Resolving problems electrical failure F265 thermostat AUDI A4 1.8t CABRIO Quattro. P1292

Поділитися
Вставка
  • Опубліковано 4 жов 2024
  • It belongs to a set of videos on repairs and maintenance of the AUDI A4 1.8t cabrio.
    This is the playlist of all the videos in the series on AUDI A4 maintenance.
    • Audi A4 1.8t. Cómo des...
    Here is the specific playlist about head gasket repair process videos:
    • Cómo sustituir la junt...
    Individual links to each head gasket repair video are as follows:
    1. How to replace the head gasket step by step. First part. Disassemble front, radiator and intake manifold.
    • Cómo sustituir la junt...
    2. How to replace the head gasket step by step. Second part. Disassemble service belt, alternator, distribution belt and air filter box.
    • Como sustituir la junt...
    3. How to replace the head gasket step by step. Third part. Disassemble various pipes, water pump and cylinder head.
    • Como sustituir la junt...
    4. How to replace the head gasket step by step. Fourth part. TURBO COMPRESSOR, disassembly, theory and review.
    • Junta de culata 4ª par...
    5. How to replace the head gasket step by step. Fifth part. Preparations prior to assembly and purchase of new parts.
    • Parte 5. Junta de cula...
    6. How to replace the head gasket step by step. part six Clean the engine block and decarbonise pistons.
    • Parte 6. Junta de cula...
    7. How to replace the head gasket step by step. Seventh. Replacement thermostat and oil radiator. Turbo mount.
    • Parte 7. Junta de cula...
    8. How to replace the head gasket step by step. eighth part. Installing the cylinder head gasket and cylinder head.
    • Parte 8. Instalación d...
    9. How to replace the head gasket step by step. Ninth. Install timing belt and water pump.
    • Parte 9. Junta de cula...
    10. How to replace the head gasket step by step. Tenth. Installation of the rocker cover, air filter box.
    • Parte 10. Junta de cul...
    11. How to replace the head gasket step by step. Eleventh part. Install intake manifold, alternator, intercooler and expansion bottle.
    • Parte 11. Junta de cul...
    12. How to polish the headlights with the José Luís Calvo polisher.
    • Cómo pulir los faros d...
    13. How to repair the detached rear glass of the soft top in a convertible.
    • Se me ha despegado el ...
    14. How to replace the head gasket step by step. Place the front, clean the refrigerant circuit and replace the hydraulic power steering.
    • Parte 14. Colocar fren...
    15. How to replace the head gasket step by step. part fifteen. Boot and first problems. CELEBRATING 25 thousand subscribers!!
    • Parte 15. Junta de cul...
    16. How to replace the head gasket step by step. Part sixteen. Retightening cylinder head Brexit extension THANK YOU!!
    • Parte 16. Junta culata...
    17. How to replace the head gasket step by step. Seventeenth. REFLECTIONS and Initiating PLAN "B" and...?
    • Parte 17. Junta culata...
    18. How to replace the cylinder head gasket step by step. part eighteen. PLAN "B" failed, oil dripping persists.
    • Parte 18. Junta culata...
    19. How is the head gasket project for the AUDI A4 1.8 turbo Quattro going? Background purchase in U.K
    • ¿Cómo va el proyecto d...
    20. Preparing the car for Pierre's magic IMPORTANT FIND!!
    • Parte 20. Junta de cul...
    21. Pierre's diagnosis and a very long mechanical talk.
    • Parte 21. Junta de cul...
    22. How to change the camshaft seal explained by Pierre. All the tricks and hits.
    • Parte 22. Cómo cambiar...
    23. Assembly II. Permeating the old-fashioned distribution, PCV and more...
    • Parte 23. Junta culata...
    24. We start the car after changing the seal and check that there are no oil leaks.
    • Parte 24. Junta culata...
    25. New problems. It's not fine, fine. Is it the flowmeter or do we set it on fire?
    • Parte 25. Junta culata...
    26. We change the head gasket again in the II Mechanics Marathon with Pierre.
    • Con Pierre cambiando j...
    27. Resolving problems with electrical failure of the F265 thermostat of the AUDI A4 1.8t CABRIO Quattro. P1292.
    • Resolviendo problemas ...

КОМЕНТАРІ • 9

  • @merchegarcia4072
    @merchegarcia4072 Рік тому +2

    Jose Manuel nos dejas con la incertidumbre de saber ……ganas de resultado y que sea positivo!!👏🏻👏🏻😘

    • @ElgarajedeJoseManuelH
      @ElgarajedeJoseManuelH  Рік тому

      Si era eso, y el tema de calentarse el coche, con el nuevo termostato de otra marca diferente, se ha solucionado perfectamente. Ahora sigue tocar avanzando con la restauración de este coche tan especial. Gracias por comentar Merche y por el interés. Un beso.

  • @javieralvarez9146
    @javieralvarez9146 Рік тому +2

    Has tenido suerte José Manuel, si llega a ser cableado....

    • @ElgarajedeJoseManuelH
      @ElgarajedeJoseManuelH  Рік тому +1

      Si, mucha suerte. Si llega a ser cableado o algún problema con la ECU, la cosa se hubiese complicado mucho más. Un saludo.

  • @ricksanchez9000
    @ricksanchez9000 Рік тому +2

    espero que sea eso, una prueba que puedes hacer es medir la señal que llega al termostato cuando debería abrir.
    O alimentar con bateria para ver si actua.

    • @fransantaclara5479
      @fransantaclara5479 Рік тому +1

      Una tontería de avería por la que puedes llegar a tirar un coche….Súper didáctico Jose Manuel, gracias por el contenido

    • @ElgarajedeJoseManuelH
      @ElgarajedeJoseManuelH  Рік тому

      Si, definitivamente era eso. Ese tema ya se ha resuelto. Si lo alimentas con batería no ves si actúa o no, ves que pueda o no coger calor el termostato para luego dilatarse, pero aun así puede no funcionar como era el caso. Un saludo y gracias por comentar.

  • @Toni-kr4fd
    @Toni-kr4fd Рік тому

    puede ser termostato o sensor de temperatura, hubiera sido interesante haberlo comprobado

    • @ElgarajedeJoseManuelH
      @ElgarajedeJoseManuelH  Рік тому

      En este caso no había duda, el escáner indicaba claramente fallo de termostato. Los sensores de temperatura además de no arrojar fallo en la ECU hacían su trabajo perfectamente. Un saludo y gracias por contestar.