An oscillator is a repeating waveform with a fundamental frequency and peak amplitude and it forms the basis of most popular synthesis techniques today. Aside from the frequency or pitch of the oscillator and its amplitude, one of the most important features is the shape of its waveform.
This is the first video that actually made me sort of understand what an oscelator is. Instead of the pros who talk about it as if you already have (basic) knowledge of synthesizers.
Thank you Justin&Reverb- I loved this!!- I am somewhat a novice to the synth world and its vids such as this I find relevant . It was also Justin & Reverbs " Korg Monologue Video" that pushed me over the edge to get my first synth (you guessed it..a Korg monologue)- so thank you Dive deeper-you guys are awesome!
I have not bought my first real synth. I got the ROLI seaboard (not the same I know I know!) but I have been eyeing the Korg Minilogue when I finally decide to take the plunge.
You should get Spectrasonic Omnisphere as your software synth. That way you can blend samples and waveforms. But then get a hardware synth to control Omnisphere so you can adjust parameters with something other dragging your mouse cursor off the screen. lol I mean, if ya don’t wanna ef around, and get right into it. Thats what I’m doing. Screw real work. lol.
I've been building and playing with Synths from around 1966,... before they were even a thing !... through an introductory lecture at Bridgeport University around 1964 by Vladimir Ussachevsky. I am somewhat amazed that most of the videos on basic Synthesis, explaining the principles, by supposedly breaking things down into simple analogies,.. get so much wrong. Like, an oscillator is an electronic device that produces a repeating waveform that is then made audible by using a transducer (speaker) to convert that wave into a variable air pressure wave. Usually the examples of sine/ and square, and sawtooth waveforms are not actually very clean and pure examples of those. In this video the "SAW" has a lot of noise content, so the zero crossings are not exactly equal,... it sounds like there is possible power supply trash slightly modulating the frequency as well as high frequency noise roughening the tone itself. The square doesn't sound like a square at all . (It should have nothing but odd harmonics), so it will have the characteristic hollow clarinet-like sound. These waveforms sound as though they are being reproduced through a speaker and then re- mik'ed. if this "square" wave" tone actually started out as a square wave, it must have been a lot closer to a pulse wave, with quite a different timing between the positive going side of the wave and the negative, as it has lots of even harmonics. I really wish these lecturers would show an accurate oscillogram of the waveforms that are being reproduced and do the video by directly patching an oscillator into a line level input in the computer or filming device so that the purported waveforms have been faithfully converted to wavefiles. Here is another video: ua-cam.com/video/vvBl3YUBUyY/v-deo.html that at least has accurate waveforms; sine and saw, as well as a fairly decent description of F M. synthesis. So far i am not overly impressed with this video.
Nicely produced video. I think that for an introductory video though, the content isn't clear and may be confusing for new comers since you say you are demonstrating basic wave shapes but then you filter them without explaining what is going on.
John L Rice also, no mention whatsoever of sine waves threw me off... There's another comment thread above where that's talked about in more detail. Either way I agree with you. The waveform explanations make sense, and using an oscilloscope for waveform visualizations is great; not explaining a filter or how it works or why it's used though...?Should have at least been mentioned even if it is in one of the upcoming episodes. 👍
Andrej Jahskin Yeah but they can be useless in an analogue synth with a low pass filter. You’d essentially be taking the sound away completely every time you filtered it unless you’re modulating it with another wave, which is basically FM synthesis at that point.
Great video. Question though.... do all oscillators sound the same from synth to synth? I know that different synths have different tools to shape the sound, but at its core basic, do all synths start with the same basic oscillator sound?
In 2002 I had the opportunity to buy a mint condition Mono/Poly with flight case for $400 and I did not. I'm still kicking myself about it , why why why!
Tim Scanlon that’s the life of a synth/Keys player. And musician in general. I’ve let some good deals pass by and some slip away from me, but it’s led me to where l am now. Those Poly 800s are great though. I let go of a DW6000 a while back. Thinking of getting an 8000 this time around. Korg has always been making great synthesizers.
Great explanation ❤️🧘🏼♀️😃🌈 the basics are very inspiring. hmm. 'the basics' sounds like a punk band. I'll do a UA-cam search. they exist. 😃 I found Gotye
Hey, If I wanted to watch this video I would click on it. Plz stop adding to the UA-cam Addpocalypse. I don't need your adds... Also, you didn't mention Sine waves, which is really weird.
What!? His name is Justin delay!!??. Ok, I'm changing mine to Danny Distortion 😋
haha i'm jealous of these sound related names as well...... the electronic artist Objekt has an awesome audio related real name: TJ Hertz
I see ... Tool
Im changing mine to andy attack
he should have a daughter and name her Anna Log 😂🤣
@@DenseSilkyVenom 🤣🤣🤣🤣
Dude you’re Justin DELAY working for REVERB talking about oscillators. Amazing.
Awesome, super basic, but super straightforward for any newcomers!
Its supposed to be super basic lol. Its called fundamentals 😋
Always good to hear stuff retold to you differently, thanks!
JUSTIN...JUSTIn...JUSTin...JUStin...JUstin...Justin...justin... Delay.
Crystal clear. Straight to the point..thanks man for this explanation. I really appreciate it
An oscillator is a repeating waveform with a fundamental frequency and peak amplitude and it forms the basis of most popular synthesis techniques today. Aside from the frequency or pitch of the oscillator and its amplitude, one of the most important features is the shape of its waveform.
Is he called delay? And works for reverb?😂
I must echo that question.
This is the first video that actually made me sort of understand what an oscelator is. Instead of the pros who talk about it as if you already have (basic) knowledge of synthesizers.
Holy shit, I just bought Minilogue and Monologue, this is all I needed right now. perfect timing!
@@megavarj5760 thats what i was thinking, just get the monolouge?
Saw Wave [1:00~ ]
- Saw Wave Strings [1:31~ ]
Square Wave [1:45~ ]
- Square Wave Thin [2:17~ ]
- Square Wave Fat [2:25~ ]
Triangle Wave [2:35~ ]
- Triangle Wave Bass [3:00~ ]
Noise [3:50~ ]
I'm justin delay
Me: Oh we are using our made up names. I'm Parametric Equalizer
@WolfEx67 I'm your dad.
Zabieru McCloud I am Groot
I'm parametric equalizer II, hi
Hello, I'm whammy
DeCay will be the at Top of epicness, but DeLay wins over time.
Thank you Justin&Reverb- I loved this!!- I am somewhat a novice to the synth world and its vids such as this I find relevant . It was also Justin & Reverbs " Korg Monologue Video" that pushed me over the edge to get my first synth (you guessed it..a Korg monologue)- so thank you Dive deeper-you guys are awesome!
So happy this series is happening! Been wanting an intro to synthesis!
Tara Litvack have you bought your first synth yet?
I have not bought my first real synth. I got the ROLI seaboard (not the same I know I know!) but I have been eyeing the Korg Minilogue when I finally decide to take the plunge.
I’ve been thinking buying a Behringer Model D
You should get Spectrasonic Omnisphere as your software synth. That way you can blend samples and waveforms. But then get a hardware synth to control Omnisphere so you can adjust parameters with something other dragging your mouse cursor off the screen. lol I mean, if ya don’t wanna ef around, and get right into it. Thats what I’m doing. Screw real work. lol.
Check out prophet x. Controls most of omnisphere from the hardware.
John Envelope here
Hi John, I'm Willem DaLFO
I've been building and playing with Synths from around 1966,... before they were even a thing !... through an introductory lecture at Bridgeport University around 1964 by Vladimir Ussachevsky. I am somewhat amazed that most of the videos on basic Synthesis, explaining the principles, by supposedly breaking things down into simple analogies,.. get so much wrong. Like, an oscillator is an electronic device that produces a repeating waveform that is then made audible by using a transducer (speaker) to convert that wave into a variable air pressure wave. Usually the examples of sine/ and square, and sawtooth waveforms are not actually very clean and pure examples of those. In this video the "SAW" has a lot of noise content, so the zero crossings are not exactly equal,... it sounds like there is possible power supply trash slightly modulating the frequency as well as high frequency noise roughening the tone itself. The square doesn't sound like a square at all . (It should have nothing but odd harmonics), so it will have the characteristic hollow clarinet-like sound. These waveforms sound as though they are being reproduced through a speaker and then re- mik'ed. if this "square" wave" tone actually started out as a square wave, it must have been a lot closer to a pulse wave, with quite a different timing between the positive going side of the wave and the negative, as it has lots of even harmonics. I really wish these lecturers would show an accurate oscillogram of the waveforms that are being reproduced and do the video by directly patching an oscillator into a line level input in the computer or filming device so that the purported waveforms have been faithfully converted to wavefiles. Here is another video: ua-cam.com/video/vvBl3YUBUyY/v-deo.html that at least has accurate waveforms; sine and saw, as well as a fairly decent description of F M. synthesis. So far i am not overly impressed with this video.
Hi I'm Justin Delay
well hey I'm Chad Soundgoodizer
😂
Justin DeLay, great presentation series on Synth concepts 👍.
thanks for such a professional serie of videos............. very well done.
Great guides for people just getting into synthesis.
Just getting started. Big thanks !
Thank you, Justin.
I learned so much, thank you!
Justin Delay from Reverb hahaha
Thanks! Super useful. Thanks for taking time to explain this
The noise oscillator is ESSENTIAL in synthesizing percussion sounds.
What about sine wave?
Without the hand movements, I don't think I would have understood. 😉 Great video and thank you.
This is excellent. Thank you for making this video.
You make me sorry I didn't buy the MonoPoly instead of the Ensoniq Mirage. It was just a Marage - but the engineers at Emu are wonderful
Thank you so much 😍
I watched parts 1-6, they are very insightful. Now I will never see & use my snth's the same!
i love this , really perfect tutorial
Thankyou, I learned alot. Hope you make more videos, teaching. 💜👽💙👽
Anyone know how to get that deep, purring bass sound he used for the triangle wave at 3:00?
Great video thanks!
what a Classic synth aka the Korg/Mono/Poly Nice
Man I LOVE THIS.
Real name: Tom Hardy
Fake name: Justin Delay
Me: Cool.
Great!!!
Thank You.
Cheers
Really a wonderful lesson. Having a masters in education, I know a good teacher when I hear one, and you Sir, are Top Kek! Brilliant and Thank You!
Very cool stuff! thank you
Hi! Your videos are great! I really loved the oscilloscope part so that we can visualize the wave. Could you tell me which program are you using?
did you ever find out which software is being used? Can't find it anywhere.
Excellent VIDEO Thank YOU 😁😎
Great Video🔥
Nicely produced video. I think that for an introductory video though, the content isn't clear and may be confusing for new comers since you say you are demonstrating basic wave shapes but then you filter them without explaining what is going on.
John L Rice also, no mention whatsoever of sine waves threw me off... There's another comment thread above where that's talked about in more detail. Either way I agree with you. The waveform explanations make sense, and using an oscilloscope for waveform visualizations is great; not explaining a filter or how it works or why it's used though...?Should have at least been mentioned even if it is in one of the upcoming episodes. 👍
I marathon this series just to learn how to darn use my sy1000
Thanks for your help, it makes understanding synths easier. Which software are you using to monitor waveforms?
Anyone know what he's using to visualize the waves?
maybe I'm dense but the sawtooth and the square sound exactly the same to me...i keep moving back and forth between them to check
man you"re using some heavy old school hard ware rightcha. monopoly is classic stuff! great video!
excuse me please, but very basic oscillator is sine wave. hovewer big up for this range of videos
Andrej Jahskin Yeah but they can be useless in an analogue synth with a low pass filter. You’d essentially be taking the sound away completely every time you filtered it unless you’re modulating it with another wave, which is basically FM synthesis at that point.
Haut Strange thats true.
Great video. Question though.... do all oscillators sound the same from synth to synth? I know that different synths have different tools to shape the sound, but at its core basic, do all synths start with the same basic oscillator sound?
Thank you!
What spectrum analyzer or shape analyzer are you using?
Beautiful
If you want to know everything about synth sounds, try software: synthorial. Best shit eva...
Very nice 😎😁♥️👍
Well, thank you monsieur delay
1:00 saw
1:46 square
I really can’t take it seriously when his last name is delay🤣🤣🤣
Thanks!
Umm..hello. Aren't all these derived from the sine wave ?? (except from noise)
I'm surprised there was no mention of sine waves. And also alternatives terms like ramp and pulse.
Do you have a sine wave, I want to hear a sine wave
Te ganaste mi subscripción
Hi Justin Delay, I'm Ben Frequency Shifter
Just what I need!
Thanks!
*',:*D*
Thanks :)
What about LFO’s?
In 2002 I had the opportunity to buy a mint condition Mono/Poly with flight case for $400 and I did not. I'm still kicking myself about it , why why why!
Tim Scanlon $10? I’d be kicking myself too. Maybe Behringer will reissue them as well ;)
Edit: pounds. Sorry. Still incredibly cheap.
Tim Scanlon that’s the life of a synth/Keys player. And musician in general. I’ve let some good deals pass by and some slip away from me, but it’s led me to where l am now. Those Poly 800s are great though. I let go of a DW6000 a while back. Thinking of getting an 8000 this time around. Korg has always been making great synthesizers.
I was lost by :16. Is "Synthesis" a specific product or is that another term for "synthesizers"? (Plz help..)
Justin Delay Thx! (Says out of touch guitar player!)
Please suggest me a name -- Rajesh Reverb or Rajesh Resonator ?
I was like “what’s this guys name again? Jonny Reverb?”
Came from the ad...had to look at it again
Where do you get those wave frequency visualisator?
I need to know this too, does anyone know?
how is he smoothing the edges like that?
Turning the cutoff down, which does exactly what it looks like and “smooths” the sound out lol
Justin Delay working for reverb... TRAITOR😞
Tom Hardy? Since when you synthesizing?
Justine Delay, from Reverb.,......
Great explanation ❤️🧘🏼♀️😃🌈 the basics are very inspiring.
hmm. 'the basics' sounds like a punk band. I'll do a UA-cam search. they exist. 😃 I found Gotye
did you forget the sine waveform?
gabriel mario the sine waveform was kind of shown in the saw
bUT WHAT ABOUT PULSE AND SINE WAVES???
Your title confused me. I thought Reverb has something do with Synthesis.
👍🏿
if I had a synth name mine would be ADelaDelay
hi i'm david sidechain compression
Are you Tom Hardy ....???
justin delay 😀 how late you are
NEEEEEEEERRRRRD!!!!!!
I hope so!
Looking forward to the series, but the first second of the intro made my ears bleed
omg... you're using a mono/poly........ want!
Merzbow be like: 3:50
dELaY
2020: 5260
No one:
Not a single soul:
Comments: *Bullies a guy with a surname, “Delay”.
As if he's called Justin Delay.....
Justin Delay? On REVERB? What a joke...get out of here man...
Hey, If I wanted to watch this video I would click on it. Plz stop adding to the UA-cam Addpocalypse.
I don't need your adds... Also, you didn't mention Sine waves, which is really weird.
gay