That looks so much better! Not 100% sure on the centre caps, they look a bit ford-ish to me. Could you not adjust the camber on the rear slightly? Great work though, it really does look loads better.
Sweet ride bro I remember you had the iron block rs3, I'm glad to see you upgraded I ended up going with bc forges with mine i thought it compliments the chrome
Looks great! I wasn’t quite sure at first, but the chunkier tires certainly give the car an aggressive look! Too bad you can’t get Michelin’s in that size in the UK.
My RS3 sedan was scrubbing in the rear after lowering on coilovers with my Vossens. I didn’t want to lift it up higher. Just the slightest bit of negative camber got me out of trouble 👌🏻 worth a shot if you don’t have too much poke in the rear
I wasn't sure until you put them on, now I'm liking them. They're a perfect fit, having more profile will be better suited for our trashed UK roads which are twinned with Baghdad 😂
When you get alignment, make sure you get the adas re calibrated, when you do the alignment and adjust, the adas will be off and lane assist ect wont be accurate
you need to add a few degrees of camber on the rear to clear the qtrs. had the same prob w mine added a few deg and cleared, still within factory specs.
Before start watching please guys Hamza does a really great videos so we have to support him more and more , and he is fulfilling and realise what car lovers want
Hello there, i left a comment on your dyno video about your exhaust do have a look at then cause I’m just worried your mounts may be a bit loose or maybe that’s normal?
Don't think 19's would fit that width without stupidly low profile tyres, great for the track and useless on the road. 18's with a bit of profile are the better choice on the road.
I can’t help but think the same as EvilGT’s RS3 when I saw that…the standard wheels look sooo much better on the car…Love a lowered car but how annoying it is when it rubs…makes my arse twitch 😂😂
Copper grease is such a poor practice.. You are effectively adding a shim between the wheel and the hub/mounting face by doing that. The correct practice was demonstrated by use of the wire brush.
Will be going for coilovers soon when the ones I want are back in stock, wanted to do springs in meantime so the car doesn’t look too high with the new wheels on it
To much poke and sorry to be negative but they look rank should of gone with rse102s. Each to their own I suppose. On the plus I love your content, think you need to add a classic bud to your collection 👍🏻
Look out for the Santa Pod video in a few days!
You need to review test drive the new Hyundai I20 N on your channel. It is getting quite boring looking at German cars all the time.
Ready for a new video!!! Let’s see some GTI content!!!
Love it but would really love to see a chrome delete especially the window surrounds.
the chrome goes hard with the black more tbh. more classy
@@DanielAtHome1 Don’t mind the chrome grill but the window surround on a black car with black wheels just doesn’t look right.
Agree needs a dechrome sesh
yessss dechromeeeeeeeeeeeeee
I got these bc forges to compliment to chrome
Loved the black and chrome combo. Think this car would look perfect on chrome wheels
I did consider the silver/chrome option, but last minute played it safe and got black 😂
I was skeptical of the wheel choice at first but with them on the car and lowered, it looks mega. Never doubt Hamza.
Looks unreal bro 👊🏼 glad those blue tips are long gone 🤣
It looks beautiful brother, exactly what it needed👌🏾
Finally !!! Exactly what I’ve been waiting for, suspension mods on the RS3 😍
That’s looks sick bro, and sounds amazing. Nice work!
so clean. I love it! keep up the great work! subbed.
Love them. Looks much nicer than the old style!
🤩looks Awesome. Light Wheels and Suspension Make such a difference
That looks so much better! Not 100% sure on the centre caps, they look a bit ford-ish to me. Could you not adjust the camber on the rear slightly? Great work though, it really does look loads better.
Gonna set the car up properly when I get camber plates for the front and some other suspension bits 👌🏼
Actually reminds of a modern day b7 RS4.
Sweet ride bro
I remember you had the iron block rs3, I'm glad to see you upgraded
I ended up going with bc forges with mine i thought it compliments the chrome
that sits really nice and the wheels look spot on 👍 😀
I was waiting patiently. Lots of surport from South Africa
Look so much better with the new wheels!
Looks great! I wasn’t quite sure at first, but the chunkier tires certainly give the car an aggressive look! Too bad you can’t get Michelin’s in that size in the UK.
My RS3 sedan was scrubbing in the rear after lowering on coilovers with my Vossens. I didn’t want to lift it up higher. Just the slightest bit of negative camber got me out of trouble 👌🏻 worth a shot if you don’t have too much poke in the rear
Another awesome video mate so precise wheels looks amazing
A short video but a cool one . much love from South Africa my brother
Thank you brother
This looks SO much better now Hamza. Nice one 🔥
So chunky, that fitment is perfect as well! Looks wicked blacked out with more aggressive alloys!
I literally just seen you in marsh road Mcds, I didn’t clock it was you until I saw the reg in this vid🤣🤣🤣
Have the arches rolled 🤔
On another note. We need to start sharing TR Hamza's content more. No other UA-camr is this down to earth.
Thank you 🙏🏼
@@TRHamza You're welcome 👍
Edit* Thanks for all the graft you put in to the videos. Doesn't go unnoticed.
I wasn't sure until you put them on, now I'm liking them. They're a perfect fit, having more profile will be better suited for our trashed UK roads which are twinned with Baghdad 😂
Yeah our roads are terrible, definitely prefer 18s 😂
When you get alignment, make sure you get the adas re calibrated, when you do the alignment and adjust, the adas will be off and lane assist ect wont be accurate
Yes hamza, can’t wait to watch. 🔥
you need to add a few degrees of camber on the rear to clear the qtrs. had the same prob w mine added a few deg and cleared, still within factory specs.
Thought i was the only one who loves that chunky look on my tires… Looks great!
Fit is great! Love these videos, but upset i dont have one lol. Dream car right now! 👍🏻
Before start watching please guys Hamza does a really great videos so we have to support him more and more , and he is fulfilling and realise what car lovers want
The RS3 looks great on the new rims and tyres, where did you get the centre caps they look great too👍
I love chunky tyres, savage man
Nice one bro!
turned out really nice this
Great vid bro, love to see what’s next.
…and is that the m140i carrying the wheels in the boot? Didn’t u sell it?
Those wheels look mint 👍🏻
What exhaust set up are you running sounds glorious!!
Purposeful Stance 😁💯
Looks great!
Tyzres/wheels look ca 5mm too wide per side!
Can you maybe increase the negative camber a bit more ?!
Looks awesome that
Rs3 looks way more aggressive bro 🔥
Yessss! Here we go 👊👊
Given that mine is still without a build date, I’m always grateful of your RS3 content!
Wheels need to go silver to go with the rest of the trims or a chrome delete to go with the black wheels, other than that, looks spot on
Looking sweeeeeet
Get the chrome gone bro 👌
What do you use on the black to stop swirl and smear marks after cleaning it ?
Hello there, i left a comment on your dyno video about your exhaust do have a look at then cause I’m just worried your mounts may be a bit loose or maybe that’s normal?
Mate my s3 is having over advanced chain problems, does that mean I have to replace my chains?
Savage car! Could do with a de-chrome though! 👌🏼
Perfect man! We'll done!
Love your ride bro.
Audi used to supply that little tool for lining up the wheel in the tool kit
hey, who did you buy these from and whats was the price ?
Not that big of a fan of black rims on a black car but the stance looks menacing 😈
transformed!!!👍🏻
What video editing software do you use? Thanks
where do get that stud to line up the wheel and whats it called
Now it's lowered it looks epic
That is sitting so well that’s what happens when you do your homework 🤛🤣
Who did you import the wheels through?
Top notch stuff
looks mint
Look good now!
The black wheels thing does my head in it just puts years on a car
looks like that the wheels have never been washed.. i hate black rims
Why did you go for 18 inch and not 19 inch it looks really good
Don't think 19's would fit that width without stupidly low profile tyres, great for the track and useless on the road. 18's with a bit of profile are the better choice on the road.
Why don’t you roll the rear arches?
See you got rid of those plastic mud deflectors in the end 👌🏼
Lovely combo, a tad wide but cool
Are you going to do a chrome delete?
Yes hamza
looking good
I can’t help but think the same as EvilGT’s RS3 when I saw that…the standard wheels look sooo much better on the car…Love a lowered car but how annoying it is when it rubs…makes my arse twitch 😂😂
Didn't you sell the m140?
Liking them rims, a lot 👍
Looks good on the, rims. Don’t like the centre caps though
Nice wheels. I definitely think they’re poking out a fraction too much at the rear though.
Inner ware common then? My pfl front are the same 🤦🏽♂️
5:13 why your RS3 is doing this?
Looking naughty looks more aggressive with them rims them audi rims are s🤬te bud 🔥🔥🔥🔥🔥🔥
Bro I really wanna know how you get over speed bumps in brum
It’s a struggle at times, just avoid the really bad roads 😂
Offset on rear rims is too small, could see tyres were going to rub the arches.
Perfect, I love this set up so much more that a 19/20 inch wheel with stretched tires. Looks awesome mate👌🔥
Anyone know what that rear plastic tab thing is? My Cupra is going back soon and mines missing on one side ☹️
If you mean the plastic trim on the arch it’s to stop stone and chippings and mud from flicking up and hitting the bodywork
Nardo grey wrap bro🙏🏾
Catless down pipe ?
We need some front splitter content
Nice but where is the R32????????
That RS badge on the wheels looks like a focus RS logo...
Love the content as always bro but 3 words man. Copper grease please, it’s paying it forward for yourself or the next man 😂
Copper grease is such a poor practice.. You are effectively adding a shim between the wheel and the hub/mounting face by doing that. The correct practice was demonstrated by use of the wire brush.
Why don’t you go directly for a proper coilover and took just these (very pricey) springs ?
Is you car adaptive and you wanted to keep it ?!
Will be going for coilovers soon when the ones I want are back in stock, wanted to do springs in meantime so the car doesn’t look too high with the new wheels on it
🔥
To much poke and sorry to be negative but they look rank should of gone with rse102s. Each to their own I suppose. On the plus I love your content, think you need to add a classic bud to your collection 👍🏻
Thought m140 was sold ,?
It is, this was filmed before 👍🏼
Top content as always bro. This isn’t helping with my need for an RS3
Thank you bro
Looks like a gta style car 😂
I would have gone for ET45, but looks good Hamza!
What's the difference between the et45 and the ET40?
Et45 will poke out 5mm less than et40, and this will more than likely stop it from rubbing.
@@connor5147 really? My understanding was that 45 would make the wheels stick out even further?
@@csllover the lower the offset (et) the more the wheels will stick out.
@@connor5147 thanks mate
Get them done in silver
Probably should have tapered bolts on and not standard radius bolts