hello! Depends on the position of the second lever, if the lever is in transport position the pump keeps pumping but the pressure is regulated to hold the arms in the highest position. if the lever is in positon "auxiliary hydraulic" the pump keeps pumping at maximum pressure (~170bar)
Is this an MK II since the hydraulic filter is pointing up?? MK III has it pointing down and is changes by opening the small lid at the bottom of the housing?
I need help for massey ferguson 135. Multipower is crash in tractor and i need original new pump. Please if have some information send me message. Thanks of lot.
Hello again. My cousin's MF-135 has a problem with the hydraulic system, lift arms are stuck in up position. From what i've found on internet, the control valve might be stuck. Could you please tell me if you pull the control valve lever, will it stop pumping oil up, or it is normal to pump continuously?
Hi i have a Massey Ferguson 165 with Perkins engine i have noticed when i push clutch in the rear hydraulic arms will go down and when i let clutch out they come back up also when i turn engine off arms go back down would you know what it might be.
Hi. You have got a so called double clutch which actuates on fist staged the PTO and the hydraulic pump and on second stage the transmission. You could adjust the clutch pedal on the clutch lever to either actuate the transmission only or both the transmission and the hydraulic pump. There are two holes on the clutch lever to adjust this function. If the hydraulic pump is disconnected from the engine (clutch released) the pump is not rotating and there will be no pressure generated and the arms will go down immediately.... this is absolutely normal on these MF models
why not repair it, whats wrong with the Multi Power? slipping clutch? in most cases the Multi Power input shaft is the main issue. I did a whole overhaul of the input shaft assembly look at my channel in 3 parts it is described step by step how to overhaul it by your own!
hello! Depends on the position of the second lever, if the lever is in transport position the pump keeps pumping but the pressure is regulated to hold the arms in the highest position. if the lever is in positon "auxiliary hydraulic" the pump keeps pumping at maximum pressure (~170bar)
EngineerLikesFarming
Is this an MK II since the hydraulic filter is pointing up?? MK III has it pointing down and is changes by opening the small lid at the bottom of the housing?
أخي ممكن تعرفني ايش السبب ويكون مترجم باللغه العربيه شكراََ لك
it's an UTTO (Universal Tractor Transmission Oil) it fulfills the MF-1135 oil specification
Salut monsieur moi c'est Raphaël un mécanicien de tracteur MF je veux un très bon relation à-propos des tracteur
I need help for massey ferguson 135.
Multipower is crash in tractor and i need original new pump.
Please if have some information send me message. Thanks of lot.
Very nice sir I'm from India
Quel sont les panne qui peux en perché une pompe hidraulique a soulever la charu
Hello again. My cousin's MF-135 has a problem with the hydraulic system, lift arms are stuck in up position. From what i've found on internet, the control valve might be stuck. Could you please tell me if you pull the control valve lever, will it stop pumping oil up, or it is normal to pump continuously?
what kind of oil do you use?
hyy chutch dabane se hydrolik down kyo ho jata h kaha se hota h
Hello!
Hi i have a Massey Ferguson 165 with Perkins engine i have noticed when i push clutch in the rear hydraulic arms will go down and when i let clutch out they come back up also when i turn engine off arms go back down would you know what it might be.
Hi. You have got a so called double clutch which actuates on fist staged the PTO and the hydraulic pump and on second stage the transmission. You could adjust the clutch pedal on the clutch lever to either actuate the transmission only or both the transmission and the hydraulic pump. There are two holes on the clutch lever to adjust this function. If the hydraulic pump is disconnected from the engine (clutch released) the pump is not rotating and there will be no pressure generated and the arms will go down immediately.... this is absolutely normal on these MF models
*****
thank you very much for your help much appreciated regards Farmer from Australia..
why not repair it, whats wrong with the Multi Power? slipping clutch? in most cases the Multi Power input shaft is the main issue. I did a whole overhaul of the input shaft assembly look at my channel in 3 parts it is described step by step how to overhaul it by your own!
EngineerLikesFarming wayring
Naresh1481988
Hub seal part imt tracter 560
A do Ford ano 80 você pode me ajudar
Trifecta cable a break solutions 835
this model is have hidraulic PTO ?
yes this model has IPTO (independent PTO)
*****
is good this hidraulic PTO? i whant to buy a MF 165 and I heard are more complicated hydraulic PTO against a mechanical PTO
Fendt FullVario had no issues so far, same PTO is also in my MF 590, also no problems
ok thanks my frend
@@EngineerLikesFarming à have prob in Massey 598 pto dont stop what the problème