Toyota Hilux N80 | Piranha Dual Battery Tray Complete Installation

Поділитися
Вставка
  • Опубліковано 3 сер 2024
  • This video shows the complete installation of a Piranha dual battery tray into the Toyota Hilux N80. This is a 2.8l 2020 Hilux and the same tray suits 2015 to current model Toyota Hilux models. This video is part of our digital instructions for the Redarc dual battery kit. Here is a link to the full kit on our website.
    www.aussiedriftertouring.com....
  • Фільми й анімація

КОМЕНТАРІ • 27

  • @stevendouglas6593
    @stevendouglas6593 4 роки тому +1

    Excellent video. I have an ARB tray to fit to my 2019 hilux and this is exactly what I was looking for. Easy to follow instructions well delivered. Thank you.

  • @AllTerrainAction
    @AllTerrainAction 3 роки тому +2

    We had a brand new 2021 Fortuner we found that we just undid the 3 * 10mm bolts holding the main fuse box down allowed us to move the fuse box 5mm which helped us just drop in the N70 deep cycle in no worries. You did manage eventually but for those who aren't sure I can assure you it's an easier way, literally ads 2-3 mins to undo and 5 mins to tighten back up (as 1 screw is in a difficult location after the battery is in). Highly also recommend people consider the low maintenance version than the maintenance free battery as reports say due to warmth in engine bay the battery will dry up, but you may need angle grind a gap on the bracket to accommodate the top up screw holes. 👍 Good video overall though, premade harness makes life easier. 👍

  • @andrewmccormack2742
    @andrewmccormack2742 3 роки тому +1

    Awesome Video, about to put a tray in my 2021 model.

  • @donalcasey3681
    @donalcasey3681 2 роки тому

    Great video mate, really informative. I’ve installed the same tray in my 2016 Hilux but am struggling to get the battery to fit due to the grey clip holding the loom in place. Any idea how to remove that clip?

  • @vishp3162
    @vishp3162 4 роки тому +1

    Great stuff. Where is the best place to send the accessory harness for the fridge at the front engine bay for the latest hilux or the fortuners? With the battery not sure there will be enough space to send through the passenger side? Thanks

    • @AussieDrifterTouring
      @AussieDrifterTouring  4 роки тому +1

      Vish P hey mate. There will be enough room to go through the fire wall grommet on the left side even if the battery is in on the Fortuner. However on the Hilux I would run it from the engine bay aux battery down to the chassis rail and along the under body of the car seeing as on a Hilux most of the time the sockets will be installed in the tub or tray outside.

  • @kaidenh39
    @kaidenh39 4 роки тому

    hey mate good video, what’s the chances of you doing one on the 1GD Prados, i got the kit from you guys, just struggling a little understanding. cheers 👍

    • @AussieDrifterTouring
      @AussieDrifterTouring  4 роки тому

      Kaiden Hinder hey mate we have one for the 150 prado check it out here ua-cam.com/video/DJyc4_69LRg/v-deo.html
      We’re trying to get all models done.

    • @kaidenh39
      @kaidenh39 3 роки тому

      AussieDrifter Touring -Battery Management by Design hey mate thanks for replying, yeah watched that video but unfortunately that’s a 1KD 3 litre engine and not a 1GD 2.8 and a bit of a different set up..😩
      hopefully you guys get around to making a video soon.. love the work you do! cheers🤙

    • @AussieDrifterTouring
      @AussieDrifterTouring  3 роки тому

      @@kaidenh39 hey mate, Have you got your tray installed? if your having any problems figuring it out mate feel free to give us a call.

  • @mackenziericketts6686
    @mackenziericketts6686 2 роки тому +1

    Hey mate I was under the impression that the charger needed an ignition wire does it not ?

    • @AussieDrifterTouring
      @AussieDrifterTouring  2 роки тому +1

      Hey mate. The ignition wire is only required on variable voltage alternators. The Hilux runs what’s called a temperature compensation alternator so it’s not required. Hope that helps

  • @benjaminlegaspi7120
    @benjaminlegaspi7120 Рік тому

    Hi mate,
    Im the one of your fallower, are you able to do this power installation to my hilux?

    • @AussieDrifterTouring
      @AussieDrifterTouring  Рік тому

      Hi Benjamin, we don't do instals at the moment sorry mate we just make the kits. Perhaps your local mechanic could help with the instal.

  • @1christhomson
    @1christhomson 4 роки тому

    Any chance for a link to the battery you used mate?
    Cheers

  • @brodythompson4057
    @brodythompson4057 3 роки тому

    Do you happen to have the measurements of the tray

    • @AussieDrifterTouring
      @AussieDrifterTouring  3 роки тому

      Here is a link to the detail about the tray mate www.piranhatc.com.au/wp-content/uploads/fitting_guide/BTH15.pdf

  • @nicholasmiller4557
    @nicholasmiller4557 2 роки тому

    Where did you get the tray

    • @nicholasmiller4557
      @nicholasmiller4557 2 роки тому

      And what are the dimensions of the battery

    • @AussieDrifterTouring
      @AussieDrifterTouring  2 роки тому

      @@nicholasmiller4557 Hi mate we use piranha 4x4 trays, and we use the decor hdc27 battery in that setup. Hope that helps

  • @erikregan3474
    @erikregan3474 5 місяців тому

    Watching you drag that battery across your fusses made me nauseous