Awesome guide, spot on to how I repair mine. Just a tip, the bearings don't need to come off the shaft as the entire shaft can come out with the circuit board still attached to it :) it may save time!
Thank you very much for the information my friend, I managed to fix my steering wheel and it was perfect thanks to your video. As a thank you, I mentioned your video on my UA-cam channel in the video showing the repair I made to my steering wheel based on your video. God bless you.
@Coisadiybricola no problem at all that's great news, glad it helped you fix yours and thank you very much for the mention, it's great to see more videos like this being made for other languages to understand, good work 👍
Class video mines been in the loft for years version 1... Basically whennim playing all of sudden tge wheel goesvout of alignment like the last part of this vid... Im gonna try this an see if i can fix it
@cater4anytink45 yeah try the last bit of the video first mate but doing it halfway through playing usually mean the motor as the glue is overheated. Give the last go a try but failing that, the whole guide is there for you to fix. Mine is version 1 also
pro tip maybe dont run the wheel at 100% ffb all the time set it like 75% or 50% and turn the ffb up in a game that should fix it and if it still get's to warm "press ST - Mode button" for forced cooling :)
@coleryder3172 good tips. Had my wheel years and it spent the last 3 years or so in an outdoor office, was fine before that then I recently got it back and soon as I used it was failed, dunno if damp got to it or it damaged in transit. I never knew about the force cooling until about a week before I did this fix lol
I can't believe this video was only from a month ago. I'm trying this when i get the jb weld. Is it important that even the little bits of blue stuff are removed? One side of my magnet is really clean but the other side still has tiny little bits. Do I have to worry about those?
@maxmesker562 in my opinion mate, I would think it would be ok to leave the hard blue glue on and just put the jb weld on the rest of the wheel. I only did it as I've mentioned from research and written guids. But yeah I'd say would be fine 👍
@maxmesker562 fingers crossed for you mate, if you need a hand then just reach out. It's honestly not as daunting as it looks, long as you've got a steady hand, take your time, you'll be good.
@@JackTerry87 Hey man, thank you so much! My wheel is working again. I hope it will last longer than a month this time😅. Would you recommend changing the fan or power supply? So far the wheel is working pretty good (forced cooling on).
@maxmesker562 oh that's brilliant news, well done 👍. If you used the jb weld and covered as much as I have then should be good for a long time. As for the fan or power supply I've read they can help, but there's also a 3d printed pipe you can get that goes from the fan and directly to the motor, it's ment to be far more effective than the fan change alone. If you look for the Facebook group thrustmaster owners group, look for the pinned post, and a mate of mine has wrote up everything to improve the t300 in great detail, everything's on there. I'm happy it's worked for you, do you find the ffb even stronger than before now? I feel it is, seems much more solid
@tog2842 I'm about an hour and a half away from Bolton lol. But honestly buddy it's not as daunting as it looks. Even if you don't have all the equipment, buying it all is still a lot lot cheaper then sending to thustmaster themselves or taking to a shop to repair 👍. Not sure how I feel about fixing someone else's, I'd hate the responsibility of if it didn't go right or did the work and that wasn't the issue lol. But I think I covered most the basics that match those symptoms. I'd say give it a go yourself, and if still not confident to do it's etc then contact me, I'll try and help 👍
Thank you so much for this video, clear,concise and helpful. Saved my TX wheel base.
@mikentinohossi awesome. No problem at all. Glad it helped you buddy
Awesome guide, spot on to how I repair mine. Just a tip, the bearings don't need to come off the shaft as the entire shaft can come out with the circuit board still attached to it :) it may save time!
Good shout, I did think there would be enough room for it, but it's what I seen done on a write up somewhere 👍
Thank you very much for the information my friend, I managed to fix my steering wheel and it was perfect thanks to your video. As a thank you, I mentioned your video on my UA-cam channel in the video showing the repair I made to my steering wheel based on your video. God bless you.
@Coisadiybricola no problem at all that's great news, glad it helped you fix yours and thank you very much for the mention, it's great to see more videos like this being made for other languages to understand, good work 👍
thank you very much 🙏🙏🙏
@Jayden-710 thats ok. Have you done the repair?
Class video mines been in the loft for years version 1... Basically whennim playing all of sudden tge wheel goesvout of alignment like the last part of this vid... Im gonna try this an see if i can fix it
@cater4anytink45 yeah try the last bit of the video first mate but doing it halfway through playing usually mean the motor as the glue is overheated. Give the last go a try but failing that, the whole guide is there for you to fix. Mine is version 1 also
Pitstopdiy endorses this video 👌
Thank you 👍
pro tip maybe dont run the wheel at 100% ffb all the time set it like 75% or 50% and turn the ffb up in a game that should fix it and if it still get's to warm "press ST - Mode button" for forced cooling :)
@coleryder3172 good tips. Had my wheel years and it spent the last 3 years or so in an outdoor office, was fine before that then I recently got it back and soon as I used it was failed, dunno if damp got to it or it damaged in transit. I never knew about the force cooling until about a week before I did this fix lol
@@JackTerry87 yeah that sucks great vid though
@@coleryder3172 cheers buddy, hopefully it helps a few people out
Good job Thanx
Hopefully it's a useful video
I can't believe this video was only from a month ago. I'm trying this when i get the jb weld. Is it important that even the little bits of blue stuff are removed? One side of my magnet is really clean but the other side still has tiny little bits. Do I have to worry about those?
@maxmesker562 in my opinion mate, I would think it would be ok to leave the hard blue glue on and just put the jb weld on the rest of the wheel. I only did it as I've mentioned from research and written guids. But yeah I'd say would be fine 👍
@@JackTerry87 Thank you for responding. I'm really happy I found your video. I hope it works!
@maxmesker562 fingers crossed for you mate, if you need a hand then just reach out. It's honestly not as daunting as it looks, long as you've got a steady hand, take your time, you'll be good.
@@JackTerry87 Hey man, thank you so much! My wheel is working again. I hope it will last longer than a month this time😅. Would you recommend changing the fan or power supply? So far the wheel is working pretty good (forced cooling on).
@maxmesker562 oh that's brilliant news, well done 👍. If you used the jb weld and covered as much as I have then should be good for a long time. As for the fan or power supply I've read they can help, but there's also a 3d printed pipe you can get that goes from the fan and directly to the motor, it's ment to be far more effective than the fan change alone. If you look for the Facebook group thrustmaster owners group, look for the pinned post, and a mate of mine has wrote up everything to improve the t300 in great detail, everything's on there. I'm happy it's worked for you, do you find the ffb even stronger than before now? I feel it is, seems much more solid
hello bro can u help me to fix t248 dynamo please just give information and thank u
@kakarotp2e182 I haven't done anything with one but I can try and help, or I'll get gold of someone who may. What's the issue?
When i run the angle motor calibration app , it says "error pre calibration not found" and below "helping the wheel to auto calibrate. :(
@@ggggg895hungary what are you doing it on? A laptop or PC? Maybe uninstall it and reinstall it again mate
Great video, do you fancy fixing mine 😂 Are you near Bolton?
@tog2842 I'm about an hour and a half away from Bolton lol. But honestly buddy it's not as daunting as it looks. Even if you don't have all the equipment, buying it all is still a lot lot cheaper then sending to thustmaster themselves or taking to a shop to repair 👍. Not sure how I feel about fixing someone else's, I'd hate the responsibility of if it didn't go right or did the work and that wasn't the issue lol. But I think I covered most the basics that match those symptoms. I'd say give it a go yourself, and if still not confident to do it's etc then contact me, I'll try and help 👍
@JackTerry87 Thanks man, appreciate it . I will get the solvents ordered and give it a go. Cheers 👍
@@tog2842 good luck. Let me know how you get on