C5 Corvette Hood Vents (How to install hood vents)

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 70

  • @hyperformancellc
    @hyperformancellc 4 роки тому +8

    Had a fun day installing those with you guys. Glad you had a safe trip home. enjoy the billet emblem!

    • @car-nivores
      @car-nivores  4 роки тому +1

      You the man Brent!!! It was a great experience! We should definitely do it again sometime

    • @gopro2027
      @gopro2027 4 роки тому

      @@car-nivores Man they are so much better looking than the frog eyes fixed headlights. I'm always gonna keep the popup headlights but these are killer too. Hey maybe you know if they sell circulat halo rear lights anywhere? I've only seen the ugly oval ones that look like a cheap knockoff of the c6 rear halo lights.

    • @car-nivores
      @car-nivores  4 роки тому +1

      Thank you! They sell the entire back bumper that looks more like a c6 and you can have the circle lights. Also these actually do pop up and down. I just have them up for now.

    • @gopro2027
      @gopro2027 4 роки тому

      @@car-nivores hmm not sure that is something I want to do. Maybe some day ill tinker with the tail lights myself and see if it would be possible to put a ring of LED's inside the OEM housing. Like this one www.vette-lights.com/products/2005-2013-c6-corvette-eagle-eye-led-tail-lights-set

    • @car-nivores
      @car-nivores  4 роки тому

      You would be the first!

  • @bobbyaustin8478
    @bobbyaustin8478 Рік тому +2

    Find a Lumina z34 , they had vents in the hood , removable , and drains to keep water out while letting the air move , check em out .,

  • @keithp115
    @keithp115 4 роки тому +3

    Well done brother and I admire when someone admits they're a little apprehensive about projects!

    • @car-nivores
      @car-nivores  4 роки тому +1

      Thank you! Better safe then sorry!!

    • @alexislobo2010
      @alexislobo2010 3 роки тому

      I agree some installs are irreversible once you get to a certain steps. If you mess up and try to correct it you might end up making it worse.

  • @eyhabhamid5163
    @eyhabhamid5163 4 роки тому +1

    She just keeps getting cleaner and cleaner man 😍😍😍

  • @tdalb8985
    @tdalb8985 4 роки тому +1

    Dude, you did the fenders.
    You had this.

    • @car-nivores
      @car-nivores  4 роки тому

      I appreciate that but I also don't have the tools lmao. I was also cautious cause a friend of mine wanted to put holes in his car far mods recently and it did not go well...

  • @itsmecheychey
    @itsmecheychey 4 роки тому

    Great video! Loved it. I want to see more of this

  • @stanmendoza7871
    @stanmendoza7871 3 роки тому

    Nice ride.....I miss my C5 Z06....BTW nice clean job on the hood vents, I'm thinking about installing hood vents on my 69 Nova surfing
    youtube now...take care man!

    • @car-nivores
      @car-nivores  3 роки тому

      Thank you!!! And hood vents are fantastic! I hope you find the right ones for the nova

  • @kmack282
    @kmack282 7 місяців тому

    I'm glad you no longer need hood structure. Must of been an option at the dealer huh

  • @bouldernelsonbigfoot
    @bouldernelsonbigfoot 3 роки тому

    i like the ay u left hood attached. no need to remove.

  • @BZRGarage
    @BZRGarage 4 роки тому

    Awesome Video! Just subbed, I do some corvette vids as well but on the older stuff.

    • @car-nivores
      @car-nivores  4 роки тому +1

      Hell yeah thanks man! I'll check it out

  • @troy8940
    @troy8940 4 роки тому

    Each week new Effects I Very Nice ! 😎

    • @car-nivores
      @car-nivores  4 роки тому

      Don't get used to it lmao this just kinda happened.

  • @juiceyyy9842
    @juiceyyy9842 4 роки тому +2

    Ayo bruh a front splitter would complete the look👌

    • @car-nivores
      @car-nivores  4 роки тому +2

      🙄 tell me about it. I ordered it a month ago lol

  • @mostheinous
    @mostheinous 3 роки тому

    How does the water flow , is there a way to keep the engine dry ?

    • @mostheinous
      @mostheinous 3 роки тому

      sorry probably should have read down below .

  • @kurbel36
    @kurbel36 4 роки тому

    Looking good!!!!!

  • @mostheinous
    @mostheinous 3 роки тому

    Your rear fenders to instal them do you have to take off the roof

    • @car-nivores
      @car-nivores  3 роки тому +1

      I have a video of the installation process. I did not have to remove roof. I dont think you have to on frc cars either

    • @mostheinous
      @mostheinous 3 роки тому

      Can u send a link to video I keep getting a town when I look for your video I want to change my rear fenders im currently changing my front bumper cover to a c6 bumper the c5 looks like cinderella's shoe really ugly mines black with flames looks like a hot wheel car next I think I my change the hood to carbon fiber the flames on hood im getting tired of any way thanks from California

  • @NITE_SHIFTING
    @NITE_SHIFTING 4 роки тому

    Looks good. 👍

    • @car-nivores
      @car-nivores  4 роки тому

      Thank you!

    • @NITE_SHIFTING
      @NITE_SHIFTING 4 роки тому

      @@car-nivores new sub. I have a black on black '97 C5 getting ready to install the smoked directionals. Love the content.

    • @car-nivores
      @car-nivores  4 роки тому +1

      Sounds sexy! Thank you!

  • @johnschmidt5330
    @johnschmidt5330 3 роки тому

    Have you noticed a difference in engine temperature with the additional ventilation in the engine compartment?

    • @car-nivores
      @car-nivores  3 роки тому

      Unfortunately I never payed attention to my Temps before the installation, but if it means anything, the car is usually sitting around 190 to 200 while driving. You can visually see the heat. Thats not really what hood vents are for on these car. Its more of a performance mod. Less nose lift on acceleration and at high speeds. Its very noticeable

  • @villyrivera6856
    @villyrivera6856 4 роки тому

    Does it concern u water could get into the engine bay ?

  • @leanguns
    @leanguns Рік тому

    Is this a c6 rear bumper on a c5

    • @car-nivores
      @car-nivores  Рік тому

      Negative. It's a kbd bumper I got from corvette creations

  • @dtaylor224
    @dtaylor224 9 місяців тому

    How much does something like this cost?

    • @car-nivores
      @car-nivores  9 місяців тому

      The product or the installation? The product links are in the description but the install I have no idea

  • @therajuncajun6487
    @therajuncajun6487 4 роки тому

    I like it!

  • @alexislobo2010
    @alexislobo2010 3 роки тому

    I'd pull the trigger real quick if they were carbon fiber. Clean whip man. 👍

    • @car-nivores
      @car-nivores  3 роки тому +1

      I pitch the idea!

    • @alexislobo2010
      @alexislobo2010 3 роки тому

      @@car-nivores Dope. I'll wait for the video if it does go through.

    • @car-nivores
      @car-nivores  3 роки тому

      You would have to custom order it.

  • @mostheinous
    @mostheinous 3 роки тому

    Corvette innovention has collected alot of money but I still haven't received sleepy eyes and hood vents same as yours pls help

    • @car-nivores
      @car-nivores  2 роки тому +1

      I'm not associated with them but ill pass this message along where I can

    • @mostheinous
      @mostheinous 2 роки тому

      Don't worry they got ahold long time and alot of complaints about them on there web site and how they collect money with out sending packages enjoy your corvette it would only aggravate them I can wait thanks 4 tge response stay healthy

    • @car-nivores
      @car-nivores  2 роки тому

      Yeah I dont agree with that and it honestly pisses me off that that's happening

    • @mostheinous
      @mostheinous 2 роки тому

      @@car-nivores do they come though and actually send there products it starting 2 sound like I lost 1,200 $ ill wait and play nice thx

    • @car-nivores
      @car-nivores  2 роки тому +1

      I would hope so.

  • @richknudsen5781
    @richknudsen5781 4 роки тому

    I'm doing a similar set of vents on my 99 track car with a set of vents I got on Ebay. Mine will mount on the riser part of the hood. Those look great.

    • @car-nivores
      @car-nivores  4 роки тому

      Thank you! These can mount there too! I actually want to see someone do it. It would be sick!

  • @williamcollins1376
    @williamcollins1376 4 роки тому

    Can these be installed on any hood?

  • @jeffgrusky1115
    @jeffgrusky1115 4 роки тому

    What are those headlights?

    • @car-nivores
      @car-nivores  4 роки тому

      Corvette innovationz sleepy eye leds. I have a older video of me installing them.

  • @link9alink9a71
    @link9alink9a71 4 роки тому

    What about the water ???

    • @car-nivores
      @car-nivores  4 роки тому

      What's up? What about water?

    • @link9alink9a71
      @link9alink9a71 4 роки тому

      @@car-nivores the water doesn't go through the vents to the engine ? And what the point to put that it's because the heat ?

    • @car-nivores
      @car-nivores  4 роки тому

      A little water gets in but nothing serious. Everything under the hood is built to resist water. Just not floods. Yes it's for heat and aerodynamics. It allows the air to escape from under the hood and keep the nose of the car from lifting at speed

    • @link9alink9a71
      @link9alink9a71 4 роки тому

      @@car-nivores thanks

    • @car-nivores
      @car-nivores  4 роки тому

      No problem man