I believe the phrase is either coin stealer or coin hoarder 😆 Great deal on the Makita and Bosch miter saws, both are top of the line and will last for years.
Now i can't comment on the topdon brand, you keep bringing up here, but I've just got to say that having a battery pack jump starter for your car or truck is an absolute must nowadays. so much nicer than having to ask other people for assistance.
bought a 20volt 1/2'' chuck dewalt drill 5 years ago... as of today, it can hardly drill thru a 2x4 without slipping the chuck or the battery freezing. $300/6month tooling expense when used for daily work. 5 years as a hobby tool...
I have the original Jawhorse, and it's awesome! Mine also has the extended clamping arm, and cross tie clamps to join dimensional lumber into out feed or support extensions. I have a Workmate bench as well, but the Jawhorse is used far more often. I don't know if Rockwell or Harbor Freight versions still have those accessories available. I have the Topdon J2000, and I think you should mention these things need to have the charge topped off every few months. If you leave it in a vehicle for a year it may not work when you need it most.
On screwdriver i get the snap on ratcheting. I bought it in 88 and still use it. The truck had a torque tester and you got a lot more with the snap on design. Im sure others have gotten better since way back then lol. Just bought a new one just to be safe
Dear Den of Tools and friends, tuesday had am injury to two finger the router bit got lose, stiches fractures but only on the tips, any router tool suggestions . It is always good to hear the vioce of Den of Tools
Your router should have come with two wrenches. Use both of them at the same time. One wrench and the shaft lock button does not get the collet tight enough to hold bits.
I had a bluedriver I left in the obd port and after a year it stopped working, got a new one and it’s lasted 2 years since I don’t leave it in but I could’ve just gotten a faulty first device
Dang - I was interested in that Canon color laserjet, but there's definitely a fishhook developing in those ratings. (Also, I'd prefer to get a MFP so I don't have to keep my last inkjet around any more just for scanning, and generally, adding MFP to color laserjets didn't seem to be adding much cost to the ones I looked at overall, especially compared to the costs of just trying to get a decent scanner-only device.)
Not every fishhook is from bogus reviews, so I wouldn't worry. People who have a problem on a high-quality product from a top brand, are 100x as likely to write a review as someone it works perfectly for as expected.
@@denoftools yeah, I have watched a couple of reviews from a torque test channel for there stuff. I stayed away from there 1/2” stuff because it didn’t so we’ll. But that channel had good thing to say about there 1/4” in lbs wrench so I picked that off Amazon . It should be ok for my DIY needs.
Jeff, "My wife is a coin,...what's the word?" Thief. The word is thief. But wives are convinced they can "use", "borrow" anything you own. On a related note: By the time I go find my Swiss coin tool, I can just use my thumbnail or my knife, which IS always in my pocket! Shine On!
Just keep some different sized washers that are the same thickness as a quarter. Your wife won't steal those, and you don't need to spend $13 on an expensive PB Swiss tool.
Hard pass on that iPad. Only 3gb ram. I highly suggest if you are buying a phone or tablet 4+ gb ram at the minimum, preferably 6+. Notebook or computer 8gb minimum preferably 16gb+. The number of cameras is a trash selling point. BUY THE MOST RAM YOU CAN AFFORD. If you have a hard time trying to figure out how much RAM is in a device, it is hot garbage. They don't want you to know.
I believe the phrase is either coin stealer or coin hoarder 😆
Great deal on the Makita and Bosch miter saws, both are top of the line and will last for years.
How about Koin Kleptomaniac?! 🤣
The coin screwdriver is for dzus fasteners. You need it to tune up your p51 mustang or your prostock mustang.
The Dremel Flexible Shaft also fits other brands, such as the M12 rotary tool.
Now i can't comment on the topdon brand, you keep bringing up here, but I've just got to say that having a battery pack jump starter for your car or truck is an absolute must nowadays. so much nicer than having to ask other people for assistance.
bought a 20volt 1/2'' chuck dewalt drill 5 years ago... as of today, it can hardly drill thru a 2x4 without slipping the chuck or the battery freezing. $300/6month tooling expense when used for daily work. 5 years as a hobby tool...
I have the original Jawhorse, and it's awesome! Mine also has the extended clamping arm, and cross tie clamps to join dimensional lumber into out feed or support extensions. I have a Workmate bench as well, but the Jawhorse is used far more often. I don't know if Rockwell or Harbor Freight versions still have those accessories available.
I have the Topdon J2000, and I think you should mention these things need to have the charge topped off every few months. If you leave it in a vehicle for a year it may not work when you need it most.
On screwdriver i get the snap on ratcheting. I bought it in 88 and still use it. The truck had a torque tester and you got a lot more with the snap on design. Im sure others have gotten better since way back then lol. Just bought a new one just to be safe
Thank you again!😊
Dashcam, 4K, recommendations?
I took advantage of some car detailing stuff. Saved about $25 or so.
Thanks!
Dear Den of Tools and friends, tuesday had am injury to two finger the router bit got lose, stiches fractures but only on the tips, any router tool suggestions . It is always good to hear the vioce of Den of Tools
Your router should have come with two wrenches. Use both of them at the same time. One wrench and the shaft lock button does not get the collet tight enough to hold bits.
Nice video today, that for everything!
Thank you!
"Bear". stay healthy. Nice video.👍
I had a bluedriver I left in the obd port and after a year it stopped working, got a new one and it’s lasted 2 years since I don’t leave it in but I could’ve just gotten a faulty first device
Appreciate the work and video! Unfortunately, this event will not cause me to purchase anything.
Any thoughts on the Jessem Rout-R-Lift?
Thanks bear!
Never heard of carcassone but there is a board game named stratego. I could only get 1 person to ever play but it was fun.
Hes so happy about the Recession coming in, like hes super excited to be witnessing it.
I’m 54 do you have any idea how many recessions I’ve seen?
Fyi, I bought the 2 pack aerosol spray back in 2019 for $21. It's 29 now on a "deal"
Dang - I was interested in that Canon color laserjet, but there's definitely a fishhook developing in those ratings. (Also, I'd prefer to get a MFP so I don't have to keep my last inkjet around any more just for scanning, and generally, adding MFP to color laserjets didn't seem to be adding much cost to the ones I looked at overall, especially compared to the costs of just trying to get a decent scanner-only device.)
Not every fishhook is from bogus reviews, so I wouldn't worry. People who have a problem on a high-quality product from a top brand, are 100x as likely to write a review as someone it works perfectly for as expected.
We have 600mi on our Segway scooter
Avid boardgamer, have over 400... very surprised to see you put Carcassonne in this!
The Canon printer has 2 $100.00 toner cartridges!
Tekton torque wrenches where on sale
I love almost everything that TechTeam does, but I’ll be honest they’re torque wrenches or not what I feel should be the standard for the tekton brand
@@denoftools yeah, I have watched a couple of reviews from a torque test channel for there stuff. I stayed away from there 1/2” stuff because it didn’t so we’ll. But that channel had good thing to say about there 1/4” in lbs wrench so I picked that off Amazon . It should be ok for my DIY needs.
A quarter on a stick for 13$.....? but a quarter is a quarter..... 25cents ? What the hell kind of sence does that make?
Because when you can’t find a quarter and you need to get something open $13 is worth it for some people.
22:00 that tool is intender for installing the plug on the bottom of the piggie bank so the kid can't just take it out using a coin.
Our boss purchased very expensive "heavy duty" air hose reels. They didn't last any longer
Monopoly like board game......Careers
Jeff, "My wife is a coin,...what's the word?" Thief. The word is thief. But wives are convinced they can "use", "borrow" anything you own. On a related note: By the time I go find my Swiss coin tool, I can just use my thumbnail or my knife, which IS always in my pocket! Shine On!
😅
#2 comment! Thanks Bear!
Just keep some different sized washers that are the same thickness as a quarter. Your wife won't steal those, and you don't need to spend $13 on an expensive PB Swiss tool.
❤❤❤❤
My wife says all coins belong to her !!!!!
Hard pass on that iPad. Only 3gb ram. I highly suggest if you are buying a phone or tablet 4+ gb ram at the minimum, preferably 6+. Notebook or computer 8gb minimum preferably 16gb+.
The number of cameras is a trash selling point. BUY THE MOST RAM YOU CAN AFFORD.
If you have a hard time trying to figure out how much RAM is in a device, it is hot garbage. They don't want you to know.
Neiko isnt pronounced with a hard eee sound. Believe it or not its pronounced with a hard aaa sound.
Nay-Co.
🇺🇸🇺🇸🇺🇸
Almost the same video as yesterday...
You should change your name another channel has the same name.
I doubt that
@denoftools sorry your other channel bears den.