Nice job! I will do this also. Thanks! I would recommend gluing the tip on first and then drilling the hole for the pin. That way you don't have to align the tip with the hole. Obviously your way works too 😉
Great video! I will be doing this 100%. My only suggestion (coming from a chemist) is when you're gluing, roughing up the surface (medium grit sandpaper is fine) and then clean with some acetone (nail polish remover). Your glue will hold much better. (if your curious) the fine dust from drilling and cutting can create voids and pockets in the glue. Thus weakening the glue strength. The *slightly* rough surface (no gouges) provides grooves for the glue to grip to.
Great idea! Can't find any bolts for my crossbow fishing set up I built in my area, so now I will finish by building my bolts!! Thanks!!
I am using the whole rod to make two 24 inch arrows. Can't wait to see how well they fly.
Nice job!
I will do this also. Thanks!
I would recommend gluing the tip on first and then drilling the hole for the pin. That way you don't have to align the tip with the hole.
Obviously your way works too 😉
Great video! I will be doing this 100%. My only suggestion (coming from a chemist) is when you're gluing, roughing up the surface (medium grit sandpaper is fine) and then clean with some acetone (nail polish remover). Your glue will hold much better.
(if your curious) the fine dust from drilling and cutting can create voids and pockets in the glue. Thus weakening the glue strength. The *slightly* rough surface (no gouges) provides grooves for the glue to grip to.
Nice work. New sub.
You can get the driveway markers at Lowes for $3.50.
Yes, I buy them by the dozen which is cheaper.
Diy bow fishing with fishing reel
What is the purpose of the safety slide, I just link my line to the head? I have only went bowfishing about four times, I'm a newbie.
The safety slide prevents snapbacks. If the line was to catch you arrows won't fly back into our face.
The snow stakes I bought don't fit my nocks. beware.
Do you have a link list where you purchased all of this? So happy I came across your channel
Everything was bought from Amazon. Will try to add link in the description soon.
Check the description just added the links.
don't forget to subscribe for more great videos from our team.
What size drill bit?
9/64
has anyone personal done this for crossbow bolts ?
Did you use the bushings for slide stop? When i use them the stop won't tighten all the way
Yes, the slide stop has bushings.
@@rawhunting89 thanks! Have a good one
Putting a drop of glue in them before tightening the screw helps as well
desired lenth?
Shafts are 32" without knock and tip.