Setup your hacked Switch with the Pico 2040 mod chip

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 328

  • @DevnMEleven
    @DevnMEleven 5 місяців тому +17

    Dude tysm for this! I am a complete noob at the Nintendo Switch stuff. Mine was patched so had to hard mod it and dude.. I thought this was gonna be a walk in the park... lmao. I've modded over 200+ Xbox 360s and it did not prepare me for how tiny the capacitors that needed to be soldered were on this thing. I did not have a microscope so it was pure guessing on if I had the chip connected to them or not lmao. Luckily I somehow got it first try and your videos have been an ABSOLUTE blessing! Seriously, thank you so fuckin much for your dedication man!

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +3

      Ha no problem I had to get a scope mind you I found out my phones camera hooked up via Srcpy to my windows worked really well for one of my lites as well! I could have saved $150 on the scope in that case but way to late to return it. Glad you got yours hacked so many opportunities open up with a hacked Switch I just wish the big N would realize what they COULD do with their games.

    • @undeadgenesis6713
      @undeadgenesis6713 3 місяці тому +2

      I’m currently waiting for my v1 and v2 modchip to ship in for this modding project, hopefully I have as much luck as you 😅🙏🏽

    • @SicketMog
      @SicketMog 25 днів тому

      SO possibly dumb question but... What does this mod do? Does it allow you to play downloaded Switch-games? I collect, so piracy is not my main aim, but I want to avoid bringing physical games outside with me so that's why I would want a mod to do that.

    • @iaincowell9747
      @iaincowell9747 День тому

      @@DNAMobileGaming will it work the same on switch lite

  • @lum1lad775
    @lum1lad775 5 місяців тому +34

    Thanks but the more videos i watch the more confusing it becomes, I've never seen the same method twice...

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +11

      Well this works and updating it even works it's really not that complicated the only hard part is installing the chip.

    • @shawnthorn2693
      @shawnthorn2693 4 місяці тому

      @@lum1lad775 me 2 I went ahead and bought the oled Zelda switch with a mod chip installed and I’m still lost I can get custom themes kinda and it works great but it’s way to complicated for me

    • @ReqISz
      @ReqISz 3 місяці тому

      @@DNAMobileGaming Can i connect to WIFI with custom FW? And try install games from Tinfoil? Its safe?

  • @MegaManZer088
    @MegaManZer088 7 місяців тому +10

    I tried to do the partition setup couple of years ago when I did my switch, but the guides where badly explain, now i got a switch lite that I'll be working on soon, and this guide will be handy. Thanks.
    Ps: the mario kart game is asking you to update probably because has an update or a dlc that requires the new firmware version.

    • @DNAMobileGaming
      @DNAMobileGaming  7 місяців тому +1

      Oh awesome, the other partitions would be for flashing Android as well btw but I didn't care much for Android way way back when I first hacked my V1. I knew that about Mario Kart too when filming this I didn't expect it to ask me to update though so it threw me off at the time 😂.

    • @TTVAfluenza
      @TTVAfluenza 5 місяців тому

      lites cant be hacked or modded yet

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +4

      They sure can be hacked/modded I've now hacked 6 of them 😁

    • @charn00h
      @charn00h 5 місяців тому +2

      @@TTVAfluenza I'm just finishing up my Switch Lite using this guide :)

  • @jason9139
    @jason9139 6 місяців тому +2

    Thanks so much man. Exactly what I needed.

  • @MinnaghYT
    @MinnaghYT 2 місяці тому +1

    Just finished modding my switch lite following the Pico Fly Mod Chip 2040 Install tutorial and it flashes blue then green but shows nothing on the display at all, even following the first part of this tutorial installing Hekate nothing shows up on screen when starting it up, Just backlight

    • @Heinrich801703
      @Heinrich801703 2 місяці тому

      Yo may need to flash the Pico because it didnt come pre installed

  • @kripusek
    @kripusek 3 місяці тому +3

    I have a second problem. After i go into the launch menu and choose anything it shows the hekate loading screen and after that there is a black screen. Do you know how to fix it?

    • @Obenfiquista81
      @Obenfiquista81 3 місяці тому

      happened to me to. how did u fix it?

    • @kripusek
      @kripusek 3 місяці тому +1

      @@Obenfiquista81 I used switch . hacks . guide instead of this guide.

  • @MultiGenesis666
    @MultiGenesis666 4 місяці тому +2

    Followed your video all the way up to enabling emuEmmc once it finished and it was enabled my switch started to glitch and once rebooted it won't do anything now. Power buttons doesn't do anything and I checked my solder points. What could be wrong?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      I will have to make a video about this because this guide is only for 18.0.1 and there's a specific way to update the folders then do this mod. You have to follow the steps here, then add the new update for 18.1.0 to the the folders after you've followed these steps. After that you will boot into the emmuc.

    • @MultiGenesis666
      @MultiGenesis666 4 місяці тому

      Does this still apply if I already copied over the newly updated files that you provided in the description I started with the newly updated files not the old ones

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      @@MultiGenesis666 yes so how I've been doing Switches for locals is by updating the files after I do all the steps shown. Then booting if that makes sense.

    • @MultiGenesis666
      @MultiGenesis666 4 місяці тому

      Yeah that kinda makes since, should I just wait for your next video? And do you think that will fix my issue? Because as of right now there is no life from my switch after enabling muemmc and then rebooting. I appreciate the quick responses, I'm new to this

  • @geggyboy1269
    @geggyboy1269 7 місяців тому +2

    Thanks for the tutorial man. Much appreciated.

  • @BobTheBuilder93839
    @BobTheBuilder93839 7 місяців тому +11

    Only if I had a switch 😢

    • @thetruejay20
      @thetruejay20 5 місяців тому +5

      LMAO why you watch video then?

    • @jsepe9356
      @jsepe9356 Місяць тому

      I’ll sell you one lol

  • @JuanSanchez
    @JuanSanchez 7 місяців тому +1

    I've been waiting for this to drop.

    • @DNAMobileGaming
      @DNAMobileGaming  7 місяців тому

      Ha it's actually been done for over a week I just had to finalize it 😂

  • @TheSari43
    @TheSari43 6 місяців тому +1

    6:20 hello i didnt have the title.keys in my folder, so i couldnt transfer it to my pc. Is that a problem?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +2

      No that just means you didn't have any titles installed

    • @TheSari43
      @TheSari43 6 місяців тому

      @@DNAMobileGaming thank u for the quick response. You are the goat!

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      No problem 😁

  • @Lixef_TV
    @Lixef_TV 5 місяців тому

    for some reason whenever i try transfer the backup to my PC it goes most of the way and then tells me that there's not enough space, when there is definitely enough space on my drive, like 300 gbs of space.

  • @javierdelgado3915
    @javierdelgado3915 5 місяців тому

    I didn't get a title keys file for some reason, up till the step where you moved your backup folder out the switch

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +3

      You'll only get those if you had games installed

  • @brunocardoso1549
    @brunocardoso1549 Місяць тому

    HI
    I did my first installation of an rp2040 and everything went fine, I installed it on the SD card and everything turned on the first time. When starting tinfoil it gave an error. I was checking and saw that there were updates. I installed the updates and at the moment, a blue screen appears regardless of whether it boots from the original or emmc.
    Can anyone help me?
    I'm new to these adventures.

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      You need to use the applet mode of Tinfoil and make sure your dns settings are blocked plus you're connected to the internet.

    • @brunocardoso1549
      @brunocardoso1549 Місяць тому

      @@DNAMobileGaming At this moment the system does not start. neither emmc nor stock, the screen turns blue

    • @miguelleiriao8260
      @miguelleiriao8260 Місяць тому

      ​@@brunocardoso1549 i also had a bluescreen on my Switch, try opening the switch, disconnecting the battery connector, and reconnecting it, now i can boot it to Hekate. I resolved the issue by installing the latest versions of Hekate, Atmosphere, and Sys-patch. While I couldn't get Tinfoil to work, I used Awoo-Installer as an alternative, which worked great

  • @GymMatica
    @GymMatica 3 місяці тому

    Hello, i follow the steps exactly. I've become an error.
    Unknown pkg1 version. HOS version not supported! Or enuMMC corrupt! Trying backup bootloader.. Found Pkg1 (''). Unknown Pkg1 version. HOS version not supported! Or eMuMMC corruot! Failed to 1aunch HOS! Press any key...
    EKATE - IPL
    stom NX Bootloader
    The EMUMMC cannot be corrupt because the switch Start smoothly in OFW.
    Pls Help me😢
    The OFW is 15.0.1

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому +1

      Not sure this is for 18.0.1 that is probably why it's not working, you can update to 18.1.0 if your Switch isn't banned however really never had this error.

    • @GymMatica
      @GymMatica 3 місяці тому

      @@DNAMobileGaming thanks for your Quick Response. I try with 18.1.0 again😊

    • @TadhgClarke
      @TadhgClarke 3 місяці тому

      @@GymMaticadid you get it working I have the same error

    • @GymMatica
      @GymMatica 3 місяці тому

      @@TadhgClarke I Updated my OFW from 15.0.1 to 18.1.0 (official). I do the complete Process again an Switched my SD Card from 128 GB to 256 GB. I don, t know why but it works.

    • @TadhgClarke
      @TadhgClarke 3 місяці тому +1

      @@GymMatica I figured out the problem it was just the sd card turns out it was fake

  • @supremekinglobin
    @supremekinglobin 2 дні тому

    i get the error "failed! Payload, is > 128kb!"

    • @DNAMobileGaming
      @DNAMobileGaming  2 дні тому

      Well follow the guide you must have missed something perhaps as I'm assuming you're probably on the latest firmware.

  • @jtav1989
    @jtav1989 2 місяці тому

    My switch is not showing up on my pc when connected thru usb tools. to move the backups. Any reason why?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      Check your windows drivers make sure there aren't any updates pending. You could also check your usb cable could be that too.

  • @same4718
    @same4718 5 місяців тому

    Can you help me with something?
    I have difficulty fiding the correct answer to to where solder the wires that come from the console. RST, Clock, dat0, etc the pico fly chips have the pi out for the wires like A, B, C, D, 3.3v. what's the correct wire instalation?

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      ua-cam.com/video/GBFDF9afJic/v-deo.html
      ua-cam.com/video/nAHYMIbuq6w/v-deo.html

  • @alturabm5442
    @alturabm5442 3 дні тому

    hey
    so i have 3 questions the first is if i have the modchip i don't need the rcm jig right?
    the 2nd questions is i have a Switch with a modchip so how can i format it and rehacket like you
    the last one is if i have a different modchip would that matter ??

    • @DNAMobileGaming
      @DNAMobileGaming  2 дні тому

      No the jig isn't required, if you have a chip installed you just need to setup the SD card again, not sure if other pico boards are different the only thing that might be different is the loader on those boards but I'm not sure as I've always used the ones shown.

    • @alturabm5442
      @alturabm5442 2 дні тому

      Tysm 🙏🏻🙏🏻

  • @dade0507
    @dade0507 2 місяці тому

    I have a problem when i try to launch cfw emummc or stock sysnand. when i try to launch them it shows me a blue screen, can someone help me?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      Did you enable emuMMC after you partitioned your SD card like shown in the guide?

    • @dade0507
      @dade0507 2 місяці тому

      @@DNAMobileGaming Yes, but I solved it anyway. I had to redo it from scratch

  • @Gabe_91
    @Gabe_91 Місяць тому

    Hey, ive been trying to figure it out for 2 days already but when I put all the latest files for atmosphere and hetake into the root of my switch sd card the switch doesnt boot into hetake and just says no sd card. Im not sure what i did wrong maybe the sd card reader?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      If you put the files properly, tried a different sd card, and tried formatting your SD card to exfat, it could just be your reader. If you're doing it with a V1/2 Switch make sure the SD card reader is seated properly.

  • @nightfire2015
    @nightfire2015 5 місяців тому

    Ive got to the part where you get the prod and lockpick rcm. But i am missing the title keys file?

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +1

      You don't need the title keys 😔 that's only if you had games installed

    • @nightfire2015
      @nightfire2015 5 місяців тому

      @@DNAMobileGaming thanks for the reply, I got the title key files now, but now, I have -"A fatal error occurred whin running atmosphere - Program ID
      : 010041544d530000 - error Desc : std:: abort() called (0xffe)"
      I looked up what to do, it said to deleted named as the program ID in the contents folder but I don't have any thing with that ID.
      I'm on a switch lite, I think my OFW is 18.1.0

    • @nightfire2015
      @nightfire2015 5 місяців тому +1

      I did the whole process again and the same error comes up

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      @@nightfire2015 well this is for 18.0.1 you just need to update the files from github to support 18.1.0

  • @mxracingunlimitedltd7784
    @mxracingunlimitedltd7784 9 днів тому

    Where did you get those Joy-con's? I like that Nintentdo Switch Lite D-Pad!! Great video! thx

  • @diesel2o07
    @diesel2o07 4 місяці тому

    I have a problem booting hekate it boots up then everything freeze and power goes to 0% then everything else temp to

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      Not sure what that would be, maybe you soldered something wrong. Double check that you soldered your capacitors correctly and there isn't any bridging.

    • @diesel2o07
      @diesel2o07 4 місяці тому

      OK thanks

  • @Febmaster
    @Febmaster 4 місяці тому +1

    Thanks for your Tutorial! Followed everything on a OLED Switch. But when starting custom firmware the first time it shows fatal error on Program ID: 010041544d5300000. Any clue how to get rid of this?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      Yes you need to update everything, remember you're running the emunand off the SD card technically. I've done a few 18.1.0 Switch's and I explained what needs to be done in the pinned comments and description. Hope that helps.

    • @Febmaster
      @Febmaster 4 місяці тому +1

      ​@@DNAMobileGamingthanks for your answer! Really appreciate it! Do I need to update everything from scratch or is there only a new Hekate etc. necessary?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      @Febmaster so what I've been doing. First I follow my own guide which is this one. Then I make sure to check that all files are on the SD card still from the files shared. Then I copied the updated Hakate/Atmosphere and booted CFW.

    • @Febmaster
      @Febmaster 4 місяці тому

      ​@@DNAMobileGamingthanks a lot! Finally it is working after updating the files with latest Hekate 6.2.1 and Atmosphere 1.7.1 and running the archive bit fixer in Hekate.

    • @Febmaster
      @Febmaster 4 місяці тому

      Finally I managed to get RetroArch running and tinfoil installed. For this I needed to update the SigPatches, updated fugee.bin in the bootloader folder and also added a new bootentry for Atmosphere CFW into hekate_ipl.ini containing
      [Atmosphere CFW] payload=bootloader/payloads/fusee.bin
      icon=bootloader/res/icon_payload.bmp
      After that I rebooted into Atmosphere via the newly added start button with fusee payload.

  • @andretti10
    @andretti10 6 місяців тому +5

    Good stuff! When's part 2 coming?
    Subscribed 👍🏾

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +3

      Hey part 2 as in what to do now sort of deal?

    • @andretti10
      @andretti10 6 місяців тому +5

      @@DNAMobileGamingyeah exactly. Would love to see a demonstration of features as well as maybe a tutorial on how to set up Android.

  • @combatfanatic812
    @combatfanatic812 4 місяці тому

    Got a new SD card so doing this process over.. For some reason, I'm stuck on "checking for available free space" when trying to backup the eMMC, but works on the old and smaller SD card. Any idea why?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      Do you have free space on your SD card? Did you try formatting the SD card before using it? I just did a video about 18.1.0 but it won't be released until next week and everything worked fine with my 256GB micro SD so not sure about that error.

    • @combatfanatic812
      @combatfanatic812 4 місяці тому

      @@DNAMobileGaming The new SD card is formatted, I think it may just be that it's defective since it is very very slow. The old and smaller SD card works fine. Will update when I receive a replacement

    • @combatfanatic812
      @combatfanatic812 4 місяці тому

      @@DNAMobileGaming so I got a new SD card and it seems like the one I returned was defective. I simply cloned the small one I had onto the bigger one and sized the partition accordingly. Everything is good now, thanks for the help.

  • @stevebofferding5563
    @stevebofferding5563 Місяць тому

    Hey,
    I have a V1 Switch and followed your setup, When i launch CFW (EMUMMC) I get: Unkown pkg1 version HOS version not supported or corrupt. and a yellow screen when loading stock(SYSNAND) or CFS(SYSNAND) I did already load the new atmosphere / hekate version from github. Is there a known fix for my case?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      You most likely need to update my files with the latest version of Hakate, sysclk, fusee, and atmosphere.

    • @stevebofferding5563
      @stevebofferding5563 Місяць тому

      @@DNAMobileGaming Done besides the Sysclk, which one i did not find, btw thanks for such a fast reply
      This is stated in the github: Note: sys-clk-overlay requires to have Tesla installed and running.
      Those this affect me as i am not able to use any programms yet in this state?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      @@stevebofferding5563 firebasestorage.googleapis.com/v0/b/fir-tutorial-7a2eb.appspot.com/o/Sys-Clk-Pack%20DMGCLan.zip?alt=media&token=0cc6a6fb-f445-4633-a667-f5393fe9614b

    • @stevebofferding5563
      @stevebofferding5563 Місяць тому

      @@DNAMobileGaming Thanks a lot for the fast reply it did fix the problem in combination with higher quality sd card.

  • @Bari2000
    @Bari2000 5 місяців тому +1

    Can i Format my SD Card to exfat because i don‘t can transfer big roms files to FAT 32

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      You don't need to transfer anything apps like Gold leaf can directly install to your SD card. Your card also doesn't get formatted to Fat32 on the partition is set this way.

    • @Bari2000
      @Bari2000 5 місяців тому

      @@DNAMobileGaming No, you didn't understand me correctly when I prepare the SD card, do I have to format it FAT32 or does Exfat also work?

    • @Bari2000
      @Bari2000 5 місяців тому

      Because I want to put NSP ROMs on the SD card to install them with Tinfoil, the problem is that if the SD card is FAT 32, you can't put files larger than 4 GB on the SD card. That's why I ask if I can also format my SD card to exfat when I prepare it with atmosphere

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      @Bari2000 just connect an external drive or PC and install them from there. I've done this with plenty of my game backups without having to transfer games to the card, install them, then move them back to my computer again.

    • @Bari2000
      @Bari2000 5 місяців тому +1

      @@DNAMobileGaming Ok thanks, but I still have a question, does the SD card have to be FAT 32 or does exfat also work?

  • @YT-ks9go
    @YT-ks9go 3 місяці тому

    This works on a V2 switch. When I try the same instructions on the OLED switch at 05:10 in the video, the payloads do not show for Lockpick? It also took 70 minutes to backup. Are these instructions the same for the OLED switch?

    • @ShanmukhGudivadaGamingGeek44
      @ShanmukhGudivadaGamingGeek44 9 днів тому

      Did you find the payloads? i am not able to see them.

    • @DNAMobileGaming
      @DNAMobileGaming  9 днів тому

      Yes these are the same for the OLED model, however your OLED probably has newer firmware then this video.

  • @joshuaoliveros3260
    @joshuaoliveros3260 2 місяці тому

    The stock and sysnand are conflicting on each other when i download something on sysnand it goes to stock also how do i prevent them fusung or merging?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      Follow the guide, I've never had this issue you must have done something wrong when you partitioned your card and created the emuMMC.

  • @azuolasv
    @azuolasv 4 місяці тому

    when i did the partition emmumc, my switch folder is gone, what now?

    • @azuolasv
      @azuolasv 4 місяці тому

      i got only bootloader emuMMC and payload in the sd card, cant see switch folder and others.

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      @azuolasv did you copy the folders back over as I mentioned you might need to do this after partitioning.

    • @azuolasv
      @azuolasv 4 місяці тому

      @@DNAMobileGaming i did move only the hatake folders

  • @Salazar769
    @Salazar769 6 місяців тому

    Hello, I have a problem. I have a 256 GB SD but when I put it in the OLED switch, it does not recognize the boot. Note that I put the latest version from your page. but if the switch recognizes it, I have it in FAT32

  • @DeanWhyte-t4o
    @DeanWhyte-t4o 3 місяці тому

    hey whats up bro can you help me i was trying to copy the files from the switch folder but i don't see the title keys

  • @kaskadere1335
    @kaskadere1335 4 місяці тому

    I have a v2 switch with modchip installed I did all the steps, updated files everything. System boots into hekate but when I try to launch any of the CFWs or the Stock I just get a black screen. Any help is appreciated

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      Did you flash the Pico board?

    • @kaskadere1335
      @kaskadere1335 4 місяці тому +1

      Thanks for the reply. I found the issue. Basically I bridged one of the connectors that was not supposed to be bridged. After I fixed the connections everything worked fine.

  • @wingate23
    @wingate23 5 місяців тому +1

    Went yo launch cfw (EMUMMC for first time. And says unknown pks1 version. Can u help please

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      What version is your Switch?

    • @wingate23
      @wingate23 5 місяців тому

      V2

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      Firmware version

    • @wingate23
      @wingate23 5 місяців тому

      @DNAMobileGaming 18.1.0 that's what it says on the original switch system software

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      @wingate23 well this guide is for 18.0.1 not 18.1.0

  • @Fabio_Bezerra_Jr
    @Fabio_Bezerra_Jr 3 місяці тому

    amigo sabe me informar se essa é a última versão do firmware para a plaquinha picofly rp2040 ? v2.73.uf2, ou se possui uma versão superior ?

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому +1

      This is the latest firmware I don't have anything higher nor does it need anything higher at this time however you do need to update the firmware files if you're on a later version of your switch.

    • @Fabio_Bezerra_Jr
      @Fabio_Bezerra_Jr 3 місяці тому

      @@DNAMobileGaming Thank you very much my friend, for clearing up this big doubt for me.

  • @backtac1982
    @backtac1982 3 місяці тому

    I have used the rcm method but i want to install a mod chip so i do not have to inject the bootloader everytime i restart the console.
    Can i just use my current SD card after the installation of the mod chip? So far i could not tell any differences between this setup and the one ive already made :)

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      The RCM method only works with the V1 Switch that isn't patched, this is hard modded meaning you don't need to connect it to your pc or anything it just works off the Pico chip.

  • @jondis8588
    @jondis8588 Місяць тому

    I've been getting SD and Emmc Data do no match any solution to that?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      Then re do it as you missed an important step.

  • @bshinjp
    @bshinjp 3 місяці тому

    New versions of Hekate and Atmosphere was released, I updated both to your "All Files" directory. And I noticed that "Bootloader" and "Config" folders were not updated and pretty much untouched. Does this need to be updated too?

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому

      I mentioned in the pinned comment and description you would need to update if on 18.1.0 yes.

    • @bshinjp
      @bshinjp 3 місяці тому

      @@DNAMobileGaming Yeah that's what I meant, I went to the 2 links you provided in the description and updated both Hekate and Atmosphere. I did some research and realize that I also need to update the sigpatches too. I found the newest sigpatch else where but now I see that people have 3 bootloaders (something toolbox), it appears there are millions of ways to setup everything. Do you think you can make another video for 18.1.0? All the AIO sites that I found are all taken down already...
      Also, after looking into your hekatepl.ini I noticed that it's from the DeepSea AIO from Team Neptune. Should I just use that for the time being?

  • @croc5483
    @croc5483 Місяць тому

    i tried this with the latest versions of the files and it never opens hekate, am i missing a step or what?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      Did you copy all of the files from my video to your SD card, then update them with the latest version of Atmosphere and Hakate after by copying the folders? Oh and is your Switch Lite hacked?

    • @croc5483
      @croc5483 Місяць тому

      @DNAMobileGaming i figured it out but thank you anyway for the extra solutions to keep in mind!!

  • @i.e.2
    @i.e.2 5 місяців тому

    in the beginning you said that you need a micro sd card so does the micro sd card works or not? 0:40

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      You can try the Sony brand I've never owned a Sony Micro SD card but if it's a good card that is SDHC A1V30 or better than sure why not. Just don't cheap out on the card you use.

    • @i.e.2
      @i.e.2 5 місяців тому

      @@DNAMobileGamingthat’s what I did actually

    • @i.e.2
      @i.e.2 5 місяців тому

      @@DNAMobileGamingI bought a micro sd card by sony it’s 1TB V60 A2 3U

  • @theveteranspodcast4163
    @theveteranspodcast4163 Місяць тому

    Hey bud, when I try join your discord it won't bring me to your page. Any help appreciated. Thanks

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому +1

      @theveteranspodcast4163 I turned off Discord for now because I had issues with spam. There's nearly 2000 members and I'm the only one keeping track.

    • @theveteranspodcast4163
      @theveteranspodcast4163 Місяць тому

      @DNAMobileGaming Ahhh man! I could reallllly use some help. Is there any other way of asking you questions about this mod. Driving me crazy hahaha

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому +1

      @@theveteranspodcast4163 discord.gg/wfX6BkhG

    • @theveteranspodcast4163
      @theveteranspodcast4163 Місяць тому

      @@DNAMobileGaming thank you. I added it. I really appreciate it.

  • @bojay_b
    @bojay_b 6 місяців тому

    So I actually installed the chip today (I didn't solder it correctly so I have NO clue how its working properly (I'll fix it eventually), but I've made it to the partitioning point and instead of my files being automatically backed up and restored, I have to do it manually. I'm not exactly sure what I'm looking for, so I just saved my screenshots and images, but do you think everything will still work properly if it formats the sd card with all of the mod stuffs on it? I guess I'll be the one letting you know, but any info on manually "SD UMS"ing would be fantastic. Also, thank you for these tutorials! They were amazing!!

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Hey so when you partitioned the SD card this is creating a fake Nand basically to run the firmware off the SD card rather than the Switch. So your files if you had anything saved on your SD card from your non hacked switch should still be there so as long as you have a card bigger than 64 GB because the partition takes up 30GB ish. Backing everything up is done by USB C to your PC as well, so when you watch the part about backing up your name and other files you need to connect your switch to your PC to copy this over which is approx 30gb as well alongside your keys and screenshot etc. I hope that all makes sense written out, also you're welcome.

    • @bojay_b
      @bojay_b 6 місяців тому +2

      @@DNAMobileGaming actually that does make sense! but now theres a new issue.. I ended up resoldering the resistors just to see if it’d make a difference, and I still end up with the same issue. Once I try to load the cfw (emummc), the screen goes black and nothing else happens. same with cfw (sysnand), but the stock sysnand launches with no problems. any idea?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      @bojay_b did you make sure to follow everything word for word?

    • @bojay_b
      @bojay_b 6 місяців тому

      @@DNAMobileGaming I did, and I thought I replied but I suppose not? It’s because the version of hetake that you’ve provided is out of date, all it needed was an update !

    • @kyledavis912
      @kyledavis912 4 місяці тому +2

      ⁠@@bojay_bis it because you were on version 18.1.0? I’m about to get my switch modded using the chip and I’m trying to find a video/tutorial that will work. I see a lot of people say just use the updated version of atmosphere and hetake or you’ll run into problems. So do I just use the updated versions of hetake and atmosphere and put those on the root of the SD card instead of the ones on the video? Will that work.

  • @freestyla101
    @freestyla101 2 місяці тому

    What about storing the backup on the sd card? Providing it’s big enough. Is that possible?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      What do you mean? Are you referring to storing the nand backup at the one part? If so store it on your computer somewhere.

    • @freestyla101
      @freestyla101 2 місяці тому

      @@DNAMobileGaming yes, the roughly 30gb back up. Though on second thought if the SD card is corrupted it’s pretty useless.

  • @MethodMan-
    @MethodMan- Місяць тому

    Does this work with a hwfly picofly raspberry pi 2040 rp chip and OLED Switch?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      @@MethodMan- this is the hwfly pico switch chip.

  • @maximilianpauly9445
    @maximilianpauly9445 25 днів тому

    My Switch didnt want to boot into emummc any solutions to that?

    • @DNAMobileGaming
      @DNAMobileGaming  25 днів тому

      Probably missed the step to set your emuMMC.

    • @maximilianpauly9445
      @maximilianpauly9445 25 днів тому

      @DNAMobileGaming nope emummc ist enabled i did throw Out the left capacitor when soldering the cable to the CPU May that be the cause?

  • @jayjayhooksch1
    @jayjayhooksch1 6 місяців тому

    Is there a way to open the homebrew menu without having to insert a gamecart? My mobo on my switch lite doesnt read game carts but hoping i can still salvage the switch by modding it.

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Just open the album then click Tinfoil it will install onto your Switch. That way you can install your games directly.

    • @jayjayhooksch1
      @jayjayhooksch1 6 місяців тому

      @@DNAMobileGaming thanks! I was able to follow your guide and get everything installed. However, my date and time is wrong and won't let me use some of my apps. Any advice?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      @@jayjayhooksch1 hey just go to your settings you need to manually set this it won't automatically detect on CFW from my experience.

  • @innout2024
    @innout2024 3 місяці тому

    unable to start software....... applet mode ,, what can i do

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому

      Don't launch it through the Album launch it through the homebrew launcher, apps like Tinfoil won't launch on the latest firmware unless done this way.

    • @innout2024
      @innout2024 3 місяці тому

      @@DNAMobileGaming yes it's working thx ❤️❤️

  • @koselillo
    @koselillo Місяць тому

    hi, i dont undertand the advise for 18 or above, im in 19 version, what should i hange? thanks!

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      @koselillo download files I shared in description, navigate to github pages for atmosphere/hakate then update my files with the corresponding folders inside the zip folder.

  • @denmarin
    @denmarin 5 місяців тому

    Thanks for this awesome video, well done

  • @TwayneReviews
    @TwayneReviews 6 місяців тому +1

    Does this work for a Switch Lite and the folder/file provided... i have installed the modchip on my switch. And i just want to overclock it. I don't kno much so tutorials is my best friend... inside the folder does it has files for overclocking? Or i need to get that separately?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Yes it works for all Switch consoles up to 18.0.1 right now.

    • @josecasado7511
      @josecasado7511 6 місяців тому

      Did not worked on my lite… tried over 30 times BY THE NUMBERS and the EMUMMC never worked

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      What do you mean? Did you install the chip? Does the no SD Card show up with the chip installed? I've now done 5 Switch Lites and 2 regular Switches using this exact firmware for 18.0.1 and 18.0.0. If you need more help I have Discord as well but the video shows everything step by step. I even use my own guides sometimes to refresh my memory lol.

    • @josecasado7511
      @josecasado7511 6 місяців тому +1

      @@DNAMobileGaming Yes, the chip works. The "No SD card" message shows up (if there is no SD card inserted). The Picofly is updated. Hardware parts was eeasy, software part of this mod it’s kicking my azz

    • @TwayneReviews
      @TwayneReviews 6 місяців тому

      @josecasado7511 you might have done something wrong... i ordered my picofly Today and by Saturday I'll be doing the installments... this will be my second time attempting to install mod on Switch Lite. My first attempt was difficult but i ended up doing it. And it was successful.

  • @javierdelgado3915
    @javierdelgado3915 5 місяців тому

    getting fatal error but then i realized I was on 18.1.0. Any work around you might know of??

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +1

      Download my files, navigate to GitHub and update Atmosphere. I linked this for someone else as well.

    • @kyledavis912
      @kyledavis912 4 місяці тому

      @@javierdelgado3915 did you ever find a method for 18.1.0

  • @tszmanmok7839
    @tszmanmok7839 6 місяців тому

    Excuse me, it will works on which serial number’s Switch ?
    Or all serial numbers will working also?
    “I understand it’s just work on Switch , maybe will not work on Oled”
    And just use the SD card step by step follow the video is fine?
    Don’t need to open the machine to welding anything on the board ?
    Sorry for the long questions 🙏🏼

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Yes you need the pico chip I did a video about how it's installed on the V1/V2 and Switch Lite as well.

    • @tszmanmok7839
      @tszmanmok7839 6 місяців тому

      @@DNAMobileGaming Thanks for your reply, have a good day 🙏🏼

  • @Mario-pl3ff
    @Mario-pl3ff 2 місяці тому

    What’s those joycons you got those are awesome i need some

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      That was my custom SNES reshell from eXtremeRate.

  • @jayjayhooksch1
    @jayjayhooksch1 6 місяців тому

    Is the sd card format fat32 or exfat? Ive seen conflicting information on which to use; fat32 is preferred for stability but doesnt let you install games over 4gb or something? Im guessing that means youre using exfat since mario kart is nearly 7gb?
    Any advice would be appreciated, your guides have been super helpful so far. Thanks.

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      The SD card partition gets automatically formatted to Fat32 otherwise the system won't read it.

  • @Ñõkìã-j8s
    @Ñõkìã-j8s 5 місяців тому

    Nothing is showing on my payload help 😢😢

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      Of course not you don't need anything in your payload.

  • @adrenalog
    @adrenalog 7 місяців тому

    Excuse my ignorance and I may be answering my own question but wanted to check with you. So several years ago I did this with my switch with CFW. I remember doing most of this to set it up. Now I was going to get a switch lite with the modchip but it looks like I’m having to do all those same steps as years ago with the SD card. Am I missing what the chip is for? Is it the actual CFW now? But you still have to install all these programs, etc. Great video btw.

    • @DNAMobileGaming
      @DNAMobileGaming  7 місяців тому +1

      The chip flashes a hack using the RasPi chip so it's permanent no jigs or anything needed. The reason you need the software setup after is because you're running your Switch off the SD card initially instead of the nand. The chip needs these files including the preload flasher because it needs to read the firmware of Hakate for example to run on the Switch.

    • @adrenalog
      @adrenalog 7 місяців тому

      Thanks for the info. Will I have to continually update all the stuff on the sd card like in the past even with the chip? Trying to see what the benefits are for getting the chipped switch vs the old method. I means yes I remember the jig. That was a slight pain.

  • @wolvrG
    @wolvrG 6 місяців тому

    I have Switch Lite with 18.1.0. Will adding modchip to it allow me to load up hetake? I have ordered one from AliExpress and its suppose to get delivered in few weeks

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      Just use the files I shared for setting it up, then follow this to update the files for 18.1.0. I only have the 18.0.1 as of right now but it's easily able to be updated if you follow how on the GitHub repository. github.com/CTCaer/hekate/releases/

    • @wolvrG
      @wolvrG 6 місяців тому

      @@DNAMobileGaming Cool. Also, I have 64GB card so I have seen in some videos that they make partition of only 12GB. Is it safe? or full 29GB Partition is required? I only play few games at a time so 2-3 games is fine for me

  • @eugenemercado4527
    @eugenemercado4527 3 місяці тому

    Hi, I missed the step of the lockpick RCM, does it do anything or it will run the mod with no issues? Thanks a lot for the informative tutorials!

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому

      Only required if you had games already installed mostly. No problem too ☺️

  • @kerrybarneyiii1202
    @kerrybarneyiii1202 Місяць тому

    Mine did not have those two payloads 👀

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      What do you mean?

    • @kerrybarneyiii1202
      @kerrybarneyiii1202 Місяць тому

      Well, let me explain my situation a little bit:
      1. My system is a V2, and updated to 18.1 (or something like that, I can’t check rn. But it’s a later version than yours) with no games, a completely fresh system/profile
      2. So I downloaded the Hekate and Atmosphére files for that version. (I only downloaded the top download on each github page). After extracting both of those folders, I only had five items as opposed to your eight
      3. In the vid when you grabbed the two payloads, nothing shows up on mine. So I skipped that part. Then, later in the vid when those parts would show up, nothing showed again. But I thought, based on some comments, that that was just because I had no games yet, so I ignored it.
      Now, everything up until actually launching seems to have worked fine, but now when I try to launch it says something about missing bootloader for hekate.
      So what gives? Should I just restart, wipe the sd and try again, and do something different? Thanks for tour response and help!

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      @kerrybarneyiii1202 well that's why, I state in the description if you're not on 18.0.0 then use my files and update them according. I also tell you where to place the payloads after getting the latest versions. Hope that helps.

    • @kerrybarneyiii1202
      @kerrybarneyiii1202 Місяць тому

      Oh, I thought If I directly grabbed the updated ones on github it would work, will try again when I can!

  • @ahmadfa5160
    @ahmadfa5160 Місяць тому

    I dont have title.keys in my map

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому

      If you didn't have any games or your Switch is reset there won't be anything.

    • @ahmadfa5160
      @ahmadfa5160 Місяць тому

      @DNAMobileGaming yes i have one game

  • @CraftHell
    @CraftHell 6 місяців тому

    If you have the v17.*.* installed and etc.. is there a way to update to 18.0.1 without losing all data?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      I updated mine from 18.0.0 to 18.0.1 without losing data you just use the universal updater to update the firmware but suggested to backup your saves using GoldLeaf then store them on your PC that way you can restore them JUST IN CASE. :D

  • @AnRuService
    @AnRuService 2 місяці тому

    I get a blue screen what dit i do wrong?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      Check your soldering at the GPU capacitors.

  • @XRazeYT
    @XRazeYT 4 місяці тому

    And you you connect to internet or is emmc 100% off all time? Bc of tinf

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      You can connect to the internet just need to set the DNS settings to block the Nintendo Servers however you can't play online games this way but you can still update games and firmware etc. Any games I want to play online I just switch back to Stock FW it's not that hard but most games I don't really play online so it doesn't affect me.

  • @paulzeev
    @paulzeev 4 місяці тому

    I wish i saw this video before createing the emmu partition. Thats all i have done is it still safe to follow these steps?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      Yes these steps still work, the only thing you need to do my files is navigate to the 2 links in the description and copy the updated folders of Hakate/Atmosphere into my main folder which will overwite and update them if you're on 18.1.0. I recently did another Switch and it worked perfectly.

    • @paulzeev
      @paulzeev 4 місяці тому

      @@DNAMobileGaming thanks I'll try this within an hour or so . Yes my console is on 18.1.0 and the hekate V6.2.0

    • @paulzeev
      @paulzeev 4 місяці тому

      Just an update i got these file to work I also updated the sigpatches and everything has been smooth till today I tried installing MK 1 and it cause an issue. It still loads into stock and apparently its some files in EMMc but I'm still not familiar with the files yet all I know is that after trying to install this the emmc doesn't boot. I get the unknown pkg1 and hos version error. Any chance you know where those games go the ones that load correctly from awoo installer ?

  • @fe0xion
    @fe0xion 5 місяців тому

    why is it so hard to find certain game roms and even adding them to the switch is hard lol any tips?

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      Not sure what you mean? I have a video about dumping your games if that's what you're looking for?

  • @abdulazizkudarat2352
    @abdulazizkudarat2352 2 місяці тому

    Do you have a tutorial for 18.1.0?

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому

      There's nothing different from this to 18.1.0 you just need to update the files withing the zip shared.

    • @NormanReaddis
      @NormanReaddis 2 місяці тому

      ​@@DNAMobileGaming
      After the installation when i restarted, it soft brick it. It's showing
      error code 2002-4687
      Program 0100000000000001F

  • @keepitshort4208
    @keepitshort4208 4 місяці тому

    Do you keep the game file after transferring it from your pc, because I don't want to make a copy of the game, is the software
    You can do the same for dlc download?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      You can backup all your games and DLCs using an app on the Switch and do with them what you want in the vicinity of your own home.

    • @keepitshort4208
      @keepitshort4208 4 місяці тому

      @@DNAMobileGaming dbi mtp responder ?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      Pardon?

    • @keepitshort4208
      @keepitshort4208 4 місяці тому

      @DNAMobileGaming I was asking if this is the app ?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      I still don't know what you mean though, app for what?

  • @kripusek
    @kripusek 3 місяці тому

    i dont have the title.keys file. what should i do. i have dev.key

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому

      You don't need them if you didn't have any games installed already then you're fine.

    • @kripusek
      @kripusek 3 місяці тому

      @@DNAMobileGaming thanks. I also tried launching cfw but after the Hekate loading screen there is nothing. Do you know how I could fix that?

  • @dimitar_07
    @dimitar_07 2 місяці тому

    Hello! I want to hack my switch,but my friend told me to buy only lexar sd card, because with other brands it didn't work out for him.Do you have any information about that, because lexar sd cards are quite expensive for me.

    • @DNAMobileGaming
      @DNAMobileGaming  2 місяці тому +1

      I just added the two cards I standby and still use to this day.

  • @i.e.2
    @i.e.2 5 місяців тому +1

    Does the sony micro sd card works?

  • @officialatomo
    @officialatomo 4 місяці тому

    Just curious. I own digital games. I can still play and access them using stock sysnand? And I won’t be banned right

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      You can switch back to your original firmware yes and you won't get banned.

  • @lcwintergaming4511
    @lcwintergaming4511 4 місяці тому

    hi did u make part 3 to this video ?

  • @Denisstrix
    @Denisstrix 3 дні тому

    lock pick rcm dont find title keys

    • @DNAMobileGaming
      @DNAMobileGaming  3 дні тому

      You don't need the title keys if you never had any games installed.

    • @Denisstrix
      @Denisstrix 3 дні тому

      @@DNAMobileGaming ah ok thanks i got this switch today :D it works well after setting it up thank you

  • @Moonpoints
    @Moonpoints 6 місяців тому

    can I use the stock firmware to play my physically owned games online still or will I get banned for that?

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Yes to can switch back to stock everything is loaded on the SD Cards partition basically so if you take the SD card out your Switch will act normal when switching back to the SFW

  • @Moour3331
    @Moour3331 6 місяців тому

    Just modded mine for the first time, maybe it was a typo but does all of this work for 18.0.1 now ?

    • @Moour3331
      @Moour3331 6 місяців тому

      Oops I missed the pop up you put on the screen. Thanks !

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      Ha yup it does still work.

  • @eyeyamjstn628
    @eyeyamjstn628 5 місяців тому

    Can I use a Mac for the pc portions?

  • @Powerboll
    @Powerboll 6 місяців тому

    does it also works on an system whit 18.1.0 whit an modchip?
    (u helped me a lot installing the modchip)

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Yes there is an updated version for 18.1.0, also no problemo glad to help it actually gets easier the more you do them 😜

    • @Powerboll
      @Powerboll 6 місяців тому

      @@DNAMobileGaming do I have to download any new files or are they all good that u linked in the video description

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      @Powerboll if you're only 18.1.0, download my files then navigate to site below and follow what it says. You just need to copy the files to the folders they say on GitHub to update it

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      @Powerboll github.com/Atmosphere-NX/Atmosphere/releases/tag/1.7.1

    • @Powerboll
      @Powerboll 6 місяців тому

      @@DNAMobileGaming thank you so much 😁👍

  • @TheZooz1234
    @TheZooz1234 7 місяців тому

    Can any switch lite run this hack or only certain models

    • @DNAMobileGaming
      @DNAMobileGaming  7 місяців тому

      No this is for any Switch that's why I just put Switch in the title.

    • @TheZooz1234
      @TheZooz1234 6 місяців тому

      @@DNAMobileGaming so I haven’t got the understand much on this hack, with certain applications will you be able to download games for free or just dump games you already bought .

  • @gladius9267
    @gladius9267 3 місяці тому

    Does this still work with firmware 8.1?

    • @DNAMobileGaming
      @DNAMobileGaming  3 місяці тому

      I don't think it works all the way back to version 8.1 that must be a really old firmware I don't even know what the first version was.

  • @chubbydreams6030
    @chubbydreams6030 6 місяців тому +1

    Do you know when you will get the following tutorial?
    Btw, really liked your tutorial :)

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      What following tutorial exactly? Also thank you glad it helped!

  • @JosiahClement
    @JosiahClement Місяць тому

    How to update it to 19.0?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому +1

      Just update all the files to the latest version of Atmosphere and Hakate.

  • @AltoBo123
    @AltoBo123 6 місяців тому

    Cant install Tinfoil for some reason...

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому

      Did you navigate to photos icon and click the Tinfoil installer?

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      @@schmutzhaufen5348 you need to update to the latest firmware.

  • @celeste2772
    @celeste2772 7 днів тому

    does this work on the oled?

    • @DNAMobileGaming
      @DNAMobileGaming  7 днів тому

      Yes it does, it's the same for all Switches if they have the Pico chip installed.

    • @celeste2772
      @celeste2772 7 днів тому

      @ how do i get the pico chip installed? and could this ban me?

  • @AquaHawk-sd1dj
    @AquaHawk-sd1dj 4 місяці тому

    Followed step by step on my Switch about 4 times, updated to 18.1.0 but I get a 2162-0002 error code; very frustrating.

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      This is only for 18.0.1

    • @AquaHawk-sd1dj
      @AquaHawk-sd1dj 4 місяці тому

      @@DNAMobileGaming I'm aware of that but what I meant was that I followed the intructions for updating to the 18.1.0 since that is the version on my switch at the moment and have been getting error codes nonstop. I was following the instructions you gave on some of the commenters having the same issues. Thanks for the reply! Been watching your videos lately; hopefully there's a fix for this soon.

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      Oh okay, so what you need to do first is update the firmware files. Load them into the Switch. Follow these steps and it'll work. I've tested it with a few devices I recently hacked.

    • @AquaHawk-sd1dj
      @AquaHawk-sd1dj 4 місяці тому

      @@DNAMobileGaming Lexar SD cards, FAT32, 7-zip, RP2040 chip. I have tried deleting/updating atmosphere and bootloader. During the process, I even connect to the PC to make sure the files are still in there before I boot. I have tried booting with CFW SYSAND and emuMMC and the error code pops up after showing the "Nintendo Switch" logo. It shows me all the boot options shown in Hekate as seen in the video so it's fine up to that point at least. I have watched more than 5 UA-cam tutorials and nothing. Followed every single step. I had a clean Switch, no existing files, no themes, etc. Read a bunch of forums.... no luck. I'm offering a $20 bounty if anyone can fix it lol

    • @AquaHawk-sd1dj
      @AquaHawk-sd1dj 4 місяці тому

      @@DNAMobileGaming Hey man, quick little update: pretty sure my switch got bricked for some reason; don’t know if it was software or something shorted. Apparently the error code I was getting can happen with RP2040 chips. I attempted the exploit again but used the HATS pack, a different switch, and an older version of switch firmware and everything is working with this one. Thanks for trying to help me out with the other one; it’s a shame that I couldn’t fix it with anything but at least I have one that works now. Thanks for your videos!

  • @ayone9250
    @ayone9250 4 місяці тому +1

    I get this error after trying to launch emummc can anybody help?
    Error while loading fss0: atmosphere/package 3 Wrong ini cfg or missing/corrupt files! Failed to launch HOS!

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      That is because this is for 18.0.1 not 18.1.0 you need to update everything.

  • @chamith256
    @chamith256 5 місяців тому

    is this same for switch lite?

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому

      Well yes as the Switch Lite is part of the thumbnail 😝

  • @jonnyking5124
    @jonnyking5124 5 місяців тому

    does it works with V18.1.0 ?

    • @DNAMobileGaming
      @DNAMobileGaming  5 місяців тому +1

      I answered this already

    • @kyledavis912
      @kyledavis912 4 місяці тому +1

      @@DNAMobileGamingyou actually said it works for V18.0.1 so does it work for both or only 18.0.1? Or is that the same thing

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому +1

      @kyledavis912 v18.1.0 is the latest version of the Switch. All you need to do if you're doing this with 18.1.0 NOT 18.0.1 (which is shown here) is use my base files shared then copy the latest version of Hakate/Atmosphere overwriting the old files in the corresponding folders.

    • @kyledavis912
      @kyledavis912 4 місяці тому

      @@DNAMobileGaming thank you dude. The first person to actually give me a straight forward answer.

  • @maggot238
    @maggot238 Місяць тому

    Does this work for 19.0.0?

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому +1

      Yup it sure does you just need to copy my files then update Hakate/Atmosphere with the latest files.

    • @maggot238
      @maggot238 Місяць тому

      @DNAMobileGaming thank you!!

  • @dnbtit
    @dnbtit 18 днів тому

    dumping my nand was over 50gb and took nearly an hour!

    • @DNAMobileGaming
      @DNAMobileGaming  18 днів тому

      Did you have a lot of games installed? If so that's why.

    • @dnbtit
      @dnbtit 18 днів тому

      @DNAMobileGaming I did, guess I made life more difficult for myself trying to get ahead of the game. I'm still following the steps, but thanks for the video

    • @dnbtit
      @dnbtit 18 днів тому

      @@DNAMobileGaming Followed all the steps and get HOS version not supported or emuMMC corrupt when trying to boot into CFW. Weak. Any suggestions?

    • @DNAMobileGaming
      @DNAMobileGaming  18 днів тому

      You have the wrong files for your Switch then, you need to use the latest guide on the channel that has all the files in one place.

  • @TwayneReviews
    @TwayneReviews 6 місяців тому +1

    I think you should have a Discord community 😅😅😅 tbh

    • @DNAMobileGaming
      @DNAMobileGaming  6 місяців тому +1

      Hey I do have Discord regarding the program for overclocking I didn't share this with these because I didn't want to get into this too deep. It's easy to setup though with Sys-Clk just do some Googling though there's quite a bit surrounding this online.

    • @TwayneReviews
      @TwayneReviews 6 місяців тому +1

      @DNAMobileGaming okay... i will research sys-clk thank you very much... how do i join the discord? I really like your videos sub over 1 month ago

  • @OriginalSithMonkey
    @OriginalSithMonkey 7 місяців тому +2

    Nice

  • @rohansharma8956
    @rohansharma8956 2 місяці тому

    Ngl 12gb is more than enough for a emummc

  • @Ak3ruz
    @Ak3ruz 2 місяці тому

    Thanks that vid makes brick 🧱 it

  • @hermanputra9398
    @hermanputra9398 4 місяці тому

    Do everything and got
    A fatal error occured when running Atmosphere.
    Program ID: 010041544d530000
    Error Desc: std::abort() called (0xffe)

    • @hermanputra9398
      @hermanputra9398 4 місяці тому

      I don't know if I'm wrong or not... I tried downloading latest atmosphere version and paste all the folder inside my switch sd and it worked.. I guess the atmosphere version is not compatible with the 18.1.0? But now Tinfoil "can't start software"

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      This is for 18.0.1 not 18.1.0, but yes all you had to do is copy all the updated versions of Hakate/Atmosphere overtop of my files shared. Then follow the steps, you also need to get the latest version of Tinfoil, it's super buggy though with 18.1.0 I find.

  • @RePlayRetroStudio
    @RePlayRetroStudio Місяць тому

    wow what a disappointment site i Tried to click but An Error

    • @DNAMobileGaming
      @DNAMobileGaming  Місяць тому +1

      Files are fixed I was cleaning up my database and must've deleted the wrong files. They're there now thanks for letting me know.

    • @RePlayRetroStudio
      @RePlayRetroStudio Місяць тому

      @@DNAMobileGaming your welcome

  • @jacquesmazieres5081
    @jacquesmazieres5081 4 місяці тому

    Merci

  • @thetruejay20
    @thetruejay20 5 місяців тому

    Tinfoil 😏

  • @Sissouchaos
    @Sissouchaos 4 місяці тому

    Followed every step but when i go to the launch they said
    "No main boot entries found
    Check that bootloader/hekate_ipl.ini has boot entries or use More configs button for more boot entries"
    Any idea how to fix this ?
    Edit: wait i fixed it now

    • @DNAMobileGaming
      @DNAMobileGaming  4 місяці тому

      I've explained how to fix this already but haven't released a video because by that point version 19 will come out for the Switch.

    • @JoshSmith-os2sg
      @JoshSmith-os2sg 4 місяці тому

      How did you fix this? I lost all my files, added them back and still have this issue. This is the 3rd time I have tried to do this install. :(

    • @gizmorepairs
      @gizmorepairs 5 днів тому

      @@DNAMobileGamingI know you’ve said you explained the solution but I can’t seem to find it anywhere, any chance you could please point me in the right direction. Thank you very much