Q: Turning which way will raise the door? Context: I tried this great idea but when turning the screw to the right (to pull up door) the nut just went up midway up the screw without bringing the door with it. I’m not sure if turning left to loosen will pull up the door. Thanks for this video!
Hi, my bathroom pocket door rubs against the pocket for the door. I had someone replace the door and slide because the other was damaged. How do I keep this from rubbing against the door because it’s damaging the door. Thx
Pocket doors are tricky. 1. The door frames should be 100% level and plumb. 2. The rail should be true and plumb 3. There has to be an adequate gap between the door slab & the split door jamb (1/4”-3/8” to either side) 4. Use the guides on the bottom of the split door jamb for micro adjustments Hope this helps!
I need to keep re adjusting mine every month. I cant seem to lock it permanently to not sag again. Are these brain damaged technology or is it just me?
Great job explaining these issues! Thank you.
Possible to perform this adjustment after molding applied around door?
Not an Allen key, that’s an offset open end wrench.
Thanks for the info. It made the fix so easy.
Hello, I need to adjust my pocket door rollers, so what exactly call the small ranch?
Q: Turning which way will raise the door?
Context: I tried this great idea but when turning the screw to the right (to pull up door) the nut just went up midway up the screw without bringing the door with it. I’m not sure if turning left to loosen will pull up the door.
Thanks for this video!
You may want to consider redoing this video in landscape and mount the camera for less movement.
Thanks for the comment! Will do, stay tuned! :)
Don’t worry about fixing the video, it’s trash anyway.
Hi, my bathroom pocket door rubs against the pocket for the door. I had someone replace the door and slide because the other was damaged. How do I keep this from rubbing against the door because it’s damaging the door.
Thx
Pocket doors are tricky.
1. The door frames should be 100% level and plumb.
2. The rail should be true and plumb
3. There has to be an adequate gap between the door slab & the split door jamb (1/4”-3/8” to either side)
4. Use the guides on the bottom of the split door jamb for micro adjustments
Hope this helps!
Mine has these little dial looking things and i cant figure it out
Thanks I'm having to adjust mine
No problem! Did it work out? Thanks for watching!!
Can’t find open ended offset wrench anywhere.
They are on Amazon! Search pocket door wrench. Good luck!
FOUND IT! Thanks
My favorite part is when you adjust the door
I need to keep re adjusting mine every month. I cant seem to lock it permanently to not sag again. Are these brain damaged technology or is it just me?
Nope my door is not like that moving on
Good luck!
@@DIYfortheaverageguy I did and it's all fixed now.
Alen key ? 🤔
Second!
First
First!