CRKT Halfachance - MACHETE DESTRUCTION TEST - UNTIL IT BREAKS - 65Mn Carbon Steel - ULTIMATE FAIL
Вставка
- Опубліковано 9 вер 2024
- www.buymeacoff...
Steel: 65Mn Carbon Steel, Ken Onion Machete
MACHETE/KNIFE TEST EXTREME with the CRKT HALFACHANCE -
TORTURE TIP TEST - MACHETE REVIEW - HANDLE got LOOSE
TORTURE TEST - UNBOXING CRKT MACHETE - FIRST LOOK - FIRST IMPRESSION - BENDING CONTEST - IRON ROD - ULTIMATE DESTRUCTION
@ufprogear @Clawgearcom @crkt
I thought the small hollow rivets go through the handle and prevent the blade from sliding out. And a machete should bend not break. I agree with you that`s a bummer.
yeah, overhyped as so much other stuff...
@@joex i own that damn thing but it`s part of the collection. I also own the bark river bravo machete. It would be interesting to see how a 250 Dollar machete would held up against a 25 Dollar Cold Steel Machete 😁🤪
nein, ich schick dir das nicht und ich wills auch lieber nicht wissen den irgendwie glaub ich das cold steel gewinnen würde 😆
@@Kalle_Anka na ge, schicks mir!!!
No man Im looking at my CRKT Chance In Hell and its the same construction. Those silver pins pinch the tang of the blade, they Do Not go through the tang.
I can’t believe the pins don’t even go through the handle ! Unbelievable. They have put tubing into the rubber, there is literally no reason not to put it all the way through. Absolutely bizarre and very disappointing to see. Thanks to you Joe, otherwise I’d never suspected such a flaw
yeah, this is crazy!
It's a scam, a con job.
I think CRKT used "psudeo pins" instead of real barrel pins due to manufacturing reasons. Its an overmold type handle, not scales....although that doesn't explain why the tang was drilled for pins. The good news is, you can take some epoxy putty and press it into the holes in the handle from both sides. This will fill in all the way through the tang and effectively serve as actual pins, securing the handle much better. Theres 4 holes too, so if you do them all its unlikely you will have problems with that handle coming loose.
this is not worth your money!
great job Joe - no one can say you didn't go the extra mile
haha, yeah!!!
Oooooo...!!! A special, collectible "Amphibious Edition" of Mr. Joe X!👍🏻👍🏻
yes! haha!!!
THAT JUMP like Tarzan 🤣👏 and be careful with the bees, they will sting your butt
i don't care!!! haha
I've steered clear of inexpensive blades like these that aren't already a "known entity" so to speak. By that I mean that I know Cold Steel's 1055 is tough as hell and cheap. I think Ontario's inexpensive military machete would be interesting to test. They're also very cheap, pretty hefty, and 1095 steel probably in a soft heat treat. I have a bundle, similar prices to Cold Steels
Ontario, i will try to do them!
@@joex Ontario is a pretty good company for tough and inexpensive. Mostly 1095 and 5160. They make some Ka-Bar variants and machetes and big knives. The SP53 is an absolute beast, might survive your tests haha
I don't like the machete, but the test was brutal good 🔥
thanks!
Ken Onion does some nice stuff he probably did have the rivets actually go through the handle and CRKT did that to it to cut manufacture costs down a little
maybe!!!
Looking at my first production run of the CRKT Chance In Hell right as I type this. Used the crap out of it for 6+ years, did 2 video's testing it. Just noticed now that the blade is about a quarter inch longer than its supposed to be. The blades pulling out of the handle and I didn't even notice. Thats Scarry to me because its almost like you wont know its a problem until you potentially get hurt.
I'm blown away and a little pissed to tell you the truth.
oh wow, thanks for the info, at least you noticed it, but when u have such an "old" model, this means that the handles were back then not too good, and are still shitty now, right? cheers!
@@joex I, like most though those pins or whatever they are were one piece going through the %$#ing thing. Crap in crap out, like Grandpa used to say.
@@NeilTheKnifeGuyhaha!!!
I think, Chanceinhell is more nice and friendly.)
yeah u could say that!"
Joe the water baby knife destroyer has done it again, another one goes to the knife graveyard, love the way Joe puts his all in to destroying and enjoying destruction knife machetes, axes, love watching 👀 these vids hail Joe hail Joe, could be the next Olympic swimmer 🏊♀️ 😀 👍 😉 😄 😎.
thanks margaret, i do swim very fast!
Uk ok
Ken Onion! very good reference
But 1055 South African Carbon Steel still kicking ass!
and very funny that the shovel are harder than the machete
who is this guy?
@@joex knife maker who design the electric worksharp rod sharpener
@@barnishbar aha ,ok thanks for the info!
Direct edge on edge contact makes damage pretty much unavoidable. Not a bad machete though.
nah this is one is shit!!!!
Ottimo joe!!!
thanks!
Cool Video 👍
Thank U I was going to order it...
U saved my money 👍
I'll order the Condor Wastelander...
good choice, Wastelander is awesome, light weight and indestructable!!!
@@joex
Yes Thank U Ur Wastelander test convinced me that was a great test 👍
The steel pole test, AKA the part my wife tells me to turn the volume down for hahaha
i need to talk to your wife!!!!
I would have thought the metal liners on the holes were tube rivets to hold the handle in place but apparently not
no, no screws or anything at all!, mine was brand new from lamnia.com!!
@@joex Well that approach didn't work too well, did it? Sure a machete is not intended for the abuse you put it through but it could be used for a lot of heavy chopping, day in, day out which could result in similar damage, thanks for exposing this weakness
@@thegreyghost2789 no problems with a blade from Cold Steel machetes!! blade not the handle!!
@@joex yes, cold steel all the way!
New sub here JOE X . 🤬Loving your work man .
thanks Darren, welcome to the "freak show" haha
I love the fact he is stabbing that car every demo! This is Sparta on Joe X channel!
i need a new car, nearly everything is stabbed already!
I really enjoy my half a chance machete though just use it properly and it’ll never let you down everything can break under stress didn’t realise that about the handle but I still really love it
ok, but it is shit, sorry!
@@joex Each to their own I really love mine I’ve beat the heck out of it and it’s never let me down nothing is loose at all either am sure I’ll get a replacement if it does fail
Yes you really gave it half a chance
i think i did! yeah!
at some point I hope there's a video showing his best, toughest knives that did best.
I go for cheap Tramontina machetes, South/central American beaters
As soon as you hit it on the shovel and put those deep gouges in it, that's where it was going to break when you bent it.
could be, but wait for my Ontario video..a Machete 12 inch!
The steel tubing didn't go through the steel, on the handle, I'll never buy that mashity/ machete
yeah, this one was bad!!!
Cualquier machete sometido a ese estrés va a romperse. Y esto de la empuñadura sin los remaches si es mala idea.
ok cool!
Hey Joe.
Das Teil hast du ordentlich zerlegt.
Ich hoffe dass ich mit dem Teil wenigstens meine Bambus-Plage in den Griff bekomme.
Zum Spaten spalten werd ich mir aber ein anderes Werkzeug suchen 😂.
Ich wünsch dir eine angenehme Woche.
Viele liebe Grüße
Andreas
danke, ja gute Idee das mit dem spalten!!!! grüße!!
Condor bushcraft parang would be cool to see tested.
yeah, def!.!!
👍👍👍👍👍
Geiles Video Danke 👍👍
Gerne 😁
Can you destroy a Kershaw Camp 10
maybe!
Not a good one, but CRKT has been letting me down for half of the knives I purchased from them. That's why I don't buy them anymore.
ok, thanks for the info cheers!!
😎👍
do you know which of steel is better 1055 or 65mn they say that HRC 1055 can be 61 and the 65mn only 38 this is like soft iron lol, about the machete is a china trap bcs is good looking but not good and expencive ofc you can fix it but this is not proper...
i think 1055
@@joex hm okey thanks
nae..........chance v joe x
oh yeah!
what is the toughest steel it looks like tou should know
i would say 1055 or 1075 carbon steel
@@joex ok thanks man i was thinking maybe that terava 80crv2 stuff might be why dont they use the 1075 and 55 more i appreciate you answering
@@swamprat1177 no problem, Terrava also breaks more easy!!! 1055 CS never broke!!!!
@@joex cool man thanks wich cold steel
@@swamprat1177 1055, all Machetes i tested, the blade did not brake, the handle broke, but not the blade, i tested several: KUKRI, BARONG; JUNGLE; LATIN....
Firrrrst...!!!
yeah!!
Wooooww... That handle's a shameful disgrace. What an embarrassment.
this machete is soo freaking long on the market, and no one ever noticed it?!?! the shit handle i mean!
@@joex
The world just needed an inquiring mind and an adventurous soul, such as yourself, to expose you he truth.
Thank YOU, Mr. Joe X!👍🏻👍🏻
@@nicksweeney5176 haha, gracias!
@@joex
De nada, Senor X.
4:09 🐝🐝🐝"Piss off!!"
yeah, the bees!!
Nick Sweeny, an old face from the Outer light channel, Greetings squire!
@@I-OT-AVAVA-OT-HA-VAYA yeah, greetings!!!!!
@@I-OT-AVAVA-OT-HA-VAYA
Well, well, wellll...!!!😃 Looky here! Yes, indeed, I am he! Greetings and salutations!
The day's password is: "TheTinfoilIsReeeeal".😉👍🏻
In the first place itself it looks like cast iron, ready to break when used rough.I always think that car leaf springs make the best machete.👍
ok, thanks for the info!
Thanks joe you just saved me $70 American. Initially thought the handle would make for a comfortable and durable design but you have proven my assumptions were wrong. No screws in the handle?? On a machete?? Ridiculous!!! Really dumb decision ckrt made, really!!
this machete is so bad!!!
@@joex yeah definitely. I been trying to get my hands on the CS jungle but it's been out of stock everywhere and for a while. Would get a condor but it's kinda pricey for the micarta handles. Anything else you can reccomend that has decent steel and good ergonomics, I really appreciate handles with good grip?
Cold Steel Jungle!
Jawoi!
passt oder!?
@@joexwoi! Haut hin
@@joex 1-2 Schrauben hätten die schon rein hauen können oida
@@lionknives3 richtig, die schwänze!
🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝👊👍
I would’ve thought CRKT would have done better. That handle wasn’t much good. Cool review.
thanks, Cold Steels are Galxies ahead!
@@joex, I only own one Cold Steel at the moment, the Thai Machete. I have the SR-1 lite on order. Just waiting for it to arrive. They’re strong knives.
@@adammcguinness9950 they are!!
Piece of s#%t!!!! Thank you very much for another great test!!!!
u are welcome! greetings!
The handle is a sh it concept.
Fake hollow pins, just cosmetic, show.
You have to punt the screws/pins in the openings yourself then, to make it a little reliable.
Who's going to buy such a machete knowing this. Not me.
me neither!
This is the silliest test ever, how have you not lost an appendage lol and between the accent and the mask it's incredibly hard to understand you bro. I mean u do u buddy just constructive criticism. And it sounded like that knife bout out lasted you so who is tougher???
glad u love it!! love u too!