Це відео не доступне.
Перепрошуємо.
How To Rebuild A 1.3L Suzuki Samurai Engine (Part 1) Crankshaft Installation
Вставка
- Опубліковано 5 тра 2015
- This video shows how to install a crankshaft in a 1.3L Suzuki Samurai engine. It includes the installation of main bearings and how to check for proper main bearing clearance using plastigauge. Visit us at: www.lowrangeoff... or call 801-805-6644. We are your one stop shop for Suzuki and Toyota needs.
This is the most detail video i have found about engine assembly and funny enough the other videos i watched almost every engine block seem to be assembled the same way i love learning about these stuff
The joys of changing head gaskets in these. An cleaning pistons on a Saturday for Sunday romp in the Bush.
Not sure why you would put a metallic paste (anti-seize) right up against a bearing, seems a bit counter-intuitive. A tacky grease would have worked just fine. Those 1.6L Suzuki engines are fun to work on and very dependable. Should be a great rebuild!
I use a lot of assembly lube, or grease if I'm greasing something, but this is way overboard. Also I would have just used some regular "red and tacky" style grease on the thrust bearings. Anti seize is metallic.
Brad V i know right, he's treating it like his butthole prior to some prison rape. the anti seize also seems odd. he's taking such care to not scratch the bearings but then puts metal filing paste right next to them. very curious.
SuZuki ayare enjen
hướng dẫn kỹ thuật lắp động cơ 1.3l suzuki samurai và cách đặt cam rất chuyên nghiệp
that lube will get in the holes and when you torqu them it will hydro lock and not seat
Where is the "tear down" portion of the engine rebuild? Can you recommend videos on that?
Anti seize has fine metallic particles in it, Rather use a little grease, but wyns charge works best for me
Yeah. This yahoo just put anti seize (graphite) inside the engine. Glad that is not my engine.
@@stevene9785 It's copper anti-seize, not going to hurt the engine, especially that amount.
@@chippyjohn1 Never put anti seize on or in moving parts. Period
I know this series is old, but how about showing how to install a inexpensive turbo on the 1.3 with not a huge boost but enough to go good freeway speeds. That would be great.
IDK about the Japanese engines but almost all American engines main caps ARE torqued with oil on the threads... the sad thing is most people don't know that you get more/also more consistent "with" oil than dry, I disagree with Anti seize inside an engine, and prefer STP to "assy lube" I also put a very thin film of oil on the sides of the main caps where they slide into the block.
That's what i was wondering about too. First he torqued em to 41 with no lube, and in the end when I'm very that the lube got into the threads he torqued em to 41 aswell. But is that torque spec for lubed threads or dry threads?
Agree
lol I do the same when I lube it. Make sure to cover the bearings completely, every little spot counts.
Y10Q You are exactly right!! Thanks for the comment.
Is it safe to put assembly lube above the bearing like that where the cops come down and where the lubrication can get behind the bearing
Big glob of assembly lube down a main bolt hole 1 different torque then others that are dry and 2 if its a blind hole could pop out the casting to whatever is on the other side
Excellent video series, really informative and detailed. Just wondering if you have reused the bolts? I have really hard time finding new bolts for the connecting rods, crankshaft and camshaft.
good video....always bring the head to a machine shop when doing the head gasket.
Salam
I check it before incase with a flashlight to see if I can see it shine through
Two questions 1: how do can I get the block that clean from the inside ? I'm in the middle of starting a rebuild with parts from low range but I can't figure out how to get it that clean. 2: what paint do you guys use ? My block is sparkling clean but I would like that grey paint on mine as well . Thank you
Our blocks are boiled out and cleaned by the machine shop and the paint we use on them is called "Ford Gray". Hope this helps. Thanks for watching and commenting.
+lowrangeoffroad awesome yeah I can't boil mine but I used oven cleaner and it shines beautifully . Thanks for replying and thanks for the videos I will be using these videos for my first build ever so fingers crossed thanks again for the videos.
It would be really helpful to have a video on how to get the correct size bearings. How and what to measure and how to order new bearings...
When you get the crank machined they will let you know how much they cutt off. Ie .010 or .020.
thank you so much! this was such good instruction.
@lowrangeoffroad thanks a lot for sharing your knowledge, people like make the world better. i have a question, can i use your video as a guide to rebuild my 1996 geo tracker, 16 valve SOHC? is there some major difference?
No anti seize on bearings ! Engine oil or assembly grease only ! All the components need to be solvent washed and blow dried including the block then placed on clean rags. The bearings should be measured for thickness using a vernier caliper and the crank needs to be measured using a micrometer - if everything measures correctly it will be good to go ,
When torquing mains , rods, cylinder heads etc always go in 10# steps then check 3 times at full torque.
When you tighten the screws to the recommended torque, do you reuse the screws or change them?
Reuse
great videos does anyone know the crank shaft journal portions specs for a suzuki sj410 998cc year 1983
I am Excited see your tutorial.
I think this guy just has a thing for lube haha
How similar is this engine to the Geo tracker?
how much crankshaft can be re ground? 0.060 is maximum?
do i have to take my crankshaft and engineblock to a machine shop when i rebuild my engine??
I'm currently rebuilding a 1.3l myself. The block is tiny along with the pistons. 94 Mazda B3 1.3L SOHC
Efgufd
Good work .. Thank you ... I am from Baghdad
gracias por la ayuda que me han dado...
Stupid question: what size bolts are needed to fasten the block to the engine stand?
Excellent video!
+MadWeiner Thanks for viewing and commenting!
MadWeiner
you earn a subscriber
Thanks for subscribing!!!
geo tracker
lowrangeoffroad ಕನೆಡ
Youcef Mahdadi I
You can still get new parts for this engine?
The accuracy in the job
I run the car maintenance UA-cam channel in Korea. I'm always learning such a great ideas on your channel. I hope we have a chance to be together. Thank you.
What's the car scene like in Korea?
@@alansmilealot p)p)p)))pp)))p)))p)p)p)ppp))pppppppppppppppppppp)ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp
@@alansmilealot p
@@alansmilealot p
@@alansmilealot pp
Sweet
ROBERT Oliver
i am from algeria and i like your work
sahit wald bladi
Thanks All my teachers
Let's say
crankshaft caps,netbolt truque pod,Details
News papper to use for oil clearnce is best way, 1×1centimeter news papper,
Hey lowrangeoffroad. some years ago i did the same on my samurai engine and i instaled the crankshaft and pistons like you did, and torqued everything, but when i was going to try to turn the cranshaft and checking if it was loos, ther were 1mm clearance, and when i contacted the place were i bught the bearings, they said it was going to be like that. but no. so i had to stop rebuild my engin for a while.
Thanks for the question. I need to ask several questions. 1)How do you know you have 1mm clearance. That is a lot of clearance. You need to have about .025mm (.001") to .051mm (.002") 2 ) Was the crankshaft machined? If so how much was removed during the machining process from the rod journals and the crankshaft journals? This will give us a place to start. Once you have this information I suggest you call 801-805-6644 and ask for William. He is our Master Engine builder. He can answer your questions and help you with part if needed. Thanks for watching and commenting.
we clearly felt that it was aboute 1mm clearance with the new bearings on, but the crankshaft wasnt machind when i removed it from the block, but we belive it was machined when the previous owner had the car, and that he got custom made bearings with it. but i have a new engine (bouhgt it with a case of 24 beer's) now because my dad let the block stay outside so it got rusted. so im going to rebuild the new engine, and buy a new camshaft and rocker arms, and then get the crankshaft machined with custom bearings with it.
living in norway, so it will be a bit difficult to call William because the time diffrence. but i may be contacting you gus and order some parts for the car ;)
Great. Let us know if we can help. We will most likely have everything you need. You are about 8 hours ahead of us. So if you called after 5:00 pm your time we will be just getting started here. Call if you'd like. Or you could email us at sales@lowrangeoffroad.com. Good luck with the rebuild.
ok, Thanks ;)
me and my father had the same problem on a rebuild. we had an untouched crank, and just ordered a standard bearing kit. After assembling the engine and running it. we quickly discovered the bearings where too tight and ruined the crank along with the bearings. upon further research we discovered each individual journal on the crank actually has a different tolerance, some are very close to the same and some are quite drastically different in tolerance. never have we seen or heard of this before. Anyone else experience the same?? or ever heard of this??
thank you. this help me.
Can someone explain why the crankshaft is first installed and then taken out ?
He put those thin pieces of plastic to measure something on the crankshaft while its bolted down. So he had to bolt it down then he measured whatever those thin pieces of plastic measured once it was all clamped down. Then he Cleaned it off and greased it all up and reassembled. But it sounds like he was just double checking his machine shop's work to make sure it was machined correctly. So you could probably skip that if you trust yours or where you got the parts
عندي مثل هذا بس ناقل الحركه الكرنك يتحرك الى الامام والى الخلف
Where can i faind crankshaft yused Toyota Hilux turbo diesel 2.4 55 mm
Hi, Could I follow these exact instructions for a G13BA Motor from an 1988 Suzuki SJ Samurau? Thanks in advance!
+T332009 Yes, it is the same. Thanks for watching and commenting.
+lowrangeoffroad , thats great, thank you very much for answering. Could you please respond to my questions on your 1.3 samurai videos featuring cody - the ignition timing one and also the testing vacuum advance one. Thanks!
salam alikoum akhi ,j ai une daewoo tico et es que je peut remplacer le moteur par moteur maruti maruti ,conseil .....
Copper slip !!!!!!! Whaaaaaaa inside ur motor, u mad?? Watched upto that point and that's it!!
This is very helpful video for me . Thank you guys
You are welcome. Thanks for watching and commenting.
Sir I'm pakistan panjab .
but your video very interesting
very good..thank's for information ..brotheer
Thanku sir
hlo sir,I'm from India,Punjab
me too , but I must go now... I need to defecate on the beach !
ممكن الترجمة من فضلكم
awesome , thanks a lot and great job doing this great video. Respect
Glade you like them. Thanks for watching and commenting!
Hi, just curious, how similar is this engine G13A to the G13BA??
The blocks are basically the same but the heads are different. However, the rebuild procedures are very close to each other. Our rebuild video series could be used as a basic guide. But, keep in mind that not all parts are alike. You could learn more by following this link: en.wikipedia.org/wiki/Suzuki_G_engine . If you need help with parts or have further questions, our most knowledgeable person here at Low Range is William. Call during working hours and he will happy to assist you. Just call 801-805-6644 between 8 and 5 MDT. Thanks for watching and commenting.
+lowrangeoffroad thanks :)
Nice video. Is this Suzuki M13A engine or similar?
+Norsology No it is not. The engine used in the video is a G13A/B engine. It is a single overhead cam engine. Whereas the M13 is a dual overhead cam engine. Thanks for watching and commenting.
Norsology electric whyring
Toyota Cressida Toyota Cressida 18rg engine timing please
Be patient USA
Why put floppy gauge? minute 4:18
Excellent.
Where can i find this parts in america?
Thank you so much
Thank you so much
.............
On the conveyor, they don't know that they need to lubricate the crankshaft so much.
شكرا
Thank you sir,,
lube bolt threads & under bolt head!!!
i was wondering that too. dry torque bolt heads and threads don't torque as well as oiled ones do.
سلام عليكم شكرا علا الإستفهدا
من فضلك كيفة تركيب محرك بنزين 1.4لتر بيجو
Mrç
It's little like a motorcycle engine, it's adorable.
Nice build video but I do think you should put more lubrication on those bearings for first start lol looks like strawberry syrup.
الله ينور
70 hp . blowing my mind
Almost 75 with the camshaft and carb of the swift gs (1985/1986). Same G13A is in swift (or forsa etc) from 1983 to 1989
مبدع رائع شكرأ لك
I'm a mechanic From Bangladesh
LIKE good video
hi does anyone can help me where to find out the suzuki engine number..plse
The second picture in this article should give you some help with engine size. www2.izook.com/?page_id=270 Hope this helps.
Shout out lodz
Nice
Good
This my working ⚒
More videos please.
We are planning more. Thanks again.
It's very hard work to do
Music from Monkey Island 4...?
good
more lube!!
Elbow Grease
تجميع الكرنك كولف ف سته
Elbow Grease - that what she said
بشرفك ةةة علمك علتطبيق
تالاععانهعوةبببباببلغةىبغههزواخنوولآفاق اانتةبخه
What can ## is that??
Tang side first
let's lube everything !!!! lmao thx for video solid info
if anyone in texas can rebuild my chevy tracker 1998 please respond to this. i will buy all parts.
Send it to me in Wyoming.
Safer to use paper towel to wipe the shells and journals...
Francais
If lube gets on the threads you wont get a right torque
I like
I am frome india same my work
בבקשה תתרגם לעברית. עבודה מקצועית.
SuZuki enjen
this is a good assembler.. not even close to a mechanic
thank you !!!!!!!!!!!