I was stuck @14:47 FOREVER! until I realized that I needed to double click the sketch profiles in order to select them. Deleted and restarted the 3d sketches looking for possible errors before I realized what was happening.
how do you get your solid works to make colors and objects so realistic? I have maximized my settings in options, but my objects don't look anything like they're made with real materials.
Thanks for uploading this. Has anyone had an issue with the lofted cut at 14:20, specifically with the points on sketches 6 & 7 at 13:20 & 13:42? When I attempt the lofted cut, I receive this error message: "sketch 6 (or sketch 7) has no contour geometry". I have redrawn all curves and points, but I keep getting the same error. Any help would be appreciated. Thanks in advance and for uploading this tutorial!
This is great! your really good! just one question, when you made the dips for the juicer structure why did you add the 15x20 square? what benefit did it have? thanks!
It could have been nice with the good video to reply to questions being asked over here! for instance, I would like to know how do you decide / know what are the right measures and the correct angle? Thank you.
When you have ideas or are trying to replicate something that doesn't have measurements, usually you can make your own. Its what I do when modeling something lacking proper dimensions. Its trial and error. In the workplace dimensions will be given
thank you , please ... why the centerline used in sketch 3 ???? and why used 2 coincident with line8scetch3 & line9@scetch3 together with (3D sketch 2) and same with (3Dscetch3) one coincident not enough ?? thanks a lot
The drawing is missing, you finish off with emptying the materials from the juicer, since in all the juicers, the center is empty so you add the bottom part effectively and to save materials
I am trying to replicate the process in Inventor, does anyone know how to align points from the 3d sketch with the points from the 2d sketch as in 5:38?
Does anyone know how to hollow the cone apart from using combine? I tried splitting in two bodies and then shell with down to 0.5mm thickness and could not get it to work. This video is amazing.
Hi, can you give me the settings in which the part modelling is done? I want to get the environment reflected to the part and look good as you have, much appreciated.
when i try to dimention my spline like 11:00 i get a warning "Please Select a planar face" and it doesn't let me dimention it; can someone help me with this?
Cannot loft cut completely with one operation. Get error message "has no contour geometry". I have to do it separately. (loft cut twice) One for upper part and one for lower part of the profile. Anyone knows why?
Es recomendable que la persona que realiza los videos hable o ponga música de fondo, muchas veces sus instrucciones no son claras, mueve mucho el cursor y confunde a quien esta viendo su tutorial.
there are like dozens of core I7, one of them is great, most are trash. SSD and more ram would help, a decent graphics card to to alleviate the video processing from the cpu
This is perfect. It introduces advanced concepts using a basic item.
I have always known you to be so exact and neat with all your work. Always knew you would just get better . Your excellent at what you do.
Thank you so much for the help! I designed it in Solidworks and 3D printed in Cura as well!
I was waiting for you to shell the center out, but great tutorial!
Yeah, me too...
Um excelente vídeo!!!🎊🎊🎊 Parabéns... ótima apresentação e ensinamento - hehe.♥♥♥
Nice product modeling CAD demo. Thanks.
What are you doing with the two splines at 11:44 seconds? Are you setting them equal? Tangent?
cherry on the top would be use flex to add a mild twist to the juicer section/.
Très bien fait, la partie complexe est super bien réalisé !! merci pour ce partage
I was stuck @14:47 FOREVER! until I realized that I needed to double click the sketch profiles in order to select them. Deleted and restarted the 3d sketches looking for possible errors before I realized what was happening.
Learning a lot with you guys! Keep the good work! Thanks!
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ua-cam.com/video/l45lRQ2wIF8/v-deo.html
Thats great one, loved it. lot of like
how do you get your solid works to make colors and objects so realistic? I have maximized my settings in options, but my objects don't look anything like they're made with real materials.
thank you man your inspiration and I hope it is helping people over the world .
be bressed
How do you make the objects this shiny? My constructions seem sort of bland, is it a version of Solidworks or a specific option?
Graphic card with support Open GL
@@RonAdamsky thank you, my man, fortunately I've been able to enable it in my SolidWorks, thanks for the help, though
Thanks for uploading this.
Has anyone had an issue with the lofted cut at 14:20, specifically with the points on sketches 6 & 7 at 13:20 & 13:42? When I attempt the lofted cut, I receive this error message: "sketch 6 (or sketch 7) has no contour geometry". I have redrawn all curves and points, but I keep getting the same error.
Any help would be appreciated.
Thanks in advance and for uploading this tutorial!
You are selecting the sketches in the wrong order
Please check my Solid works Tutorial Videos
ua-cam.com/channels/IozxXWfBmKWo_C1dbGiwGw.html?view_as=subscriber
This is great! your really good! just one question, when you made the dips for the juicer structure why did you add the 15x20 square? what benefit did it have? thanks!
I assume to allign the cuts for the surface?
It could have been nice with the good video to reply to questions being asked over here!
for instance, I would like to know how do you decide / know what are the right measures and the correct angle?
Thank you.
When you have ideas or are trying to replicate something that doesn't have measurements, usually you can make your own. Its what I do when modeling something lacking proper dimensions. Its trial and error. In the workplace dimensions will be given
this video was very helpful 👌😊 next just think and make other design 🤗
very good
thank you ,
please ...
why the centerline used in sketch 3 ????
and why used 2 coincident with line8scetch3 & line9@scetch3 together with (3D sketch 2) and same with (3Dscetch3)
one coincident not enough ??
thanks a lot
The drawing is missing, you finish off with emptying the materials from the juicer, since in all the juicers, the center is empty so you add the bottom part effectively and to save materials
I loved it!
I can not put the pieces in that brightness. What should I do?
I wonder if it is possible to go from the model to guessing the features applied to get the same geometry.
best regards from Berlin
wasn't you able to mirror that line at 11:21 ?
Plese give me mobile number
Love it .. good teachig n work. How do you get the hdri material shader ?
Dear how to download solid edge ?
I am trying to replicate the process in Inventor, does anyone know how to align points from the 3d sketch with the points from the 2d sketch as in 5:38?
hi, did you manage to do shapes in the middle?? please message me, if you did.THANKS
@@tonda215654 no not yet... I will be looking at this again after Christmas though! I will come back to you if I find out
Nice video, can you tell me how did you learn SOLIDWORKS so well ?
Does anyone know how to hollow the cone apart from using combine? I tried splitting in two bodies and then shell with down to 0.5mm thickness and could not get it to work. This video is amazing.
please show how to add colour to the product ! i could'nt follow your process ! even after several times !
THNX FOR LOFT CUT UNDESTANDING
Hi, can you give me the settings in which the part modelling is done? I want to get the environment reflected to the part and look good as you have, much appreciated.
You have to use RealView
To use this option you must have a "Pro" graphics card
I want to know what course u did to be able to do all things. Pls help. Thank u.
hii, thanks for the video, i'd like to know what software you use to record the screen.
when i try to dimention my spline like 11:00 i get a warning "Please Select a planar face" and it doesn't let me dimention it; can someone help me with this?
pull the dimension out of the sketch in the white background
Nice hat 😁
wonder if it can be modelled in autocad. Try it and post the link
How can we use lofted cut in Siemens nx 11
Coucou. Le gros like de soutien posé. Bonne journée à toi.
Bravo. Thank you.
When you hover over an item in the feature manager appear blue arrows. How it is implemented?
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ua-cam.com/video/l45lRQ2wIF8/v-deo.html
Cannot loft cut completely with one operation. Get error message "has no contour geometry". I have to do it separately. (loft cut twice) One for upper part and one for lower part of the profile. Anyone knows why?
no sorry
I want the download SolidWorks but I can't
Fácil y rápido, muy clara la forma como explicas :)
i can't search on SolidWorks!!?
it can be done in a much simpler way
17:52 i see what u did there
hahaha we all see it
@@dianaazeneth I did not at first
I like render version. for my products, i need photoview 360 right ?
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ua-cam.com/video/l45lRQ2wIF8/v-deo.html
Mantappppp👌👍
This tutorial will be so much great if you add Music (free license).
Very poor choice for the final render view 😂 other than that, pretty good job.
Thank you for shiring is good
Es recomendable que la persona que realiza los videos hable o ponga música de fondo, muchas veces sus instrucciones no son claras, mueve mucho el cursor y confunde a quien esta viendo su tutorial.
Ai có thể giải thích chỗ 75 và 65 cho tôi hiểu dk ko?
I want to know what type of computer do you have. I have a pc whit core i7 n 16gb ram but you pc is hard core lol.
Misael Zapata perforación de tubo cuadrado
use SSD instead of normal HDD.
there are like dozens of core I7, one of them is great, most are trash. SSD and more ram would help, a decent graphics card to to alleviate the video processing from the cpu
ua-cam.com/video/t0CNG_vSE5U/v-deo.html Watch my first CAD video. I have posted PC description in Video text.
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ua-cam.com/video/l45lRQ2wIF8/v-deo.html
Why is person drawing not talking because it's to be tutoring mos
Nice
i am content for this video i t is terrific
sweet
Harika çizimleriniz var ve siz mükemmelsiz :)
no sound sorry
Dear, please show your e-mailbox to us, ok?
I just think you've gotten too complicated in the construction !!!
Do you have any way to construction faster?
Real. It was painful to watch
would be better if just spoke a little
like si t'as pas envie d'aller en cours lundi :/
grave aha xD
So comercial is borred
this is great tutorial, but SW is most terrible software without user friendly layout
Dear how to download solid edge ?