in detail the characteristics of the price which I prefer especially servo motor ..
and I'm glad you specify here how we can supply.
hola cuanto cuesta la maquina
whats app: +008615064149218
so very nice and beautiful
Hi Liu, how much is this machine to Brazil?
and in mexico?
i have a shopbot how can i do that
I want one. Fabulous piece of kit
we also can supply this kind high quality and good price machine. please contact me ,email:scarlett@cccnc.cc skype: scarlett gao
hi dear, we can also the same machine, you can contact me, wahtsapp +8615508689532
We are cnc router machine factory from China,if need machines,plz contact me by email chernny.chen@gmail.com or whatsup:008613573772459 skype:chernny.chen
whats app: +008615064149218
Liu Xin whot is the price miling router cnc like this one*in euro or dolar
1325 model
1300x2500x200 (x,y,z) work size
6kw air cooling spindle (China brand)
Delta servo motors (Taiwan)
Rotary axis size: 150mm x 1500mm (diameter x length)
5.5kw vacuum pump
Dust collector
Price 16500 USD FOB Qingdao.
There are other options for better performance or lower price. It depends on your demand.
how to gate this machine
good work man
hi great work
can u send me this dxf?
You should really try to optimize your toolpaths for less rapid travels. You could save loads of time.
how much is this cost please
email me instantlx@gmail.com
Please inform what about rate us dollers
I want to know how to insert program
please refer to this ua-cam.com/video/AfRk8wLlGK8/v-deo.html
LIU XIN hi i need learn V-bit carving
work in Type 3 ou non
как такую уп на арткаме сделатт?
+Назарич Братка Фрезеровка по средней линии.
HOW MUCH IS THE MACHINE PRICE IN INDIAN RUPIS
Neat and tidy!
why is 6000w better than 1500w???
+Nessa Turner stronger. it means 6kw holds bigger cutting tools and can run on faster speed. save more time in work. 1.5kw spindle only used on ball screw machines such as 0404, 6090, 1212. For most woodwork we recommend 4.5kw or higher.
my OCD. no! the video is just one second off from being completely even.
19:59 just add one second and it will be even.
بكم سعر هذه الماكينة
instantlx@gmail.com
hi sir how make this file enroute4 software? ???
Mirza Sahib sorry but I don't have that software of enroute
What is name this machine ? I want it
It's cnc router, email me and I'll send you more specs and info.
wonderfull, very becautyfull
Dat nguyen van Thank you. It was my first time to make tool path this way. I should have optimized the tool path to make the whole work more smooth and faster.
chào anh.e cài mastercam x5 nhưng khi cài xong nó không hiện trục tọa độ.a hướng dẩn giúp hoangsonbl@yahoo.com
كام سعر المكينه
Hi how toolpath sir please
Meu deus do céu q negócio e esse???? me fala como eu aprendo fazer isso ai