Genius Craftsman Making Wheel Spanner From Old Axle Rod in Local Factory | Amazing Mechanics
Вставка
- Опубліковано 23 вер 2022
- Genius Craftsman Making Wheel Spanner From Old Axle Rod in Local Factory | Amazing Mechanics
#genius #craftsman #making #wheel #spanner #from #old #axle #rod #local #factory #amazing #mechanics - Авто та транспорт
Половина заняты тем, что перекладывают с места на место.
😄😄😄👍👍👍
Who's going to get wiped out first, the guy getting his lungs destroyed cutting the axles with the friction saw or the forge press operator going blind by molten steel?
Can you just imagine what your eyes would feel like after two weeks of staring at that shit all day?????
Когда я вижу Индуса босиком или сандалиях, возле раскаленного металла - тогда я понимаю что все хорошо 🤣
Климат жаркий, поэтому и в сандалиях. А в чем они должны быть? Люди работают. Может они годами складывают раскаленные детали в одно и то же место и у них выработалась механическая память на столько, что обходят это место даже когда там ничего нет.
@@user-xd3op8pi1h ссейфтищюз на ногах должны быть!!
Лайк твоему коменту
@@phillippe.cai. Там Загоруйко. Единственное сейфти в его имарате хинзир - кастрюля)
В кирзачах
Тб плачет
Теперь я знаю что значит выражение "из говна и палок"
У них на все виды деятельности одна тара- таз)))
А чего они туда-сюда всё перекидывают по 10 раз? сразу нельзя что ли складывать в тару в нужное место? Ппц
Окраска готового изделия выше всяких похвал.
😊
Ну ты же на диване лучше можешь.
@@sashat687 It's amazing
ua-cam.com/video/yBLWQX-wsbk/v-deo.html
@@sashat687 Знаешь, может. Зачистить от ржавчины точно. И загрунтовать.
Судя по цвету оборонный заказ!
У некоторых на ногах сланцы. Мне аж нехорошо стало. .
9⁹⁹ c'est une ⁹⁹
Когда мне молодому сотруднику мартеновского цеха рассказывали коллеги как наш мастер участвовал в стройке мартена в Индии во времена СССР. И как местных работяг били розгами, а мульду (бадью) в печь заносили хоботом слона, обернув асбестовой тканью, то мы просто ржали. Качество труда очень низкое для 2022 года. А ведь сильная держава с великой историей. Тот случай, когда вероисповедание тормозит прогресс и культуру чистоты.
10% work 20% throwing it on the floor, 70% picking it up again.
Yeah you'd think they could make themselves a wheelbarrow and maybe a table or something or at least a stand for their anvil. Working while sitting in the dirt sucks ass.
Don't forget the "moving the parts from one pile to another pile 3 feet away" part of the day
100%people like you only can comment..event can't do anything
@@Squidbush8563 Clearly, you're not familiar with Union work
Cuando vemos estos videos de hombres descalzos o en chanclas cerca del Metal caliente o fundido solo reafirma el meme de porque los hombres vivimos menos pero en estos países con suerte los hombres llegan a los 50 años.
I feel like there is a lot of double handling due to lack of work benches. Everything seems to get chucked in the dirt between stages of the process.
The Union probably fought for years to get the process that way
I watch the "Exorcist" when I want to scare myself, OSHA employees watch these videos 😁
They appear to needlessly stack things in one place only to move them and stack them in another.
GENIUS !
Gym memberships are expensive. This is free resistance training.
They must have been U.S. Marines!
@@edwatts9890 Maybe it's like a Cargo Cult and they learned by watching.
@@CraftAero : Yeah, maybe...
10:33 эпично выложил электроды)))))
9:11 офигенная соосность! кровь из глаз
Далее это исправляют, но потом на глаз приваривают рукоять. :)
@@Optical_eye гавно сварка, такие ключи приваривают иначе, ибо это быстро оборвется.
Why are all these videos genius or creative or some such bullshit. These people are workers doing a job they've been trained to do.
That said I respect them for their hard work and skill under conditions that will probably kill them at a young age compared to workers in any western country.
If they had an ounce of creativity or skill, they’d have improved the production process like the Chinese did 50 years ago.
The answer is simple. People get sucked into watching videos with grand titles, pure and simple. The person posting these videos understands that very well. Having said this "welcome to the club of I was suckered into watching this video".
Not true Andy. These people are working under a system of no government support and for minimal profit margins, which I imagine go to the owners who put no more into their shops than necessary. Keep in mind Pakistan has extremely cheap labor. The shop would not even have large die presses if the owner thought they could pound them out by hand, but time is money.
@@bpetnoi1472 I need to somehow filter out literally anything that says “satisfying” or “amazing”
I want to know where all those spanner’s go
Judging by the voices in the background this village has a serious helium leak.
У них есть шанс выжить после апокалипсиса
Я понимаю, что люди труда и уважаю их труд, но почему все на полу/земле и на корточках?
Да, тоже так думаю. Постоянно наклонятся и проводить долгое время на корточках я думаю плохо скажется на коленных суставах и позвоночнике. На месте владельца производства ( точно есть владелец, так как капитализм) я бы выделил пару человек и сварщика для изготовления пары верстаков и стеллажей места же много.
Ma che nazione ha queste fabbriche?
Как чудесно работает коробка скоростей шпинделя на токарном станке.)
Нарушения ТБ
@@danchenkoviktor а ни чо что они кидают раскалённые болванки прям к пропановому баллону ?
@@GermanBuranov они могут. Они на ТБ вообще кладут
Биение патрона просто жесть. Ну немного криво приварил - не беда!)))
Sad part is that the guy filming this has more money from this video than those workers earn in a year.
А что это вообще такое? Баллонный ключ? Если ключ, то это же пиздец.
Это ад какой то.По российским меркам охраны труда такое вообще невозможно.Когда видишь подобное ещё больше ценишь что живёшь в России.
ТБ просто агонь…
Safe to say that we have vastly different definitions of "genius".
I concur... Whilst i pee myself laughing at our zero emissions targets.. Face masks and safety for the foot soldiers.. Very bollywood funny 😹
Lol!!!
Yeah, I think there is an "exchange rate". Also, anyone with a soldering iron is instantly a "genius".
@@djpaulk
I also agree with your comments
I believe they're collecting the sparks from the chop saw in that barrel to keep the workshop warm when winter comes.
Я увидел наконец как гнут электрод)
@@user-ul7fz2mx4g зачем они их гнут? это что-то даёт?
@@user-ul7fz2mx4g в труднодоступных местах
@@user-ul7fz2mx4g вот я поэтому и спросил) ладно когда добраться сложно, или чтобы без маски варить "из-за угла" но они походу по привычке их гнут)
У нас в сельской кузнице раньше мощные тоцовые ключи или головки из поршневых пальцев дизельных двигателей делали
Раньше деревья были больше
@@Liam76 сегодня можно купить набор любого размера.
@@user-mq9eg9pc4i Только сталь как повезёт будет.
@@morozjaka ну пальцы поршневые ни из водопроводной трубы делались.
@@user-mq9eg9pc4i так я про покупные
Impressive skill, but I feel blessed that I don't have to work in such a place.
Blessed by sky daddy?
Abençoado de não nascer num país desses.
nothing any of those dudes was doing involved any kind of "skill"
Да эти люди, в тапочках , с камнем в руке любую цивилизацию поглотят!
Уважение!
Любую цивилизацию ввергнут в каменный век!
This shop needs a large punch & shear for cutting the shaft to size.. quicker and easier than using the oxy and friction saw. Also the socket should be forged directly on the long shaft thus making it stronger and saving time. Reusing the axle shafts to make these is a great idea otherwise. Good video, look forward to seeing more.
These guys do more for 2 bux a day than most Americans for ten times that though
Exactly my thoughts
Forging the socket directly on the long shaft would achieve a stronger result, but it would require an elaborate jig, and the press would have to be raised a yard higher off the floor to accommodate it .
My guess is that this work shop does other things apart from making wheel nut spanners . They are probably just fulfilling a transient order, and will be making something else soon, therefore re jigging just to make these spanners in one piece is not an option.
@@graememorris7820 ok, I can get behind that because I was wondering, hopefully they have more stamps than just one socket size???? They can do whatever they want with the axle shafts I guess, but I would just sell customers more size sockets! I saw a video of this Pakistani guy opening up a brand new rebuild kit for a truck..... Brand new pistons and sleeves, but I'm naive to these countries..... why do they have access to a brand new rebuild kit but not much access to brand new tools......
@@mitchweber7868 The "brand new" engine rebuild kit you saw, is probably made and out together in Pakistan too.
When you get a flat on you 10 wheeler, there is no service truck. No compressed air, no impact wrench. Grab your ball buster and get busy. Needs to be strong as a long pipe is placed over it for leverage. One axle, one wrench, great recycle. Cheers.
@from the dark side of the moon doesn’t have to look safe to be safe. Anyone that’s worked on heavy equipment can attest that at some point they’ve broken a tool or piece of equipment that “looked safe”. You work with what you have. If you can afford better tooling and safer looking equipment I’m sure all those guys would accept it.
No way any of those sockets would last under a 3/4 impact for any amount of time whatsoever.
Thank you for sharing your knowledge about key making factories and hard workers
The snap on of India!
Всё бы ничего но почему всё на полу да на земле.Надела ли бы верстаков,столов всё проще было бы работать
К земле тянутся .
Поживешь под санкциями с ихние!
Там ещё не изобретено колесо, что бы делать тележки
Это удорожает продукцию, тогда это дерьмо вообще никто не купит
Индусы жеж...
and these hard-working people gets less than $5 for a whole day .
I am Indonesian,i like a man hard woork
I now realise that dirt really assists lubrication, proven science.
I wonder who sells those safety flop flops 😱
настоящие сварщики варят без носков !!!!!🤣👍
И согнутым электродом
good working but need safety first
I was waiting to see the hardening and the sanding process!
But it's so common with this type of video, you take high quality materials, soften them nicely for easy editing and you're done :)
I feel terrible for these laborers. I have worked in some crap ass places, but wow this place takes the cake
Damn, clean your workspace at least once in a blue moon
Таких бы работяг к нам вместо среднеазиатов.
А самим построить заводы с хорошей ТБ и работать на них? Нет, пускай другие трудятся.
Трудиться полезно, труд сделал из обезьяны человека
This shop needs a bit of structure. Everything is so scattered and definitely not time efficient at all. I don't think I could handle working in a shop that is disorganized. That would drive me crazy.
Mein Vertrauen in das Werkzeug wäre begrenzt
This is what forging manufacturing looked 200 years ago… I wonder which year this video was made.. is it remastered ? Ohhh it’s. 2022😂😂😂😂😂😂😂😂😂
If they were genius, would they be working in that factory making just a lug nut wrench Amazing might be pushing it too.
Vejo que vocês são muito esforçados no trabalho.
Porém vejo que as condições de trabalho são precária, falta luva de proteção, óculos de proteção , abafador de ruído entre outros.
Parabéns pelo seu trabalho.
Tudo manual completamente diferente do Brasil.
No Paquistão e Índia, é como se fosse o Brasil dos anos 60.
ключевая проблема производства многих развивающихся стран- грязь на производстве. оставь то же оборудование, но добавь порядок и чистоту, нормы и хоть каке то отк (хотя бы для вида) и конечный продукт станет лучше
열악한 환경에서도 대단합니다 실용적이고 튼튼해보입니다
korean choi
Is that green paint he's using to paint the spanners(with his hands!) oil based!? That's nuts.
oil hell, its probably lead based
Maybe wrenching rather than nuts!
Все автоматически, везде робаты, люди отдыхают
Wspaniale że ludzie sobie jakoś radzą w trudnych warunkach i są pracowici. Chwała im za to.
Ipu
A marreta é instrumento de precisão
Amazing 🤣🤣🤣🤣🤣🤣🤣
инструменть арсенал вот где делают
Tận mắt chứng kiến bạn làm mới thấy được sự khó khăn của công việc hay lắm
a Lot of unnecessary steps - likely make more parts they could buy more food -
paint man could get rubber gloves -
I’m kind of shocked I have never seen anybody in these videos sweat even when they are working around all that heat I have never seen one sweat, let me know if it’s only me ? ✝️✝️✝️
I love Bagwan's nice neat stacking
Geniuses of inefficiency
👍👍👍!!!
Awesome to see the essence of production. Can we buy these tools at Amazon?
Amazon has been selling shit like this for years.
I'm surprised how many fingers and toes featured in this video!
Aku herannn kok pekerjanya tidak pelindung hidung masker
Bah! Bancada de trabalho no chão!!!Coitada dessa gente.
Literalmente pintado a mão.... Mas de qualquer forma parabéns pelo trabalho.
Still don't know why they wouldn't make themselves a bench
Quite fitting that an axle be changed into the tool that then removes the nut..
Genius? Really? Wouldn't a genius make a machine to do this & not be working in squalor?
This man is doing what he must to survive another day.
Китай так же начинал. 50 лет эволюции и будет норм. Главное, чтоб демокрмтия не случилась)
Bravo 👍
Наверно эта херня часто ломается, если они их столько много делают.
عمل ممتاز جدا ممتاز
Top o vídeo
uno genios creadores!
The reason behind that many little transports between phases have to do with where the owner of the next machine lives. In some cases, there is not a big factory scheme, but a group of people with different means combined to get a final product. Being this group in the same street or village, old guild style that spreads the works, and the income among more people at the expense of efficiency. It would be no surprising to see child labour, as normal part of the apprenticeship of the family business as, to certain extent, some of us did. Coul it de filmed in Pakistan?
Вы до сих пор уверены, что у вас плохая работа? ))
Jed Clampett: "The wheel on that there chop saw is 'bout done wore out!"
My from Indonesia..👍👍
Fantastic super fantastic
if they can make those a weighted socket 19mm and 22mm. They will become millionair overnight.
Ok obrigado não precisa de
просветите для чего они гнут электрод перед сваркой?
Удобнее варить. Сварной отопление от стены тоже так варил изгибая электрод .
Название ролика видели? Они же "гениальные", вот и изгибают электрод😂
Eso se ase para trabajar desde una posición cómoda y un angulo de soldadura diferente 😎
love watching the ultimate recyclers at work.
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
Super skill
Good morning
Show!!
Alexania | Goias
BRAZIL
Сейчас доктор дью повторит эту самоделку и проверит ляхометром!!!!!
ط
On today's episode of How Its Made India
Judging by the color and the number of "identical" ("similar"?) units, I am guessing that this work was done to fulfill a military contract.
Those are wrenches for heavy truck wheel nuts, they are all the same size. I doubt the military wants janky wheel nut wrenches, but in these countries, you never do know.
Hardd work widaout wearing protecton
Amazing skill
👏👍👏
откуда столько металлолома, кислорода, пропана у нищих
Good Job....👍👍👍👍👍
Absolutely