Your videos shows the full details how to set up a mining process. I had seen many videos but yours Bravo Man... Thanks for the tremendous video and showing in full details process...
Great video! I had my near 10 year old dell laptop and tried out unmineable. Not a hash rate expert but I'm getting about 497 H rate per second for mining shiba
Thanks a lot! Check out my video on mining faster with your CPU as that might help improve your hashrate more. The video here: ua-cam.com/video/mPyC9phncH0/v-deo.html
I've been following for a time but I always come back to this video. If I'm understanding you correctly I can run 2 different computers on this platform
Very useful. I find it hard to find clear videos but this one helped. Got one additional question though. Would it be possible to run multiple BAT files? i.e. mining multiple coins at once?
Thanks for your support! Yes you can if you configure them properly. If you only have 1 GPU for example you can use a bat file and tell it to use half the GPU cores or intensity and the other uses the other half. If you have more than 1 GPU, define 1 in a batch file and the other in the other for a different coin. Same for CPU, some threads for 1 bat file and coin and the rest for the other. Or even 4 bat files and coins and divide threads by 4 in each bat file. Here is another video of mine of how you can do that even with unmineable: ua-cam.com/video/ERRHgLfS_fU/v-deo.htmlsi=ZNwQ9D9ZDGFV9YIg
I followed all the procedure you told in your tutorial but still i am getting the error "dns error temporary failure" can you please let me know why its so?
It goes to the unMineable slave wallets that are linked to your actual wallet address for the coin you are mining until you reach the minimum payout threshold, after which it will go to your wallet.
I have 2 questions when you open the XMrig file dose it just start mining instantly and what is the minimum of coin to deposit to your wallet and dose it deposit the coin instantly to your wallet.
If you are "mining" on the unMineable pools it depends for which coin. When you start the bat file it starts mining automatically and will always send what you mined to the wallet on unMineable that you specified in the bat file. Them from unMineable you search for the coin you are mining and enter the wallet address for it and you will see your balance. For the funds to go to your actual wallet on an exchange or wherever you have it, you need to hit the minimum threshold on unMineable for the particular coin you are getting paid out in. Hope this makes sense now 😊
From the unMineable site you can click a coin and then click the RandomX algorithm and use the calculator and enter your hashrate. Your hashrate for RandomX will always remain the same for all coins, but that way you can calculate how many of that coin you will make in a day, then check the price of it and do * the number of coins you would make in a day and you will have your answer and will be able to determine which is best at that time ;-) You can also use the website whattomine and enter your hashrate under RandomX and it will list all the coins at a glance and you can see what you would be making easily and which one is best.
so if im mining etc and put my coinbase wallet address in ! is etc coin gonna be deposited to that wallet or still in unminable ? also how long til its deposited ? or is it just added to unmineable ?
If you put in your coinbase wallet, once you have reached the minimum threshold for payout on unMineable, you will be paid out to your coinbase wallet and it will take 4hours from when you reached the threshold to get paid. For ETC the threshold to reach before payout is done is currently 0.12 ETC, just make sure you have the auto payout when threshold is reached button set to on, otherwise you can pay out manually once you have gone over the 0.12 threshold.
followed your instructions... got it running, but one of the messages I see in my command line list after running the .bat file is "failed to apply msr mod hashrate will be low" hmmmm
Thanks for that brief and important lecture, I tried first time it worked, but going back to it again, it saying temporary failure, how can I trouble shoot it, thanks
Hi, no you don't. This is doing what the unmineable app would do automatically however by using the script you can see more details of what is happening etc.
Thanks a lot for your support! If you are mining on unmineable you need to go to the coin section and select the coin that you are mining and then there is a field where you enter your wallet address and it will tell you your balance. Alternatively you could use the unMineable app and while mining with the app it will show you the balance in real time, but I prefer using scripts for mining and checking the balance the other way.
I must be doing something wrong here but not really sure what. I've got it all running and appears to be set up correctly however I am not getting the "accepted" message on the script. Please advise.
Could you please do a video on how to decipher all the jibberish (if you will) on the XMRIG Miner. I understand some of it but should understand everything I'm seeing. Thanks In Advance. Great Videos By The Way!!!
Thanks for watching and for your support! Is there anything specific that you want to know. This setup guide is fairly straight forward to follow. Is there something you are stuck on?
How do you set up the miner to use two different kinds of GPUs at the same time? I have a ryzen 5 and an NVIDIA and one is using the system memory and it wont allow it to use more than 2 gigs at a time. The NVIDIA works at 4gigs and runs fine on kawpow, but I can not set the miner to understand that the AMD one can't use kawpow.
Correct yes, the mining address is the wallet address you have for the crypto you are mining which you get from an exchange for example or any other wallet you use for that particular crypto coin / token.
I have done as shown in the video..mmm but it says "FAILED TO APPLY MSR MOD,HASHRATE WILL BE LOW" in one of those lines of code when I run the text batch file. It will still mine right? Help me I'm new to this.
@@ThatTechoGuy hi i do run it as an administrator but i get the message that im administrator from another location in windows and the cmd just closes... do you know how do i run it as an administrator just as i right click on the .exe ?
@@EduardoTavasci hi, you need to have the exe and batch file (. bat) in the same folder and then you can right click the bat file and select run as administrator.
I give XMrig to run as Administrative also restart pc , nut its te same I get FAILD TO APPLY MRS MOD ,YOUR HASHRATE WILL BE LOW, what to do ? I try everything I runining it on windows 10
Have you created a shortcut of the bat file and then run the shortcut? Also right click xmrig.exe and check properties and make sure that run as administrator is ticked.
@@morryweisfeld3931, I think you should look at where your hashes are going. The bat file is where you tell the program to send the rewards...AKA your wallet. There are a few vids explaining it and showing how to do it so that you get the credit.
I'm glad you are mining! No you do not need to setup a bat file, but if you do, it will show you more things like accepted shares etc. that the unmineable app does not directly. Also if you setup a bat file for your GPUs (using phoenixminer or t-rex for example) then it will show things like temperature and power consumption as well, which the app directly does not!
Please help me with this tutorial, more precisely when I run the program it gives me a message: "msr service WinRing0_1_2_0 already exists", "msr service path :\?\\C:Program Files(x86)\Awesome Miner\LibreHardwareMonitorLib.sys"WinRig0_1_2_0 already exist , but with a different service name", then this : " msr service registered valuest Ryzen...in green color"
Usually how long will it take to show your 24h rewards? I didn't make any penny after 2 hours of SC mining! My Xmrig was running perfectly without any err
Was your worker showing up when you search your wallet address from unmineable? After 24hours it will show you what you made in the last 24hours but your balance should start increasing slowly continuously after around 20mins.
After creating batchfile and when i click the file it showing xmrig is not recoganized as internal or external command or batchfile plzz tell a solution
The bat file needs to be in the same folder as your XMRIG.exe file and you need to allow XMRIG.exe to run as administrator. Is that what you have done? Try to see the video again as if you follow it exactly you should not have any issues.
Check out my video here to enable huge pages: ua-cam.com/video/mPyC9phncH0/v-deo.html When you start seeing a hashrate like 600h/s for example, after 30mins go to the unMIneable website, select the coin you are "mining" and then enter your wallet address, click the algorithm tab you are mining on, like for CPU it is RandomX and you should see your worker there and that way you will know it is mining correctly, plus your total balance will start to increase.
at first i didn't setup a start. bat file. i started cpu mining and it went well. but after i saw your video made a star.bat file and then my msr segment didn't went well and hashrate become low. what to do?
Hi, thats an issue I found in the past as well. It resolves if you right click the unmineable file and Run as Administrator. Also make sure that you have updated miner file location and selected either Phoenixminer.exe for GPU or xmrig.exe for CPU and that you have excluded/whitelisted the folders were the miners are from your antivirus/security app. Hope this helps! 😊
@@churchill_x are you using the unmineable app, or through script like I show in this video? You need to make sure that you are running as administrator if you're using the app and set xmrig.exe to run as administrator from the compatibility tab.
Can you show me your script command, maybe there is something wrong there? You need to make sure your wallet address is correct for the coin you are mining.
I like your videos and follow your guides however trying to set up XMRig to input 3 simple things your coin your address and your worker something always Fails I have been trying to get this setup for months every time it says something different right now it says my XMR address is invalid when I have been using it for a year using unmieable's miner Everything is Correct on the website but the stand alone XMRig says my address is incorrect what am I Doing Wrong ? Please any help would Greatly Be Appreciated
Run XMRig in administrator (right-click xmrig.exe and from compatibility tick the box run as administrator) That will give XMRig full access to the MSR Mod if you are an administrator on your system., and then just run your script (.bat file) from the same folder.
You need to use the .bat file as that file has all the parameters to call the exe file and include your wallet address and other instructions as specified.
Hi, you will still be able to mine but your hashrate will be lower. Did you follow my Mine Faster with CPU video to enable Huge Page Files? The video link is here: ua-cam.com/video/mPyC9phncH0/v-deo.html
Your video is very powerful. I set up everything according to you. I'm able to have 2 worker to mine at the same time. One is 400 hash. And another one is staring at 3000 hash. It increase very fast. But only for a moment. Then everything slow down. Soon both worker not mining anymore. And I try to restart. The unmineable app couldn't START anymore. Any solution? I've try many thing include Uninstall unmineable. Still I couldn't start it. What might be the problem here?
Hi, thank you for your support and for watching! Are you running the unmineable app as administrator by right clicking it and selecting run as administrator? Also make sure that your miner location files in the app are still pointing to xmrig.exe and that everything is added as an exception to your antivirus software. If you are using a bat script, like in this video make sure you set xmrig.exe to run as administrator.
Hi, I'm mining with my Ryzen CPU which has 4 cores 8 threads but the mining only utilise 2 threads total, even at HIGH mining intensity setting. I tried the custom setting and put: --thread=8 --cpu -priority=5. It does run on all threads but hashrate only 0.18H/s. Is my custom setting code correct? Thanks in advance!
Try to leave priority out and see what that does, however using all threads will make it worse not better because there is no room for other OS processing tasks. You command looks good. I left mine as default on high intensity and it uses around 70% at the best hashrate I can get.
The version of Xmrig you used cannot be found and the new version doesn't have exactly what's in the video Please do you have an Instagram page or Facebook page where your videos are clearer
Hi, this video was made quite some time ago, so version will have changed since then, however let me know what your issue is and I will do my best to help you here.
Your videos shows the full details how to set up a mining process. I had seen many videos but yours Bravo Man... Thanks for the tremendous video and showing in full details process...
Thank you very much I try to be as detailed as possible and I'm glad it was clear and it helped you out!
Thanks for your support and for watching! 😊
Great video! I had my near 10 year old dell laptop and tried out unmineable. Not a hash rate expert but I'm getting about 497 H rate per second for mining shiba
Thanks a lot! Check out my video on mining faster with your CPU as that might help improve your hashrate more.
The video here: ua-cam.com/video/mPyC9phncH0/v-deo.html
hi how much time did it take
thank you because your so in depth with the actual situation you don't leave out any keep information i appreciate that
I've been following for a time but I always come back to this video. If I'm understanding you correctly I can run 2 different computers on this platform
Thanks. Yes you can!
Thank you for your detailed video ,just what I needed.
You're very welcome and thanks for your support and for watching ☺️
You daid absolutely everything that was needed, so thank you !
You're welcome glad I could help! Thanks for your support and for watching! ☺️
Very helpful, thanks a lot for your time. Got me up and running as quick as your video. Thanks. Subscribed.
So glad I could help! 😊 Thank you so much for watching and for your support!
how to check the balance? the outcome? will it goes to the wallet directly?
yeAH
Very useful. I find it hard to find clear videos but this one helped. Got one additional question though. Would it be possible to run multiple BAT files? i.e. mining multiple coins at once?
Thanks for your support! Yes you can if you configure them properly. If you only have 1 GPU for example you can use a bat file and tell it to use half the GPU cores or intensity and the other uses the other half. If you have more than 1 GPU, define 1 in a batch file and the other in the other for a different coin.
Same for CPU, some threads for 1 bat file and coin and the rest for the other. Or even 4 bat files and coins and divide threads by 4 in each bat file.
Here is another video of mine of how you can do that even with unmineable:
ua-cam.com/video/ERRHgLfS_fU/v-deo.htmlsi=ZNwQ9D9ZDGFV9YIg
I followed all the procedure you told in your tutorial but still i am getting the error "dns error temporary failure" can you please let me know why its so?
Hi, how fast does the coins get transfered to my account? And does fees change my income? Great tutorial by the way!
I'm wondering too I've had it running for about 3hrs now and made $0.1 USD. Lol 😆 how long does it take ?
How fast does it go to your unmineable balance? Mine doesnt show up!!
Hi thanks for help a lot! But how do I check how much I mined of coin already if I have less then a min. Payout.
Thanks! I use Ubuntu, but hopefully I can transfer some of what I've learned.
augh ... so are we opening the unminable program at all? or is Xmrig doing all of the work?
Thx Man :) Is the coin going into the Unmineable account or going straight to the Wallet?
It goes to the unMineable slave wallets that are linked to your actual wallet address for the coin you are mining until you reach the minimum payout threshold, after which it will go to your wallet.
Thanks man this video really helped me out...keep it up
Glad to help and thanks for watching and for your support 😀
Really appreciate. Great video.
Very welcome and thanks for your support and for watching! 🙂
Which one more good for this mining ram or graphic card?
Graphics card
@@ThatTechoGuy thank you ✨
I have 2 questions when you open the XMrig file dose it just start mining instantly and what is the minimum of coin to deposit to your wallet and dose it deposit the coin instantly to your wallet.
If you are "mining" on the unMineable pools it depends for which coin. When you start the bat file it starts mining automatically and will always send what you mined to the wallet on unMineable that you specified in the bat file.
Them from unMineable you search for the coin you are mining and enter the wallet address for it and you will see your balance.
For the funds to go to your actual wallet on an exchange or wherever you have it, you need to hit the minimum threshold on unMineable for the particular coin you are getting paid out in.
Hope this makes sense now 😊
Awesome !!! Thank you so much. I m mining now😉
Glad to help ☺
Which coin would you recommend is the most profitable to mine ?
From the unMineable site you can click a coin and then click the RandomX algorithm and use the calculator and enter your hashrate. Your hashrate for RandomX will always remain the same for all coins, but that way you can calculate how many of that coin you will make in a day, then check the price of it and do * the number of coins you would make in a day and you will have your answer and will be able to determine which is best at that time ;-)
You can also use the website whattomine and enter your hashrate under RandomX and it will list all the coins at a glance and you can see what you would be making easily and which one is best.
unmineable doesnt have get started with xmrig
please help
Hi!! Hi! because mine doesn't show up: "mrs" register values "Intel" preset have been set successfully ??
Great video and thank you!!!
Thanks for watching and for your support! ☺️
How much can i earn on standard laptop and what is the most profitable coin or coins right now thanks.
👍 Thank you !!!
Very welcome! ☺️
I'm consistently benching my i5-12450H so that the hashes shown on the benchmark board more accurately. 1700 h/s btw.
so if im mining etc and put my coinbase wallet address in ! is etc coin gonna be deposited to that wallet or still in unminable ? also how long til its deposited ? or is it just added to unmineable ?
If you put in your coinbase wallet, once you have reached the minimum threshold for payout on unMineable, you will be paid out to your coinbase wallet and it will take 4hours from when you reached the threshold to get paid.
For ETC the threshold to reach before payout is done is currently 0.12 ETC, just make sure you have the auto payout when threshold is reached button set to on, otherwise you can pay out manually once you have gone over the 0.12 threshold.
@@ThatTechoGuy also ment to ask using the xmrig software do u get a bigger hash than u would using the normal unmineable ?
I try to put 2 PC for minig but when consult the pool said just have 1 worked how can I fix?
after the whole setup. it was giving me disable. DNS error. what could be the cause that i'm using my phone hotspot for my internet .
followed your instructions... got it running, but one of the messages I see in my command line list after running the .bat file is "failed to apply msr mod hashrate will be low" hmmmm
Thanks for that brief and important lecture, I tried first time it worked, but going back to it again, it saying temporary failure, how can I trouble shoot it, thanks
Hey thanks for watching. Can you try to remove the xmrig you have and download the latest version and try again?
Also be sure to run as administrator.
Is there a way i can check if i am actually gaining the crytpo im mining
I've done the same, but my question is do I need to run unminable application after running the bat file ?
Hi, no you don't. This is doing what the unmineable app would do automatically however by using the script you can see more details of what is happening etc.
How to withdraw the coin
great video it work !!! thank you !! quick question how do i check how much i mined? thanks
Thanks a lot for your support! If you are mining on unmineable you need to go to the coin section and select the coin that you are mining and then there is a field where you enter your wallet address and it will tell you your balance.
Alternatively you could use the unMineable app and while mining with the app it will show you the balance in real time, but I prefer using scripts for mining and checking the balance the other way.
Mine is Mining but it is not registering in my wallet and when I go to the Daemon log it reads that it is not mining. What should I do?
its been 2 years and yes everything works, but can you tell me how i can solo mine monero? do a video please
I must be doing something wrong here but not really sure what. I've got it all running and appears to be set up correctly however I am not getting the "accepted" message on the script. Please advise.
Could you please do a video on how to decipher all the jibberish (if you will) on the XMRIG Miner. I understand some of it but should understand everything I'm seeing. Thanks In Advance.
Great Videos By The Way!!!
Thanks for watching and for your support! Is there anything specific that you want to know. This setup guide is fairly straight forward to follow. Is there something you are stuck on?
what should I mine with?
CPU - i7 9700f 3GHZ or my GPU?
GPU - RTX 2060 SUPER 8GB OC?
Definitely your GPU will be much faster and efficient but if your system is going to be switched on anyway might as well use both 😃
Subbed and liked. You have the MOST thorough and EASIEST guide out!
Thanks so much for your comment, for watching and for your support! 😊
How do you set up the miner to use two different kinds of GPUs at the same time? I have a ryzen 5 and an NVIDIA and one is using the system memory and it wont allow it to use more than 2 gigs at a time. The NVIDIA works at 4gigs and runs fine on kawpow, but I can not set the miner to understand that the AMD one can't use kawpow.
So I don’t need to create a Bat file as long as my address “Coinbase” for example is linked for the correct coin I’m mining? I’m also mining cpu.
Yes you need a bat file otherwise you won't be mining anything. You use your wallet address for the coin you want to get paid out in, in the bat file.
So if i was supposed to mined both with the GPU and CPU at the same time using uMineable Miner, would that slow down my hashrate?
No, just as long as you don't use all your CPU cores and leave at least 1 for the operating system to run. 😊
GREAT VIDEO BRO. THANKS. GOD BLESS
You're welcome thanks for your support and for watching! 😊
thank u u are greatly explain for me
You're welcome and thanks for your support! ☺️
thank you bro.. ur such a great help..
You're welcome 😊
How do I set up the mining file. I can only get a desktop shirt cut to the download files
I have a cpu 4 threads and see only 1 for mine, have you found how to resolve this?
Fantastic video thanks
Very helpful! You rocks ! Cheers Brazil 🍾🚀🎉 !
Thanks for your support and for watching! 😊
I'm getting a message on the command screen "dns error unknown node or service".. after running the start.bat
What does he mean by mining address? Is that something like his cryptocurrency wallet?
Correct yes, the mining address is the wallet address you have for the crypto you are mining which you get from an exchange for example or any other wallet you use for that particular crypto coin / token.
I have done as shown in the video..mmm but it says "FAILED TO APPLY MSR MOD,HASHRATE WILL BE LOW" in one of those lines of code when I run the text batch file.
It will still mine right? Help me I'm new to this.
Hi. Yes it will still mine. Make sure you are running the script as Administrator. Right click it and select run as Administrator.
@@ThatTechoGuy hi i do run it as an administrator but i get the message that im administrator from another location in windows and the cmd just closes... do you know how do i run it as an administrator just as i right click on the .exe ?
@@EduardoTavasci hi, you need to have the exe and batch file (. bat) in the same folder and then you can right click the bat file and select run as administrator.
@@ThatTechoGuy I cant find the batch file. where is it??
Do you have a video for setting up "Huge Pages"? Thank you
Yes of course, here it is: ua-cam.com/video/mPyC9phncH0/v-deo.html
Very good thanks mate for the help and info
My pleasure and thanks for watching and for your support! 😊
How does this work, do I need to open unmineable?
I give XMrig to run as Administrative also restart pc , nut its te same I get FAILD TO APPLY MRS MOD ,YOUR HASHRATE WILL BE LOW, what to do ? I try everything I runining it on windows 10
Have you created a shortcut of the bat file and then run the shortcut? Also right click xmrig.exe and check properties and make sure that run as administrator is ticked.
Hi techo guy i need your help on this
my xmrig is not running after following your steps
please can you help me
Thanks for the video, I never setup the Bat file and I'm mining. Do I have to do that step, my hasrate is super low but I'm in for the long haul
if you dont set up the Bat file how do you think you'll be getting paid?
@@raymondturpin3265 It says my wallet is connected and I m getting hashes...unless I'm off somewhere what do you think?
@@morryweisfeld3931, I think you should look at where your hashes are going. The bat file is where you tell the program to send the rewards...AKA your wallet. There are a few vids explaining it and showing how to do it so that you get the credit.
I'm glad you are mining! No you do not need to setup a bat file, but if you do, it will show you more things like accepted shares etc. that the unmineable app does not directly.
Also if you setup a bat file for your GPUs (using phoenixminer or t-rex for example) then it will show things like temperature and power consumption as well, which the app directly does not!
What a great tutorial, thanks allot for a quick minute lecture. keep up the good works.
You're welcome and thanks for your support and for watching!
Can I pause it automatically when a specific process needs the resources?
You can set to mine when idle or just limit the number of CPU threads to use so that other apps always have some resources.
Thanks for the info.
tysm man that helped a lot
Please help me with this tutorial, more precisely when I run the program it gives me a message: "msr service WinRing0_1_2_0 already exists",
"msr service path :\?\\C:Program Files(x86)\Awesome Miner\LibreHardwareMonitorLib.sys"WinRig0_1_2_0 already exist , but with a different service name", then this : " msr service registered valuest Ryzen...in green color"
mine still tells me HUGE PAGES: unavailable
I do not know what i did wrong
how do you use other miners threw xmrig for mining the cpu
Hello, where did you get your address line from here 7:12 ? Just so i know where to look
Usually how long will it take to show your 24h rewards? I didn't make any penny after 2 hours of SC mining! My Xmrig was running perfectly without any err
Was your worker showing up when you search your wallet address from unmineable?
After 24hours it will show you what you made in the last 24hours but your balance should start increasing slowly continuously after around 20mins.
@@ThatTechoGuy just stared mining it about 10 minutes ago. Hoping i earn something since my comp is from 4 years ago. Lol.
I don't know but it is giving me such problem why software cause disconnection
After creating batchfile and when i click the file it showing xmrig is not recoganized as internal or external command or batchfile plzz tell a solution
The bat file needs to be in the same folder as your XMRIG.exe file and you need to allow XMRIG.exe to run as administrator. Is that what you have done? Try to see the video again as if you follow it exactly you should not have any issues.
I am unable to download or extract one file. The main exe. file is not getting extracted. Why? Pls help
It is probably getting blocked and deleted by your antivirus software or Windows Defender. Did you add it to your exceptions list?
Sir, my huge pages is unavailable
What to do, how do i know the mining has started,
I have a laptop of 4 GB RAM
Check out my video here to enable huge pages: ua-cam.com/video/mPyC9phncH0/v-deo.html
When you start seeing a hashrate like 600h/s for example, after 30mins go to the unMIneable website, select the coin you are "mining" and then enter your wallet address, click the algorithm tab you are mining on, like for CPU it is RandomX and you should see your worker there and that way you will know it is mining correctly, plus your total balance will start to increase.
hello how can we limit cpu usage?thanks
I can't make the exe file a admin when I right click I don't see properties
Gigachad detected.
at first i didn't setup a start. bat file. i started cpu mining and it went well. but after i saw your video made a star.bat file and then my msr segment didn't went well and hashrate become low. what to do?
You need to make sure that you run the script as administrator. Right click it, go to properties, compatibility tab snd tick Run as Administrator.
@@ThatTechoGuy i did it. new problem is my hashrate became low. before start a bat file it was 1000+ now its 399h (calculated). any solution?
I have a problem with unmineable. When I click start it stay saying starting but for how long?..it never starts mining
Hi, thats an issue I found in the past as well. It resolves if you right click the unmineable file and Run as Administrator.
Also make sure that you have updated miner file location and selected either Phoenixminer.exe for GPU or xmrig.exe for CPU and that you have excluded/whitelisted the folders were the miners are from your antivirus/security app.
Hope this helps! 😊
Please I've tried doing it but it's not working
Whats the issue, are you getting an error?
@@ThatTechoGuy yes like and the hash rate isn't showing and the huge pages isn't working
@@churchill_x are you using the unmineable app, or through script like I show in this video?
You need to make sure that you are running as administrator if you're using the app and set xmrig.exe to run as administrator from the compatibility tab.
@@ThatTechoGuy yes I am using the both but none is working and I think my laptop isn't compatible for it cos I've tried
thank you very much thats work 100%
Glad to help and thanks for your support and for watching!
im getting unsupported coin or token error any help?? my buddy is using the same script on his cpu we both basically have the same cpu
Can you show me your script command, maybe there is something wrong there? You need to make sure your wallet address is correct for the coin you are mining.
how setup for bcn mining ?
Can you help me it shows connect error and operation canceles
Can i mine laptop AMD Ryzen 9 5900hs CPU?
I like your videos and follow your guides however trying to set up XMRig to input 3 simple things your coin your address and your worker something always Fails I have been trying to get this setup for months every time it says something different right now it says my XMR address is invalid when I have been using it for a year using unmieable's miner Everything is Correct on the website but the stand alone XMRig says my address is incorrect what am I Doing Wrong ? Please any help would Greatly Be Appreciated
Can you send me your batch file code here so I can have a look please?
What to do if I get msr failed to start WinRing0 driver, error 183 and msr failed to apply msr mod, hashrate will be low?
Run XMRig in administrator (right-click xmrig.exe and from compatibility tick the box run as administrator) That will give XMRig full access to the MSR Mod if you are an administrator on your system., and then just run your script (.bat file) from the same folder.
@@ThatTechoGuy I did those settings. No change. Any other ideas? Btw I have amd5800x
but do i need to click on the .bat file or the xmrig.exe or doesnt is matter
?
You need to use the .bat file as that file has all the parameters to call the exe file and include your wallet address and other instructions as specified.
I need this video.....thanks....
Welcome 😊
Is there any chance you have a mac version?
Im not sure where to find 'my adress' to coppyt in the text document?
I followed everything you did but i got an error that "huge pages is unavailable". will I still be able to mine and also how do I fix that?
Hi, you will still be able to mine but your hashrate will be lower. Did you follow my Mine Faster with CPU video to enable Huge Page Files? The video link is here: ua-cam.com/video/mPyC9phncH0/v-deo.html
@@ThatTechoGuy thank you
Your video is very powerful. I set up everything according to you. I'm able to have 2 worker to mine at the same time. One is 400 hash. And another one is staring at 3000 hash. It increase very fast. But only for a moment.
Then everything slow down. Soon both worker not mining anymore. And I try to restart. The unmineable app couldn't START anymore. Any solution? I've try many thing include Uninstall unmineable. Still I couldn't start it.
What might be the problem here?
Hi, thank you for your support and for watching!
Are you running the unmineable app as administrator by right clicking it and selecting run as administrator?
Also make sure that your miner location files in the app are still pointing to xmrig.exe and that everything is added as an exception to your antivirus software.
If you are using a bat script, like in this video make sure you set xmrig.exe to run as administrator.
How much you mined btt?
Hi, I'm mining with my Ryzen CPU which has 4 cores 8 threads but the mining only utilise 2 threads total, even at HIGH mining intensity setting. I tried the custom setting and put: --thread=8 --cpu -priority=5. It does run on all threads but hashrate only 0.18H/s. Is my custom setting code correct? Thanks in advance!
Try to leave priority out and see what that does, however using all threads will make it worse not better because there is no room for other OS processing tasks. You command looks good.
I left mine as default on high intensity and it uses around 70% at the best hashrate I can get.
@@ThatTechoGuy Alright, thanks for the advice man! Keep up the good content!
what do u have to enter for monero?
The version of Xmrig you used cannot be found and the new version doesn't have exactly what's in the video
Please do you have an Instagram page or Facebook page where your videos are clearer
Hi, this video was made quite some time ago, so version will have changed since then, however let me know what your issue is and I will do my best to help you here.
@@ThatTechoGuy Can this text u used for that coin can the same text be used when you want to mine a different coin
Connection reset by peer error on unmineable Pls help
Were do I find my btt address in didn’t see in the video were to find it
Latest version of windows defender doesn't seem to block the latest version of XMRig
Thanks for sharing that info!
@@ThatTechoGuy No problem :)
hey where do i get my coins then? it goes instantly to my wallet?
Once the minimum threshold for the coin you are mining is reached on unmineable, it will be paid out to the wallet you provided in the script.