Ford Transit Engine Management Light EGR Valve Problem Part 2
Вставка
- Опубліковано 9 вер 2024
- Hi guys
Ford transit engine management light egr valve problem part 2
this video i show you how to change the egr valve on a ford transit 2.4 rwd we also take a look at the old one and see how bad egr valves can really get thanks for watching
When you replace or clean the egr valve, you may as well remove inlet manifold to clean and replace gaskets. Ideally cleaning inlet bore on block too if confident enough.
Great videos.. thanks
Looking for a video of this, who's access? First transit I've owned.
@Dosedmonkey They are quite easy to remove... just try to ensure you don't drop too much carbon into the bores when cleaning. Ideally using compressed air to blast down each bore, alternatively using a rag pushed down with a screwdriver.
Search transit inlet manifold removal on UA-cam. Should find something
Brilliant video thank you ❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
i enjoyed yr video cheers ....i used to buy cheap stuff and always end up buying it again ha ha ... human nature to think yr getting a bargain all the best.....
Hi Russell thanks for the comment stay safe buddy👍
Thanks for these two videos - i have the exact same error code and a loss of power when pulling off with my van. Do you think a good squirt of carb cleaner could bring it back to life? It obviously gets clogged with carbon over time, surely giving it a good clean out should bring it back to life?
Hi mate cleaning with carb cleaner will help but only short-term it will need changing and the van will fill like new again 👍
@@ResurwreckAutosUK Was thinking i might just book it in with one of those carbon cleaning services and hope it works. Seems a much cheaper option and will likely see benefits elsewhere - ill ask them about the EGR when booking :)
Great video what make was the second egr from euro parts
Did that sort it for good? Thanks for the vid - would love to see more transit vids
TheMackieBob Hi mate yes it did sort in haven’t had a problem with it 👍
@@ResurwreckAutosUK nice one. Did you try cleaning out the original valve before fitting the shitty ebay one?
TheMackieBob I did try mate but just didn’t clean up enough 👍
I just cleaned and reconditioned one, checked it for functionality using a battery, works fine. But still getting the same error when refitted. Know anyone with knowledge of checking the wiring harness?
You need to clean out your egr cooler it will be blocked this gives the egr code you can also clean the egr use car paint thinners on both
Pro Player Uk Hi pall nice one thanks for that there’s egr valves are a pig to keep clean thanks again mate 👊👊
My auto mechanic broke the screw that holds the agr pipe. The opposite side of the side where the hose connects to the EGR valve. Now he refuses to repair it because too much work?!! Everything has to be removed to get to that broken screw. My question is, is that screw broken in the engine block or does the EGR hose screw directly onto the turbine? My van is whistling right now. Strength is also questionable. Need to fix that, but if it's broken in the turbine, they say I have a big problem, if it's a block engine, then it's not a big problem. What do you think? Greeting
Hi maté sounds like a big problem I would definitely get the mechanic to sort that out tell him you will report him to trading standards I fill you pain buddy it’s a big job stripping it all out sounds like you will need to replace the egr valve
Great vidio the code I have is p2463 and p042f I only have engine light on mine is rear wheel drive so any tips or advice before we start 😀
Can you erase the light with the OBD2 if you use an EGR blanking plate?
Hi mate I’m not sure if that works but worth a try 👍👍
didnt see you showing the coolent draining out? Or how you managed to drain it etc....these are the things people want to know. Removing bolts is simple , so i would of put more into technical bits. thanks anyway. i learnt where its situated and what it looks like
thanks for the fed back I will take it on and try better going forward
thanks for reply. its easy for me to critisise you from a laptop. well done for giving me a insight on things i didnt have a clue about
Hi. Ive just had my egr replaced on mine. 2007 2.4 transit.
At low revs still sluggish and loss of power. But nice and smooth after 2000revs. Any ideas.
Ive had 3 egr valves in 5 years pn this van.
Thank you
Hi Steve that sounds like a turbo problem have that looked into buddy
@@ResurwreckAutosUK hi thank you for reply. I had a new turbo put on a few weeks before new egr valve. As the old turbo had seized. Its an ebay one at £199 new. Is it possible a brand new after market turbo could be faulty.
It kind of judders at low revs. 1500 - 2000 Black smoke. But when engine warm doesnt judder as much. Thank you
@@steven0882 hi Steve yes mate the eBay ones are from China cheap no good try and find a original one reconditioned much better good luck buddy 👍
My van is a 2.2 RWD and although I've got the EGR valve loose, it won't come out of the engine bay. Upwards it won't come past the inlet manifold and downwards the Cooler is in the way. Any advice appreciated!
Hi buddy yeah the RWD one is so hard definitely will need to take down more keep looking on UA-cam I’m sure there is a video on it good luck buddy 👍👍
Hi , I done my egr valve and put clip up on UA-cam hope you dont mind but I mentioned you in my video
Hi mate I hope it went ok changing it and if my video help you in any way change it then that’s fantastic and haven’t got a problem with you mentioning me at all 👍stay safe and good buddy 🤝
@@ResurwreckAutosUK was bit fiddly and didn't help that I got big hands and fat fingers , but your clip helped alot , thankyou for sharing .
Gorgan no problem fat fingers 😂I what to see your channel grow 👍
Como chingos e etiendo i esta en ingles
Hi i have a 2010 2.4 tdci transit and have changed the egr valve already but code still coming back mine is P1402 any idea as i got it from ebay as well shall i get one from euro as well same make as yours or do you think it could be something else as my EML doesnt come on all the time? thanks
Hi buddy the ones from EBay are shit don’t work need to get it from euro car parts good luck buddy 👍👍
Did you consider blanking the egr valve off ? By the way, what's your background, are you a mechanic by trade?
hi I did consider blanking it off a lot of people say do that but I don't know if that would pass the mot
@@ResurwreckAutosUK as far as I am aware, as long as it doesn't cause the EML to come on it should be fine, there's no way it can be checked if the egr is blanked off or not (that's just my understanding)
@@franspeedspares8191 I see what you are saying about the EML but if its blanked off it has a affect on emissions are two high
@@ResurwreckAutosUK possibly, but if you get the engine hot before the test you should be ok, works for me anyway..Glad you got the mini by the way, looking forward to the next video.
@@franspeedspares8191 ok I see what you mean about getting it hot before taking for the mot and ill do a video on the mini because copart let me have it for my bid so after my bid price copart fears and delivery I got it for £1100 I whent a picked up the logbook from copart this afternoon
hi i have the same problem but how do you get them bolts off and do you know where the crankshaft sensor is
thanks in advance for any help
Baptiste Lamont Hi mate the bolts are a pig to get off but you can get to two on top and you need to get the over two from underneath the hardiest thing about this job is lineing up the metal gasket and sorry buddy I don’t know where the crankshaft sensor is good luck pall👍
crankshaft sensor is ---looking at engine...drivers side....back behind manifold...close to exaust...you can just reach it as its reached from top...has electric plug on it...iv just had to get one for my 2002 2.4tdi ..as wont run /keeps cutting out instantly :( hope you find it...fella off forum sent me a pic of engine parts on (catcar.info....its great just put in ford etc and shows you where everything is )
Chirpy Cheza Nomad Nice one thanks buddy 👍
The problem was solved???
Hi buddy yeah new EGR valve good as new 👍👍
pardon my ignorance, but what is limp mode? My van has had the management light on for about 6 years and its the egr valve coming up. just last week the brake symbol and the abs light and the esp light were on aswell the van started losing power as I was driving along city streets doing about 20 - 30 just briefly for a second or 2, 2 or 3 times every minute or so and the speedometer dial was dropping to zero and then going back up. Took it to garage in for 3 days before looking ( I know your all busy.) sorted the brake disc symbol thing but couldnt get the abs light the esp light to go out, told me it was some kind of problem with the abs module and on a van that age he would just ride it, he said it was safe just that the abs wouldnt work, but it is still losing power as I am driving along and the speed dial is still flicking up and down. any body got any ideas what it could be.
Did you ever sort this issue?
@@mattanderson3010 l didn't, but my mechanic did.
Thanks for asking.
@@jamesdiver2183 What did he find wrong? I’ve got the same problem on my work van :(
@Matt Anderson l am not really sure tbh. I can't even remember what he said there was a number of issues. I was looking under the bonnet and noticed like a loose rubber hose that after the repair had some kind of nipple or connection replaced. I'll look out the invoice see if it says anything
Hi Matt sorry that was something else in regards to the start stop and losing power it was the earth terminal just to the right of the battery on to the chassis or body of the van was corroded
Is it a genuine EGR you put in?
Hi mate it was a OEM part not genuine a genuine one are so expensive not worth the money
@@ResurwreckAutosUK Hi and thanks for the quick response.
Also I found Ford one for £89.95 ford casting
Van isn't worth £130 by looks of it! But good luck
pen you are right it’s looking rough 😂 this van has paid for its self 100 times over it’s a work house I just need to keep it going for two more years when I change it for one that meets ulez in London
❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Lol "Euro Crap Parts"
🤣🤣yep
Stop using euro parts, if you wanted better quality go to Ford.
Hi mate yeah I haven’t used Euro car parts for years
@@ResurwreckAutosUK got some genuine parts from GSF cheaper then knock offa at euro parts before.