EASY check, TURBO ACTUATOR failure, WASTEGATE FOR TURBES WITHOUT SOLENOID VALVE

Simple, how to check turbo actuator FAILURE. IMPORTANT: this test is for turbos that do not have a solenoid valve and are of fixed geometry with which the Wastegate is closed.
* You can watch this video in Spanish: • Comprobación SENCILLA,...

[@mikejohnson7768]

I see the thing,you know the thing

[@TheDZOLE]

Hello Sir,
I have one question.
I test my wastgate but when i put pressure in the line from turbo to wastgete valve open but i saw also there was air escape from the rod that goes in the wastgate. Is that normal or this wastgate is broken ?

[@sciglassblower]

You must disconnect the rod from the wastegate lever to evaluate correctly.

[@josejoseph2424]

this confuses me further, but then my question is if there is solenoid, this should move when u exert pressure at the port, if its not the waste gate is said to be in closed position due to diaphragm damage or bad solenoid or vacuum leak.. i feel like i am on right track and main problem with this is more fuel get dumped into exhaust and have black smoke. mine got into a point of dilution with engine oil.

[@philipandrew9915]

mine failed I tied mine open and I had power so knew it was bad

[@MdShohel-pn8wc]

Md muslim uddin Bangladesh Dhaka good vi

[@kjshpeel9908]

my actuator rod separated had to get a new car😭

[@biggles9604]

what? you can by new actuators, how you got the money to get a whole ass new car, it blew up?