C5 WIDE BODY FENDERS!!!!
Вставка
- Опубліковано 24 вер 2019
- My Corvette Life: Episode 238 - C5 WIDE BODY FENDERS!!!!
Corvette Creationz
corvettecreationz.com/
NEW MERCH NOW AVAILABLE!
teespring.com/stores/mcl-merch
Contact Me Via Email:
mycorvettelife.yt@gmail.com
Here are my socials:
Facebook: / mycorvettelife
Instagram: / my_corvette_life
Car tuned by Arizona Elite Motorsports
422 RWHP, 381 FT-LBS
1998 C5 Corvette Coupe - Modifications List
Corbeau A4 Seats
Thunder Racing T-Rex Cam TR224: 224/224 563/563 114LSA
Kooks 1-3/4" x 3" Long Tube Headers
Kooks Catted 3" X-Pipe
Corsa Indy Pace Car (Corsa Sport) axle-back exhaust
Casting 799 - LS6/LS2 Cylinder Heads
BTR .660" Lift Dual Valve Springs
7.375" Pushrods
LS6 Intake Manifold
Vararam Lower Ram Air Intake
Vararam Power Duct (Air Bridge)
Mike Norris Motorsports - Billet PCV Oil Catch Can
C6 Z06 Shocks
C6 Z51 Sway Bars
BrakeMotive Drilled/Slotted Brake Rotors
C5 Z06 Mesh Intake Grills
C6 Z06 Shifter
C6 Z06 Wheels
Corvette Envy LED Halo Tail Lights
Corvette Envy ACA Projector Headlight Housings
Clear DRL Housings
Vette LEDs DRL Switchbacks (Use code "MCL5 for 5% off)
Vette LEDs Reverse Lights (Use code "MCL5 for 5% off)
Vette LEDs Cabin Lights (Use code "MCL5 for 5% off)
Tires: Bridgestone (Front) 275/35/18, (Rear) 325/30/19
C5 Stainless Steel Dash Trim Kit by American Car Craft - Авто та транспорт
Hey Chris, I've noticed since watching your vids, that all your aftermarket improvements are tastefully done and give encouragement to C5 owners to make their own decisions on doing the same. So, on behalf of all your subscribers, we say thank you for doing what you do.
This^
Thank you sir! That is what I strive for.
Well said Tony!
I second that👍
Absolutely this!! So many Vettes are so tacky looking but Chris has so clean and good looking car!!
Very cool how the panels are removed by just removing a handful of screws. No cutting glass tabs, or anything like that. Will look sweet once it's all painted. Another great video Bud.
I knew in 97 the C5 was an instant classic. Strong work on keeping yours looking all-day fresh.
Damn that was easier than I thought.
I didn't even know there were wide body quarters available. Nice video. Also didn't know they just bolt on.
Awesome Fenders, and i see the lift comes in very handy, and i do the same when working on my C5, i see a dirty area like that, just gotta clean it!!!
I'd lock tite and torque those spacers. I had some come loose on me once.
So glad you kept the pop ups I hate when other C5 owners delete them because it’s what makes it a C5
I'm anxiously sitting here waiting on the word to go pick up my wide bodied c5 I can wait I barely slept last night lol
Once again you make it look easy. Those fenders look very nice! Awesome when they are painted.
Thanks for making these videos. Very helpful as I'm doing stuff to my z06. Thanks man.
Nice! Can’t wait to see it after paint.
Looks awesome my friend. Can’t wait to see it painted. Great video.
AWESOME! Might have to do this on mine!
Love the smooth flare and marker delete. Hell yeah!
Thanks!!! no you make it much easier for me when I gonna installed mine wide body fenders😃😃😃
This looks great!!! This is an upgrade I’ve wanted to do for years. The body shop talked me out of it saying that after market fenders would never fit the same. Damn! Can’t wait to see it painted.
Mello noticed a little extra gap where it meets the rocker panel.
Extremely tasteful car..
Keep it up!
Nice! Can't wait to do mine
Great job!👍 It looks like a
Grand Sport now! 😎
I wish that I could find finders for my C4 Corvette rear quarters.
Nice little add-on buddy! Keep the vids coming,I have been with you from the day you bought it and its come a long way since then.
OK, great job responding to everyone. So you will have panels removed to paint, deleted side markers, and spacers until the new wheels are in the budget. Can't wait to see your wheel choice and wider meats on the back. Great video as always.
Fenders look great Chris!!! Your car is looking better and better with each mod.
Nice mod! Thanks for sharing!!!
Awesome. Would love to be able to do this with my C6 but that's not anytime soon. Enjoy the new look.
beautiful & clean
Congrats! Looks great!
These look so good Chris!!! 🔥🔥 Can’t believe I’m just now seeing this video, swear I’ve seen all yours until now. Glad I saw it, now where’s my computer and debit card?!😝
Great fit for an aftermarket part.
Okay, I definitely approve! I was always on the fence with wide body fenders because so many look tacked on, but these look good. +1 to my C5's mods list....
Beauty is in the eye of the beholder. Looks great.
Damn.you have a NICE garage chris
🙏🏻
Congrats on words fenders bro! Awesome video keep it up
Looks awesome one of my favorite cars C5
Dang I can't wait for my carbon fenders! Been waiting patiently since April lol. Glad things are finally starting to move on a positive direction!
Did you have any issues with your carbon fiber fenders. I just recieved mine today. I'm hoping that I dont run into any hiccups.
Matthew Blanchett how was the fitment?
Good luck at the car show!
Thanks for the video you answered a question that been on my mind for a while sweet vette
Only get your wide fenders from corvette creations. The other sellers are known to take the money and not deliver for months if at all.
puts some on mine a few years back 2"wider went with a 2' spacer also lowered it looks sweet
Looks great!!
Definitely need the paint shop to install side marker lights. They should at least include a template for the side marker lights.
Nice installation of the new panels... Those 7 mm bolts are like rabbits...they’re everywhere...🤔😅🤣😂🤭😳🙄
Nope, deleting the side markers.
Now I want to add Wide body Fenders to my car!
Great video thanks👍
Looks good!
Hi Chris, you might think about buying an electric ratchet. It would definitely speed up your disassembly and reassembly process! I bought mine on Amazon and it really helps!
Clever intro!
Man those almost look really good. If it didn't have that huge gap on the bottom front. That's a deal breaker for me.
Hey whatsup..Chris. love the new look. Its amazing how modern the C5 Corvette looks. I think if you lived in the UK your vette would look alot worse with our rainy climate, so to be honest i think your car isn't that dirty after 20 years. Regards from England.
True true!
I'm thinking about but some for my FRC but I heard it's some modifications you need to do to make them fit.
This thing looks DOPE.
Awesome
Nice
Enjoyable video! Like to see what ideas you can give me for my 2000 C5! Non Vette related.... what did you use on your garage floor?? It looks amazing!
What about the side marker lights ? I noticed there was no cut out for them in the new quarters.
I don’t know if you mentioned it on your other videos where did you get those spacers ?
Corvette Mods
..when the new , wider quarters are installed there seems to be a gap between the original wheel well liner and the flared portion of the new quarter that isn't cover up..is there a fix for this?..do the manufacturers make a filler strip?
Finally got a set of these!!
Congrats!
My Corvette Life Thanks! Prep and paint soon. How they holding up?
Mine are still doing well.
No side markers??? Here in Kalifornia they would cite you in a heartbeat.
Nope. AZ doesn’t care.
I knew they were coming a while back lol rear defuser coming ?? Looks good
No diffuser.
I have a 98 C5 and had a Carbon Fiber Defuser install. It’s a custom job! It looks great, but a lot of work.
Needs lowered by about 2 inches. It's all about stance. That wide body looks great the lower it goes 🤙
100% right!
Where did you get them from looks to be of good quality also where do you get the spacers I’ve been wanting to do this to my 04 Z06
Good video Chris. Just ordered the TPE’s from CC. How was the pre-fitment prior to paint? Any issues? Thanks!
So do the marker lights in the quarter panel just not get used? Or do they offer the fenders with those holes in them?
Either way.
what about the marker lights, there was no cutout for them in the new fenders
Nice mod!
That gas cap paint protector is nice. Where did you find that
Came with the car.
clean C5 sir
Thank you.
If that cleaner has silicone keep it away from a paint shop. Remove and detergent clean any contamination from those quarters. Also fenders are on the front, quarter panels are always rear so no need to say rear quarter. Jus’ sayin’.
Great look on this one , its just a bolt on ?No need to fit it?Could been nice with a link wher you buy them
Does the stock fender liner work with these new flared fenders? Thanks for the video. Keep up the good work.
There is a small gap between the fender liner and the fender. You can’t see it with the tire on. There is one guy on Corvette Forum that makes liber extensions. I may hit him up.
25mm spacer? Also, what kind of lift & side skirts? Thank You.
Chris where did you buy your fenders? I just got mine in and they didn't have the predrilled holes and they don't fix as well as your do.
Corvette Creationz
I was hoping you would do this mod.
Hey Chris I've watched a lot of your videos and learned a lot you give great information do you know anything about changing the door skin on a c5 any info would be appreciated
I noticed that the lower part of your rear bumper is a gloss black, mine is a matte black and I prefer yours, did it come like that when you bought it?
I love the car and really like your video editing. Great job on everything. Would have been great for company to include side marker light cutouts. We’re they expensive ? Dam nice clean garage for sure.
I chose to delete the side markers, that’s why they didn’t come with them cutout.
You should have paint them before installation that way you did not have to leave your car at the shop.After all the car will look great once are painted.I just hope with all the improvements you have made to the vette will be a keeper for quite sometime.
The car has the go to the shop regardless so they can ensure proper fitment and panel gap. Also to ensure paint match with the rest of the car. It will be done right.
So you have to delete the corner lamp on the wide body fender. what did you do with the light fixture?
It was an option. I just tied the wire up behind the fender.
Did yesterday do the c6 splash guards on the c5?
Chris, what is the spacer thickness for those front and rear c6 z06 wheels?
With the stock fenders I didn’t use any spacers front or rear. With the wide rear fenders I’m using 1” spacers on the rear until I get new wheels.
what size spacers are you running?
Do you have a link for the spacers used with your widebody kit?
Chris, great video, as usual! The panels look awesome. I noticed they deleted the sidemarkers too, which looks way better. I'm curious, what size tire do you have in the rear? What size are you able to fit now that you've installed the quarter panels?
I currently have a 325. I could go as big as 345.
@@mycorvettelife Wow, so you were able to fit 325's with the stock quarter panels? What rims are you using? I need to get a thicker tire on mine. As it stands, first gear is useless, lol.
Yes, I’m using OEM C6 Z06 wheels.
I am betting the customer has a choice on the side markers if he wants them or not ( I actually would of thought being from California that it would be a law to have side markers on all cars in the states)
Can’t find these TPE style ones on their website only for z06/vert are they not making them for coupes anymore?
They do. Call them. It will be a long lead time.
He didn’t torque the spacer lugs. Make sure you torque them then retorque after 50 miles or you can have catastrophic failure.
Those look great! If you don’t mind me asking, how much do you pay to get those painted? I sometimes think of changing a couple body panels but it seems ridiculous to pay as much as the car is worth to get it painted
$400 per panel for paint.
were you able to find a wide body fender liner for your car?
No
Hi Chris. Great car 💪 I have a question. Is there any gap between wide fender and wheel arch?
Yes. I have not done anything about it and it’s been fine. You can’t see it unless you stick your head in there. There is one guy on Corvette Forum that makes an extension piece to fill the gap.
Nice video! Who makes that car jack that you are using?
QuickJack
How many inches was the spacer with your z06 wheels ?
1”
Is there an option to purchase with the marker delete from corvettecreationz?
They come with the marker deleted since most people were requesting it that way. But it would be easy to cut in if someone still wanted it.
Waited long time for this video,
No side markers on new fenders? Or you gonna cut into it?
nowotarzan good point. Didn’t notice that.
Deleting the side markers.
How was the fitment? Are all the holes pre drilled?
Fitment was so so. The body shop got them to fit better than I could. All hole were pre-drilled.
U do tasteful upgrades. Can u order them painted to match? Thanks, keep up the great videos!
No, they come bare only.
Hey buddy, custom job you’re Vette looks Great! Which company did you use?
Corvette Creationz TPE style
How was the fitment? any issues at all? really considering buying some for my C5Z. Let me know thanks
Fitment was pretty good, even with no prep.
I like the clean lines without the marker lights. Will you have the body shop cut the necessary opening to reinstall them? Most everyone seems to do just the rear quarters, what about installing matching wide-body front quarters? Save the Wave.
No, deleting the side markers.
I may do the front fenders later. They aren’t as noticeable as the rear.
Chris, you corvette is coming along really nicely, my question to you is, do you really trust having wheel spacers on your car?
Yes, although I have since gotten new wheels and don’t use spacers.
I was going to buy s c6 because the reareand looks better...but the c5 is better because you can fix them up and make them better.
So the wide body panel didn't come w/ those side marker lights. Did u just zip tie and not put bulbs in ????
I purposely asked for them to be deleted. I tied the wires up.